Recent update caused the wireless card no longer works. After a restore of the internet system works.

Similar Questions

• Wireless card no longer works on Equium l20-197

  Hello

  Initially, I posted the problem I have on the US site, I didn't know that there was a site for europe.
  The long and short of it is my wireless card no longer works
  Here are the details on the hyperlink below and solutions of attempts, none works so far

  http://forums.Toshiba.com/T5/networking-Wi-Fi/wireless-problem/m-p/158046/highlight/false#M9476

  If someone can add something?

  Thanks in advance
  Kevin

  Hello

  According to the post in the US forum, the WLan card is not visible in the device under network adapters Manager. Right?
  You can see an unknown peripheral or Ethernet controller in Device Manager?

  If so, then check this Toshiba HowTo identify the unknown device:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78]

  If you don t have any unknown devices and if the WLan card still isn't in the list, then I guess the WiFi chip is defective.

  In this case I recommend using a solution just as the use of external USB WLAN.

• Satellite C660D - after update BIOS wireless card no longer works

  Hello
  Yesterday I Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have a working ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -J' tried a system restore, but he made a mistake and did not work

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2
  Windows 7 64 bit

  PS: Sorry if I don't speak very well, I'm not English.

  Hello

  This means the card WLAN is not listed in Device Manager?
  Some unknown device is listed in Device Manager?

  To be honest, this issue is not known to me but if it please try to set the BIOS to default settings and check again.
  I put t know if this will help but you can back up all your data and install again recovery image to check if the same problem persists with the factory settings.

• my wireless card no longer works...

  randomly using my computer my card wireless NETWORK has stopped working. I checked, and for some reason any the pilot only are there no more. tried to reinstall that driver for my realtek wireless card, still did not work. site HP Web to find what drivers I might miss even tried, and it came with nothing. I cannot turn it on anyway, can't find it anywhere except my device manager and, even then, it gives me no details on this at all. I don't know what else to try, or why she would randomly doing this. I scanned for virus, nothing came. and I made sure the NETWORK card has been activated in all ways I might be able to turn it on.

  Electrical components sometimes must have all the food sources removed and reintroduced to work properly.  Try to perform a hard reset first, if this does not work then we will move on to the next step.

  To perform a hard reset

  • Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
  • Unplug the adapter from the laptop.
  • Remove the battery from the bottom of the laptop.  There will be a switch/battery eject button.
  • Wait at least 1 minute with all sources of power disconnected.
  • Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

• Wireless card doesn't work after Windows Update

  I have a Compaq Presario F730US with Vista. I have installed Windows Mobile Device Center on it, and the computer has stopped recognizing wireless card. Then, after trying to restore the original drivers and do several other things, I have done restore the computer originally installed at the factory.  The wireless worked well.  However, as soon as I updated all Microsoft Updates and before installing Windows Mobile Device, the wireless card no longer works again.  I restored the drivers, and it worked the first time.  Then a few other updates came through, and I can't get working again.  Any suggestions?  It's a Broadcom Wireless card. I saw that a gentleman has been upgraded for its presario to Windows 7 and had the same problem on another post and never had resolution.

  The normal rule is to never accept update from Windows update device driver.

  Always bring the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  Change the Update Auto Update settings for ' check for updates but let me choose etc "> OK".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless connection no longer works after that the virus

  First a browser both stopped working for a month or two, and finally Internet worked from my laptop (although it worked all my other devices). Now after trying to fix my internet system works when it is plugged directly, but is no longer detects wireless connections, and the light doesn't light even when I switch 'on' the wireless switch. Help, please! Thank you!
  Mike

  It's a laptop?  With built in the wireless?   Assuming that so-

  Usually the unit must be included in the same device manager if there is a driver problem.   I suggest you check the BIOS.  The wireless is displayed there?  Turned on?
  I suggest that you update the chip set driver and also try to download and install the driver wireless from your computer manufacturer.   We'll see from there.

• Recent update causes my App crash. What should I do?

  Recent update causes my Adobe of Revel application crashing. What can I do?

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• I've recently updated to the latest version of the air and now itunes 'flashes' and I think that it corrupted an iPad?  Someone at - he seen this kind of behavior before?

  I've recently updated to the latest version of the air and now itunes 'flashes' and I think that it corrupted an iPad?  Someone at - he seen this kind of behavior before?

  When you have installed iTunes, and you download it from anywhere other than the Apple servers. There is a new version of the 12.3.2.35 installer that came out some time around 23/24, which can solve the problem for you. Download and install on your existing copy.

  TT2

• Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.

  Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.   Anyone know if it's related to Adobe or Outlook?  I am able to send emails on Outlook.

  Thank you

  Hi lorid74531323,

  Latest version of MS office will not work with your Acrobat 9.

