Receiving a few iMessages on rMBP only.

Yes, I know, there has been problems with this in the past. I searched the forums extensively.

Initially there were only one or two people only appeared on my rMBP Messages, and I swept.

Now, it degrades, and I have about 6 people who I can only text me through Messages on my cell phone. It happens to iPhones and other similar. These messages on my phone at all. It's bad because I often miss business texts since they were sent to my laptop and not phone.

I tried logging in and out of Messages, as well on the phone, then the phone with no luck. Then I got fed up with it and reinstalled OS X 10.11.5 and iOS 9.3.2. Still not good.

I have both iOS and OS X messages set to send and receive on my phone number and the Apple ID and to start new conversations of my phone number. Text message forwarding is enabled on my iPhone

Someone at - it suggestions? It gets worse

mrenda wrote:

Yes, I know, there has been problems with this in the past. I searched the forums extensively.

Initially there were only one or two people only appeared on my rMBP Messages, and I swept.

Now, it degrades, and I have about 6 people who I can only text me through Messages on my cell phone. It happens to iPhones and other similar. These messages on my phone at all. It's bad because I often miss business texts since they were sent to my laptop and not phone.

I tried logging in and out of Messages, as well on the phone, then the phone with no luck. Then I got fed up with it and reinstalled OS X 10.11.5 and iOS 9.3.2. Still not good.

I have both iOS and OS X messages set to send and receive on my phone number and the Apple ID and to start new conversations of my phone number. Text message forwarding is enabled on my iPhone

Someone at - it suggestions? It gets worse

As long as you are connected to the exact same Apple ID on your Mac and your iPhone, there is nothing that should only go to your Mac that was sent to your phone number. This is the right way to him. Things to check would be that you check "you can be reached for the messages to" article of iMessage in both devices. On Mac, Messages > Preferences > accounts. On iPhone, settings > Messages > Send and receive. Make sure that all addresses are checked on both devices. If someone has sent their message to an address that is not configured to receive on your iPhone, it will go only to your Mac if that is configured to receive via this address list.

I also guess that you still have ownership of your phone number for making phone calls and SMS Messages with your carrier, Yes? As long as you do, and what I mentioned above is in place, I'd get Apple of Contact for support and service - Apple in charge. Support is currently free, and if it came to this day, they probably need to collect some capture data and climb the logs to an engineer for review as to the cause of this problem.

Tags: iPhone

Similar Questions

  • I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

    I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

    How to use several devices iPhone, iPad or iPod with a computer

    Using more an iDevice on the same computer

    This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

    On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

    First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

    If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

    Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

    Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

    The above was created by the user randers4. Changes were made to improve the readability and the syntax.

  • My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

    My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

    Settings > messages > iMessage turn off then turn it back on...

    If it does not sign of your apple under messages ID.  Settings > General > reset > reset all settings (will not erase data).

    Then log in messages

  • txt on the new iPad 2 Air messages only works with other Apple users.   How to send and receive SMS users iMessages?

    I can only use iMessage on my new iPad Air 2 with other Apple users.    Why can't send and receive text messages with SMS people?

    You need an iPhone and then use continuity iOS features to do - continuity use to connect your iPhone, iPod touch and Mac - Apple Support

    An iPad is natively unable to send SMS text messages such as those that require a connection of cellular voice channel.

  • iPhone 6 receive do not iMessages.

    This morning, I missed a few messages on my phone. They came by fine on the iPad.

    i Went to settings, messages, send and receive.

    my email is checked, but my phone number has the wheel spinning next to him.

    This must be the problem. Any ideas on how to solve it?

    PS I have a teenager that can have accessed my account... connection?

    Try disabling iMessage on the iPhone. After that, do a reset on the phone, press and hold the home and sleep/wake together until you see the Apple logo and then release. The phone should restart. After that, go back to settings > Messages and turn iMessage turn it back on. Wait for it to activate. Once it activates to verify that your number is checked.

  • With El Capitan in imessage, I can only send short texts. I send several separate texts.

