Receives the following message when you try to open a project, "Captivate cannot open the fol.

Similar Questions

• Received the following message when you try to install Photoshop CC "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "So I use Windows Vista not sure do I

  Hello

  I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »

  I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.

  CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.

  System requirements | Photoshop

• Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?

  Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?  I'm on a MAC Version 10.13.3.  Thanks for the help!

  to do this, you will need to contact adobe in the pst time support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  but they can refer here for help and no one here will (or should) have on your computer.  If they do, or someone offers to contact you via Skype, you're about to be a victim of fraud.

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plugin is not recognize the format of my new Nikon D610. I've updated the version of my Camera Raw plugin and still get this message when you try to open pictures in photoshop. Please

  I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plugin is not recognize the format of my new Nikon D610. I've updated the version of my Camera Raw plugin and still get this message when you try to open pictures in photoshop. Help, please.

  This link shows that 8.3 ACR supports the Nikon D610 and 6.7.1 was the final version for CS5.

  Camera Raw plugin | Supported devices

  If you can switch to CS6 and ACR 8.7.1

  or using the DNG converter, convert your Nikon raw files to DNG to open in CS5.

  Here is the download link: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1

  or Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7.1

  And here's a great video tutorial on how to use the converter.

  https://www.YouTube.com/watch?v=0bqGovpuihw

  Gene

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• Windows 7 - get this message when you try to open a file. Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  When I left click on the icon to open the file, I get the 17 ' error '. "  I right click on icon and select "run as Administrator'l and it will open, but lately it won't and the message above."

  Hi Bob,

  1. in open file are you get this error message?

  2. don't you make changes on the computer before this problem?

  This problem may occur if one of the following scenarios arises on your PC.

  • You do not have permissions for the file or the location of the file.
  • The file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer.
  • The file has been moved or deleted.
  • The shortcut or the file is corrupted.
  • The file may be blocked by Windows.
  • Your anti-virus software may block the file.

  Refer to the help article:

   

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk.

  Response with more information to help you.

• Error message when you try to open the virtual machine

  I installed fusion and transferred to my virtual drive but when I try to open it, get the following error message.  "Could not open the disk ' / Users/wilke/Desktop/Windows/Windows.vmdk' or one of the snapshot disks it depends." Reason: cannot lock the file. »

  I followed the steps in the video on the Web site.

  Try the solution offered by oreeh the link provided below:

  http://communities.VMware.com/thread/197745

• Error message when you try to open the LR5

  LR5 on my Win 7 64 bit PC crashed and I had to force it to close and restart my PC. Now when I try to open Lightroom I get the message error "the Lightroom catalog cannot be opened, it is used by another application. Leave the other copy of Lightroom before launching"I have no copy of Lightroom running, any help please?

  Look in the folder Lightroo (in images by default) and delete the file ending with .lock...

• I get an error 126, openal32.dll error message when you try to open and play games. How can I fix it?

  I have a desktop computer that has Windows XP on it. For the last 2 months, whenever I have buy a game or you try to open and play a game I get an error message 126, openal32.dll is not found and the game does not open. How can I fix? Thank you

  Hello

  ·         What is the brand and model of the computer?

  ·         The game you are trying to install?

  ·         The issue is only with game in particular or all?

  ·         Have you managed to play this game before? If so, were there recent changes made on the computer before the show?

  Follow these steps and check if that helps.

  Step 1:

  I suggest you to uninstall and reinstall the game and check if it helps.

  How to change or Remove a program in Windows XP

  Step 2:

  OpenAL is related to sound and developed specifically for the audio of the game, I suggest you to update all the required drivers for the computer from the manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP

• I get this error message when you try to open Word. "This action is only valid for products that are currently installed" ERROR (code: 1605?)

  I get the above error message everytime I try to open microsoft word, excel etc. and it also appears when I try to open Itunes/Quicktime. I tried opening other programs and they work all (acrobat, Media Player etc.)

  • Recent changes made to your computer - I was getting the error message displayed by this link here: http://discussions.apple.com/thread.jspa?threadID=948432&start=15&tstart=0 I made the changes suggested by Ebody and it didn't work so I changed it back.
  • What you have already tried to fix the problem - I downloaded the service pack 2 for office see if that would eradicate the problem, but he says that there are no products affected by this package installed on this system.
  So I'm at a lost to know what to do and I have work I need to access! any help would be greatly appreciated!

  Hi Steve,.

  Thanks for the reply again, I just did a Tassel factory by pressing F8 at startup upward and then through the options and make Factory Image Restore (after saving the contents of the hard drive to external hard drive) which took about 5-8 minutes after the return and then re-installed all my programs etc. , and everything works fine!

  So I say this to all who have the same problem and no other method does work, simple - easy - fast!

• Error message when you try to open Acrobat

  When you try to use Adobe Acrobat, I now get a message every time saying: ' Adobe Acrobat has been installed as part of a suite. To activate Acrobat from Adobe, please start another component of this suite (e.g. Adobe Photoshop).

  Hi candaced46137421,

  Please see this KB document for help error: "Acrobat 8 Professional cannot be launched. Adobe Creative Suite 3.

  Kind regards
  Nicos

• Why do I receive an error message when you try to publish the deployment package animate?

  I constantly receive the following error message every time I try to publish a deployment animate package.  I don't know what is Poster3.png.  There is no image in my file with this name.  I tried to save my publication with a new name and is not the problem.  I have no idea how to solve this problem.

  

  You can get this error if you did the following:

  -Create a comp and save

  -publish to OEM

  -remove the poster in file system

  -publish again

  Workaround solution:

  • Go to the publication, click on stage and generate an image of the poster in the properties panel.
  • Now publish again.

  I would like to know if it works.

  -Reynaud

• Error message when you try to open the project in Captivate 9

  Hello

  I have a huge problem with one of my projects. It was working fine and that it was completing something happened. One of my coworkers opened to check the faults of grammar of last minute, and when she tried to save him and it took him a long time she decided to close it. which resulted in the error "not responding" and the screen is empty. After this incident, non of us can open the project. When I try to load it goes to 10%, and gives me this message.

  Needless to say that this is the only copy and I really don't want to repeat the same project from scratch. Could you guys please help? Any suggestion is appreciated!

  Can you check if it's "locked" files on a system?

  You do not check the backup option in the preferences? It's always the first thing to do when you install or patch Captivate.

  The cache folder may be a secondary cache if you can identify it, you compress the folder corresponding to the date that you have finally opened the project.  Do not clear the cache at the moment.

• BlackBerry Smartphones the Error Message When you try to open AppWorld

  I downloaded AppWorld on my phone and when I tried to open it I got:

  Error starting net_rim_bb_appwprld: Module ' net_rim_bb_appwprld-6' not found.

  Why did I receive it and how can it be solved?

  Thank you!

  Thank you. I finished the download again and everything worked.