Recent Ms update causes of lag when you use win + L, alt + tab to switch apps or ctrl + alt + delete

Similar Questions

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• When you use the new button tab is open a new tab, with a search engine that I don't want. How to change this to make it possibly open my home page?

  When I use the new button tab in the tab tool bar, it opens the Yahoo! search engine. I would like to change it to open my home page, or a search engine different. Is it possible to do it and how?

  Thanks for any help!

  I think that is changed by an extension. If you run Firefox in Mode safe search engine comes up when you open a new tab? http://support.Mozilla.com/en-us/KB/safe+mode

• Little lag when you use the Tablet Wacom on LR6 and Windows 10

  Hello, I have recently upgraded to Windows 10. I have the latest version of Ligtroom 6.

  When I use my Wacom Bamboo tablet and try to move a cursor, initially it does not, move initial position, it climbs to approximately + 5 or - 5. If I continue to slide, it follows then correctly my movement of the stylus.

  I tried to reinstall the drivers, but it didn't fix it. He nevere, that has happened with previous versions of Lightroom and it does not occur with any other application.

  Is this a known bug?

  In the Wacom tablet properties / Grip Pen / Mapping of audit of the tab to see if "Use Windows Ink" is unchecked.

  (It was the fix/work around in previous versions of versions/LR pilot).

  It looks like when you improve either LR or your Wacom driver, that it gets reset back to the manufacturer.

  When I was with LR2015.1 I had to have the setting ink disabled Windows so that the Wacom pen works properly

  Just check now and in ink of Windows LR2015.2 has been activated and it works well.

  I have not yet upgraded to LR2015.2.1 to see if I need to disable Windows ink again to make it work with this latest version.

  Currently my Wacom driver is 6.3.14 - 1 (don't has not amended it LR 2015.1 to LR2015.2)

• Find the cause of UNEXPECTED_EXCEPTION when you use the SOAP API.

  I wrote a cloud connector that gets a UNEXPECTED_EXCEPTION fault for any entity that I am trying to update.  I use java with code similar to the example of the principal operations update the online documentation.  There are some newspapers that I should look in to find out what is the unexpected exception, because the details in the UpdateResult are not specific?

  Thank you.

  I realized what was causing the problem.  During the creation of the DynamicEntity I was using member.getID () when I should have used the member.getEntityID ().

• Transition control updated in the calendar when you use Merc. Engine with CUDA or OpenCL

  Hi-

  This seems to be a BUG in the Mercury engine (unless I'm missing something obvious) ;-)

  (1) I apply a simple cross fader to two clips

  (2) I'll select cross dissolve and goto control effects (to make it look like to the right)

  (3) in the effect options, I see the A to B-frames change as I drag it controls. As they should.

  (4) they do NOT update in the timeline

  IF I pass the software only Mercury engine... The chronology updated very well...

  If CUDA or OpenCL... The same problem and makes this VACUUM function when it is used either with...

  All the fix and workaround advice would be greatly appreciated...

  Setup

  rMBP - 1 GB NVIDIA Graphics - Mountain Lion 10.8.2 - agency Latest

  Just spend an hour with the support... They were GREAT... Remote controlled my CPU etc... Really GREAT support...

  Anyway, as I suspected: that IS a BUG. The support person confirmed on a Mac and PC and lift the case to the engineering team...

  Great ;-)

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• I updated my ipad ios 9.2.1 and when you use safari, it crashes

  I've updated 9.2.1 on my ipad and now my safari crashes when you use the keyboard

  Here's my own list of the fixes suggested trying who helped many former users of iPad.

  A warning:

  I make no warranty, express or implied, that any PART of my patches suggsted or solutions will fix/restore each older iPad on his former status of operation

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  For additional questions to Safari, try disabling Safari Suggestions found in the settings app in the control panel settings of Safari. Press Safari and in the right panel, look for the Suggestions of Safari and turn this option off to disable this feature.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• Cannot update files have point 8.1 of Windows when you use illustrator CS5.1

  A really weird problem started today.  I am able to open and work with the files have.  However, when I save the work, the original file exists, no not update work.  I closed and open the AI and restarted the computer.  But I'm still in the dark. Can I save my work under a new file name.  Hoping someone solved this problem without reinstall illustrator.

  Washio,

  I remember my having seen this (or similar) issue before, but I can't seem to remember the cause/solution.