    With my replacement new iPad 2 Air I can only send short messages. Texts will not result if the content is more than a few brief sentences.

    I don't know what has to do with your iPad 2 Air El Capitan. If the person with you Messaging uses no iMessage then text message SMS you limited to 160 characters.

  • Disappread name of the left in iMessage column shows only photo

    The column on the left in iMessage on my mac is only showing pictures and the display is no longer names.  How can I change the display to show again the names as photo?

    Hello

    If you caught the division between the list in the sidebar and the Chat box and then he left you can reduce to only Headshots/photos for your Contacts and friends.

    If what you see?

    20:01 Thursday; February 18, 2016

     iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     a few iPhones and an iPad

  • my email receives the e-mail and sends only very short. Nothing more wrong through and I get this error message

    As my title States I can receive email fine, attachments and all.  But when I try to send email I can send only very short.  Nothing more and I get the following error message:

    An unknown error has occurred. Subject 'test', account: ' pop - server.triad.rr.com', server: ' smtp - server.triad.rr.com', Protocol: SMTP, server response: ' 421 4.4.2 service timed out. ', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67

    It started just yeaterday, everything has been fine so far

    Thanks much for any help!

    Glad you solved it.

    It can be compacted at this place. There is an option to compact the database on shutdown after X works.

    If you keep WinMail open most of the time and let the computer sleep, place during about 10 tracks. If you open and close WinMail daily, place during about 75 ~ 100 races. When you close WinMail and have reached the setting chosen it will inspire you to compact. It is enough to click OK and don't do anything until it's done. It should take only a few seconds if you do this regularly as stated above.

  • I can't receive news in imessaging.

    I can't receive the news in imessages.

    If you need to Reduce Motion activated, you will not be able to use the new features of iMessage.

  • Unable to send or receive photos in iMessage on LTE of wifi.

    Recently upgraded to the iPhone 5 s 6 s more, I've never had this problem before, but whenever I try to send a picture, he attempts to send and then I get "failed to send message." Also whenever someone tries to send me a picture, I get "tap to download" and then it never downloads. Is there s solution for this? Is this something on the end of Verizon?

    You must follow a few steps:

    Stop and restart iMessage and FaceTime

    1. go to settings > Messages and turn off of iMessage.

    2. go to settings > FaceTime and turn off FaceTime.

    3. restart your device.

    4 turn on iMessage and FaceTime.

  • One of my friends does not receive my texts / iMessages or calls?

    She has an iPhone 5 c, I a 5s (latest iOS). shes quite clumsy with his phone while she lays a LOT so it has problems but I don't know if this has something to do with the problem at hand. It doesn't have me blocked btw. Whenever I have text or iMessage sound he says delivered and all, but her side that she never receives it. She has a MacBook so she can actually see and respond to everything I said from there. I tried to call to see how many times he could sound. He rang 5 times than voicemail (I have AT & T and she has Verizon). 2nd time around it rang once and then voice mail - so his phone could be dead or something idk. What should I do to see if this problem is on my side and how do I fix? or what to do?

    There is nothing you can do on your side.

    She must talk to its supplier and maybe take a bar make genius for an assessment.

  • Continuity and iMessage synchronization works only on iPhone... not!

    I always be using iMessage and continuity of receive/make calls on all my devices iOS and Mac (all updated to the latest iOS/OSX).

    Recently, I noticed that even if iMessage works on all devices, iMessages are synchronized nor on my iPhone. That is, some iMessage I write on my iPhone that stays on my iPhone and don't appear on my Mac and on my iPad, everything I write on my Mac or iPad, he synchronized between the two devices except my iPhone.

    Phone calls cannot be forwarded to my iPhone from my iPad or Mac more.

    All settings look okay.

    Any help please?

    Hello Jet787,

    Thank you for using communities of Apple Support.

    I see that are not messages that you do on your iPhone to your Mac and your iPad and your Mac messages do not appear on your iPhone.  I would like that you first make sure that your phone number is configured on all your devices and make sure that it is the method that you use to send and receive your iMessages.