  May be a compatibility issue, please check the web browsers and applications of PDFMaker

  Kind regards
  Nicos

• Keyboard and wireless mouse no longer works

  my keyboard is msi star type ES500W. Computer... top of wind msi ZE2010. After changing the batteries in the keyboard and mouse wireless, they no longer work. The computer says that they are beautiful, but they don't work! I'm not computer savy so please talk to me as tho I'm in kindergarten. Thank you

  Hi Louise,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  3. what version of Windows are you using?

  Perform the following methods and check if it helps.

  Method 1:

  Try to connect the keyboard and mouse to any other computer / or any other port and check if it works very well.

  Method 2:

  You can try to run the hardware troubleshooter and check if it helps.

  Convenience hardware store

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  You can also try to update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 4:

  You can also try to synchronize the device with the receiver again. Then try to reinsert the batteries. Also, look for the interference of signal from nearby electronic devices.

  Hope this information is useful.

• Satellite 2410-404: mini pc card no longer works

  Hello

  I have a Satellite 2410-404 with mini pc installed wireless lan card, allowing to work perfectly - up to a few days ago, I installed a pcmcia by levelone wireless network card, just to check if it worked. This was the case, and so I uninstalled the card and the software that came with it. But now my toshiba mini wlan card no longer works! It is actually recognized and installed by the system and shown as being active - but I do not get a connection to wifi even when there is certainly one around. I can't even bring up the list of WLAN networks available (win xp) that normally you can even if there's no matter what available wlan.

  I checked the registry and found several remaining entries by levelone... but dare not change or delete since I'm not an expert at all regarding registry stuff. Another thing that bothers me is that when I uninstall the mini pc card and let windows reinstall, it shows as "3 wireless" or even "WiFi 4", which seems to allude to some "connection 2" still occupied by some zombie levelone wireless.

  I would appreciate any help on this matter,

  TIA
  Rainer

  Hi Rainer

  As you can see all the software, after removing, let a few entries in the registry. In my opinion, you should remove the list of Device Manager wireless card and wireless connections. Restart the device and the wireless card should be recognized and installed again.

  The wireless connection you can configure with option of windows. If you use another client to the wireless Wi - Fi disable windows configuration.

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A210-1AP - video card no longer works play Call Of Duty 4

  Hello

  I have problems with my video card.
  When I was playing call of duty 4 5 minutes from my video card stops work and the restart of the screen.

  Then he said: your video card no longer works and the problem solved.
  My graphics card is ATI Mobility Radeon HD 2600.

  > Then he said: your video card no longer works and the problem solved.
  And? It works now?

  Eventually the driver graphic hanging and that's why you have received this message.
  It is also possible that the temperature of the GPU was too high and therefore the message appeared.
  The COC 4 needs a lot of material resources and everything should run with maximum performance! Therefore, there are more high heat dissipation and this can lead to problems of graphics card.

• Microsoft wireless mouse no longer works on Inspiron 8200

  Our Microsoft Wireless mouse no longer works on our Inspiron 8200. We have a red light on the mouse so it's on and we just changed the battery in the mouse. The computer no longer recognizes the mouse. Before his stoppage of work completely computer did not come out of standby/hibernation mode correctly. He had to press the power button rather than wake up it with the mouse.

  Now that I have attached a wired mouse, he wakes up as it should with the movement of the mouse or a key.

  Do you by chance have a solution that I can download?

  Thank you.

  SheilaMc

  
  

• HP SLate 6 Voicetab: how to close the update of the Android system?

  Hello

  I don't want to install the updates to the Android system. Because the unit will issue.

  For this reason, I have sent in for service. Now, I don't want to install this update problem in the good work unit.

  How can I disable the Android updates. How to remove the notification area.

  Thank you

  HP Slate6 voicetab

  4.4.2 Android

  Update name: System essential updatetes for google android 1.01.07

  Hi there @ESAGLAM
  
  Welcome to the Forums of HP Support! I understand that you don't want to install an Android update and want to disable the notification. I'm happy to help you with this.

  First of all, you are not obliged to carry out an update of the system. It's up to you to install an update or not.

  One suggestion that has been put forward is to maintain the Notification in your notification window. Then select App Info. From there, you can disable the application. It is often only a temporary solution, because it is a core service of Google app can reactivate itself.

  Google did not include the option to disable the notifications of system update. Often, the only way to do so is by rooting the device or third-party apps. It's something that I can't recommend for several reasons. I refer you to this post in the forum by @SiobhanF with a very useful contribution by @WyreNut rooting.

  Other useful pages, I found related to notifications and automatic updates:

  How to disable the Notifications of App in Android - howtogeek.com

  How to disable the application updates automatic in Android - howtogeek.com

  I hope that this help and if it can help with your problem, please mark this message as a solution.