  He could have (something on) the list below. "resettlement is the last resort 6). ((1-2) are easy and safe. (3-4) are on preferences, ireversibly and reversible. (5) is a collection of other options, some of which may be relevant.

  I also mentioned something on external downstairs, in case that can be taken.

  In any case, I hope that you report your findings, for each of us to know and remember (I hope).

  Sometimes, (some) things can stop working for no apparent reason. When (other) possible reasons/remedies do not work, it can be a kind corruption (temporary or permanent) that can be cured with something on the following list. It starts with a few easy suggestions and safe) 1 and 2) for less severe cases and continues with two 3 ways) and 4) preferences of the society (irreversible and reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how far to go.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

  External media: it is generally recommended here for open/save from/to clean hard disk and to copy to and from networks and removable media. You maybe lucky (for a while), but the chances of corruption of files and other unpleasantnesses are immensely greater when you use something else than the hard drive, and it is better safe than sorry.

  In addition to the (much longer) risk of file corruption, some issues are mentioned here:

  http://helpx.Adobe.com/Illustrator/KB/Illustrator-support-networks-removable-media.html

  To have a network really work requires little work.

  Make sure that you do not mix Mac and Windows on a network: you must use a Mac with Mac machines and a Windows Server with Windows machines.

  If you go through external means, it is always safer to zip/compress the file to avoid corruption.

• 80070643 error code when you use Windows update

  I am running Windows 7 Home Premium - 32-bit. I get the error code 80070643 when you use Windows update - it fails on the Office Live add-in 1.5. I uninstalled .net Framework and reinstalled. Office Source Engine turned on, started work. Any ideas how I can fix it. I am running Office 2010 beta as well.

  Assuming that Office 2007 or 2003 is also installed, uninstall try Office 2010 Beta and once again. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error codes when you use windows update 0 x 643

  Error codes when you use windows update

  Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

  Hey Joe,

  You can check if this article helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

• Unable to enter some charatcers, i.e. a, e, i, o, u, s but can eneter other i.e. h, w, q, etc. When you use the Windows product key update tool

  I am changing the product windows on a machine key recently image. To do this I use the Windows product key update tool. Usually, when I use the tool all right and there is no problem; However, in this case it I cannot enter certain keys as in a, e, i, o, u, s, etc.. I tried copy and pasting from Notepad and it sticks only certain letters like h and q.

  Someone at - it suggestions/ideas on how to solve this problem without having to re - install Windows?

  Sorry, we had used the wrong key for the version of the o/s.

• RDSH Lag when you browse the gateway SSL Secure-IT

  Hello

  I have a ticket open with support Dell/Quest, but thought I'd post here this ongoing problem where someone can help you.

  Question:

  I'm on version 8 vWorkspace and all servers are virtual Win2008R2 on ESXi 5.  When clients Web Connector (Windows or Mac) connects to RDSH gateway SSL Secure-IT, there is a noticeable lag when you type, hanging out windows, move the slider mouse around the start menu, etc.  All of our users to put to test is complained about this, because it affects their normal daily work.

  It is compared to customer standard RDP Windows, as well as bypassing the Secure-IT.  Bypassing the Secure-IT, the LAG disappeared completely.  The offset is also noticeable when comparing in the unique environment of LAN.

  EOP all off except for the extreme EOP EOP Flash and EOP printer.  I also tested with EOP all features are disabled, but it made no difference.

  All features of Windows disabled (smoothing of the fonts, background, etc.)

  My infrastructure:

  Internet (users)--> firewall SonicWall--> LAN (Secure-IT, Web - IT, connection broker, RDSH servers)

  The virtual machine of the LATTER was in the demilitarized zone, but to help out, I moved it inside the LAN which made no difference.

  The machine virtual Secure-IT has a lot of resources I can see that the CPU and the RAM hardly moved.  And I'm testing only with one or two connections in all cases.

  I tried to appoint the former Secure-IT version 7.5 executable, which further aggravates the offset.

  At this point, it is a show-stopper for us.  I hope that this can be resolved as vWorkspace is the best solution for us in terms of ease of use/connection for our non-techie users.

  Help!

  I discovered what the problem was.  I disabled the journaling on the IT security and the offset is now completely gone.  I found out about it on a post on the forum of Quest vWorkspace in 2010.  http://en.community.Dell.com/TechCenter/virtualization/vWorkspace/f/4827/t/19551509#1880

  So, I think Dell/Quest should document this, put in a basis of knowledge, or difficulty Secure-IT (pnsslsvc.exe) service, because it would help a lot of people.