    Add or remove your phone number to iMessage or FaceTime on your Mac, iPad, and iPod touch

    Take care.

  • I can not receive or send iMessages to a single contact.

    Hello

    I never had a problem with my girlfriend until iMessaging recently as she got a new contract sim. She has an iPhone itself but now for some strange reason the feature iMessage does not work between us. I can't send or receive any iMessages of her but we are both able to iMessage other people. I tried all necessary helps out as my phone reset, reset network settings, deleting the contact / conversation and their reopening etc. but it is not yet been resolved. I don't know why it does not detect that it has an iPhone that I've never had this problem before!

    Sort the question!

    My girlfriend had to:

    • Turn off iMessage
    • Uncheck all emails/numbers, you can send receive
    • Repeat the same steps for FaceTime and off FaceTime
    • Restart the iPhone
    • Delete the cat once the iPhone is back
    • Turned the iMessage & FaceTime back

    And the problem solved!

  • need to put a download in report page button and clicking on it, only few columns will download (only specified)

    Hello

    I need as I put a download in report page button and clicking it will download only few columns (only specified). I use Apex 4.2.

    Please give an idea.

    Thank you

    Chebli

    Action-> download-> when you click the CSV, it will send a request like "CSV". Change the columns that you want to include in the output csv file. Go to the Condition section,

    Condition type: request is NOT contained in the Expression 1

    Expression1: CSV

    This column will not include in the csv file.

    Thank you

    Lacombe

  • A few specific characters appear only after the introduction to the keyboard key twice in Inspiron 15R 5520

    Dear all,

    I am facing a very strange problem in my Inspiron 15R 5520 I bought in August 2012. There are a few characters that only appear after typing the corresponding button on the keyboard twice.

    for example if I want to type a tilde (~) character, I have to press the fear side of the number key 1. But, if I press it once, nothing appears on the screen. If I press this key twice, then I get two characters tilde (~). Same behavior occurs with four other characters. Below is a list of characters that do not show by pressing the button once, rather than twice.

    ~

    `

    ^

    '

    "

    Surprisingly, when I was typing shift + 6 in the field of the composition of this forum, then the sign of the (^) character appeared after press the key once. Whereas, if I try in Notepad or Word Pad or the Mozila FireFox address bar, I have to press the key two times so that character appears twice, and then delete the extra character.

    Can you help me please?

    Thank you

    Gerard

    The problem is with the keyboard language setting. You may have selected English (International) while setting up your laptop / desktop at the beginning.

    Go to control panel of-> all items from Panel of control-> region and language-> Formats.

    Change Format English (United States). It should solve your problem.

Maybe you are looking for

  • Cannot print on Toshiba e-studio163

    I have a Toshiba e-studio163 plugged by UBS to a pc. I share the printer with other computers can access also. but the problem is when other computers on the network to install the printer, after the successful installation, when I send a file to pri

  • Application of Intel speedstep

    Is it not possible for the HP engineers to give us all a bios where we can turn off the Intel speedstep please? It causes no end of problems and would be better to give the user the decision.

  • Computer restarts when I try to open the Canon software.

    Original title: I recently installed a Canon PIXMA MG5320 printer wireless and all related software, now when I click on one of these icons to program my PC reboots. I recently installed a Canon PIXMA MG5320 printer wireless and all associated softwa

  • Start testapp error "Module: TestApp-1" must be signed with the Runtime RIM signing key code

    Hi all Help me please I signed my code files with the signign provided blackberry (RRT, CPR, RBB) keys. When I download my application via OTA in my camera, and when I run my application it shows an error like "start Testapp error: ' Module: TestApp-

  • BlackBerry smartphones can HP fax/printer "dial out" through 7130 or model later?

    I own a Blackberry 7130 and have no phone land line to my office. I have suppliers who only receive orders by fax or mail. Is there a solution to connect my HP 5500 fax/printer to the 7130 and "dial", send the fax? If not, is there a newer model with