Receiving a message and that I try to activate Windows with the product key is already in use.

Similar Questions

• Try to activate Windows, error: this product key has already been used on another computer

  (Original title: Hi I get this key product and equipment repaired already in use)

  How can I fix? any suggestions please? I can't activate my windows because it says that it has already been used, the cause of this is my equipment got repaired and when he returned he disabled just, please

  I tried to enter my product key for windows, and he just said "this product key has already been used on another computer" but that is the only computer where I installed my Windows 8, I tried the method by which you must contact their office by the number of the machine and you must give them 9 packed numbers and enter this told you on the phone. But I can't contact then given the number of the machine and also I tried to send the technician takes charge, but it did not help, I need help badly please. Thank you.

  Hi Christian,

  I understand that after getting your equipment repaired, you cannot activate Windows 8.

  As the ID of the product gets changed every time the internal components of the machine are modified and when you try to activate Windows it identifies it as a machine to new or different.

  I suggest you contact the support phone or chat for assistance with Windows.

  See the link below for the number of support:

  Global Customer Service phone numbers

  http://Support2.Microsoft.com/GP/customer-service-phone-numbers/en-GB?WA=wsignin1.0

  You want to chat instead, check the link below:

  http://answerdesk.Microsoft.com

  Hope this helps, get back to us if you need further assistance for Windows.

• My Pc crashed and I need to reinstall windows, but it indicates the product key is already in use

  It gives me the msg of error that my product key is already used, but I do not use the old hard disk which is crushed for anything other than back up now, so it doesn't matter if I can't start Windows on this drive.  I bought a new drive and want to install windows on it.  My question is: How do I disable my last windows installation so that I can activate it on the new?  I am running windows 32-bit Home Premium.
  Thanks for any help.

  You can reactivate your Windows Vista installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3 select your country.

  4 follow the instructions for the activation of the telephone (toll-free).

  Carey Frisch

• I installed Windows 7 on my laptop using the original disk, but trying to activate it with the product key, it says that I can't use it. Any ideas anyone.

  I reinstalled Windows 7 on my laptop replacement (top/the original was damaged), but when I entered the product key Microsoft will not accept the number. All solutions anyone?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• Activation of reinstalled Windows Vista - the product key already in use message

  My system crashed - continueously runs blue and the cause was the motherboard. Replaced the motherboard and making it to level the motherboard and processor. The new motherboard and processor are compatible with Windows Vista. After you have reinstalled Windows Vista activation using the internet's message that the product key is already in use. What should do?

  If and only if you have a Vista "commercial" version, then you can try the phone activation.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• I have re installed Windows vista on the same computer laptop and now its says product key is already in use.

  I had Windows vista on my laptop after 1 year I had to re install windows, but now its always tells me that the product key is already in use (I use the product key for the same computer laptop I installed previously on).

  Please tell me why this is happening as I am once again the installation on the same laptop.

  Thank you

  I see what is the problem.

  You have a corrupted Licnsing store-

  Please try the steps below to re-create the store with the correct data.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.

  You may need to enter your COA key and activate it.
  Once complete, run another report MGADiag and post back with the results

• I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard

  Update product key

  I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product key

  You must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.

  Read your manual, on the recovery of the system and try the options there.

  If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.

• When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  KiranS Hello,

  Judging by your post, it seems that Microsoft had technical problems when you tried to activate your copy of Vista by phone. Have you tried phoning the line Activation again?

  The normal procedure is that if the activation fails through the automated system, the call is transferred to a real person. It is the only available option if you get the error 'use existing product key'.

  I can only suggest that you try again the activation by phone and see what happens.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key

  I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key or any body help, I can't use it

  You must order a set of recovery disc for the computer from the manufacturer - this will install the appropriate drivers for your system automatically, as well as packaged applications.

  If you have not formatted the disk (or replaced) existing partition recovery may still be present - see your manual for details.

  It is possible to download Vista - see here for more details - http://www.heidoc.net/joomla/technology-science/microsoft/57-windows-vista-direct-download-links -, but note that it is not a simple process!

• After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time.

  After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time. I tried to activate using automated phone system, but could not do. What is the solution. I know that this product key I used only on my current desktop & in past I had not faced any problem on reappattage. This time, I had deleted all the parks & reformatted all readers of my Win7 teacher reappattage. This can be a cause of failure of activation?

  Direct activation number: (888) 725-1047

  1-800-936-5700

• Hi I need to move my cs5 to a different cpu and do not have the box with the product key

  Hi I need to move my cs5 to a different cpu and do not have the box with the product key

  Quickly find your serial number

  Mylenium

• Received a message that my product key is already in use when you try to install Windows 7.

  I tried to install windows 7 with product key and got my pin code and know I can't further. If I put in the product key, it tells me that it has been used already

  I tried to log back to install my product key # and he tells me its been used. I have my PIN # so what do I do next?

  Use the Activate by phone and speak to an operator

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need by phone
  ansafone, don't answer - it should oblige the operator to answer, which can handle
  with you.

• Receive error 0xC004E003 code when you try to activate Windows 7.

  Windows Activation does not work!

  I wanted to do a clean install of windows 7 pro, so I erased the hard drive, then re-installed from disc. Now I can't turn it on, I get the error 0xC004E003 code. WU does not work.

  you use an OEM SLP key that works only when the OEM recovery media is used. It can be activated by normal means.

  You need to change your product key to the one on your COA.
  Click Start, type slui 3, press on enter.

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COST SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• can't activate windows xp with the product key that came with the computer

  I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds.  Every thing I did to clarify apparently nowhere got done or made it worse.  At the end of the day, the computer would only begin to restart, stop after the start of the HP logo screen, then start to boot, etc and more.  All I could do was to install the hard drive in another computer and format, from scratch.  Now, I'm trying to install the system to XP op for the disc that came with the computer.
  the problem: the code the product key on the case went wrong with the disc.  After searching for solutions, I found a code on the disk by searching the files it contains, tried and it worked!  Problem is when I try to turn it on, it says it's an "unauthorized product key."  I tried to enter that code on the box and who says he is "invalid".  The Cd look authentic; are for distribution with new pc HP and Compaq.  After a further inspection drives are XP Professional SP2, while if it is XP Home Edition.  What gives?  Activation does not anyway. It is any use that will not make me buy a new set of disks?

  Please let me know if more info or detail is necessary.

  PS - only a single piece of hardware has been changed - the cdrom initially provided with the computer was bad, so I went out to perform the installation.

  When you perform a restore to the factory on some HPs condition you have two choices: 1) a restoration which keeps your data and programs (in a repair installation); (2) a full destructive restore which brings back the machine to the State, it's when you first opened the box. In your case, you have already wiped the drive, so the question is moot. I would call the HP technical support. Normally when you use an OEM recovery media (HP, Dell, etc.) a product key is never required during the restore. If you have used the media to restore HP shipped with your system and are always asked for a key and one on the sticker machine is not accepted, then something is certainly. MS - MVP - Elephant Boy computers - don't panic!