Recent update I've done to my computer. September 24, 2010

Similar Questions

• Are there any recent "updates" which could slow down my computer?

  I had my system set up so that I would be informed of updates then I would elect to install those that I wanted too. Somehow this setting has been changed to automatically download and install updates. In recent weeks, I noticed that my computer has slowed down considerably.

  I have a Sony Vaio, I bought October 2012. I don't keep a lot of photos or videos on my hard but drive transfer them to an external hard drive that is not connected to my laptop unless I use as external hard drive at this time so I don't know has nothing to do with the cause of my laptop is running slowly. My operating system is Windows 7. The version that is installed on my computer but I don't know how to check the version. I don't know what other information, you may need, but can tell you that I don't download a lot of things like my children and grandchildren do my hard drive is not all clogged with junk.

  If you need more info about my system and can tell me how I would like to know what you need to know that I will be happy to provide this information in order to help find the reason of my system is so slow now.

  Thanks in advance for any help I can get.

  Linda

  Hi Linda,.

  Updates are additions to software that can help to prevent or fix problems, enhance the operation of your computer, or improve your computing experience. Important updates provide significant benefits, such as improved security and reliability.

  Windows operating system am I running? Updates to Windows Installer in Windows 7

  I suggest to run the Troubleshooter of Performance and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  You can check the links for more information on the updates of Windows and performance.

  Optimize Windows 7 for better performance

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Updates: frequently asked questions

  It will be useful.

• A recent update of Yosemite caused serious conflicts with my computer. Apple has decided to re - install the original Yosemite and update. PEO

  A recent update of Yosemite caused serious conflicts with my computer. Apple has decided to re - install the original Yosemite and update. This has been successfully done, now, I have to re - install any third part software, but Adobe system is

  Connect to your paid account of Cloud to install the cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• My iPhone does not appear more than 6 iso 10 under software updates. I don't have a computer with iTunes. What should I do?

  MY Plus 6 iPhone does not show the new 10 software iOS to the title of the software update. I don't have a computer to iTunes. What should I do?

  Try leaving it plugged in the power of the day after. The servers are probably very overloaded. I have not being updated myself but will be soon.

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• Computer Touchsmart 520: touchsmart 520 pc restarts after the recent update

  After a recent update to the stop, when I restart my computer, it crashes on the initial screen of blue with the hp logo. I hit the button esc several times to enter setup and nothing happens. What can I do to possibly enter safe mode and restore my system to the way it was before the recent update?

  Hi there @kencl65,

  That the Forums are with you!  I understand that you are unable to start your system correctly after a recent Windows Update.  I'm happy to give you a helping hand with this.

  Please see this document which has a process, you can follow this s cover the situation of departure and suspended at the HP Logo: HP - computer desktop PC won't start not (Windows 10.8), as well as covers of system restore and recovery.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• After the recent update of Win7, computer will not remain in hibernation

  After a recent update of Windows (probably to fix something else), my computer refused to stay in hibernation.
  This is a 64 bit machine running Win7 Pro, and he wakes up now randomly after going into hibernation.
  I tried using 'powercfg' to see what is wake it up - no result.
  I tried to use 'powercfg' to deny the mouse and network which apparently have permission to wake up-no result.
  I unplugged the mouse in case there is a vibration of the earthquakes to chance - no result
  I unplugged the cable to the router in case there is a stray signal from on the internet - no result
  I went into the "Network properties" window and turned off all the "wake up" properties - no result.
  I looked at similar questions on this forum and checked "of performance issues" in the Panel as not advised - no problems to report.

  OK - what makes the Microsoft with a recent update to cause this problem and when they're going to cancel it?

  Hello

  Try the following and see if it helps.

  Method 1:

  I suggest you to check the update history to discover the updates installed by following the link:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  
  Method 2:

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  Method 3:

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Reference: (why doesn't my computer go to standby or hibernate as expected, or why it suddenly wake?) from the following link.
  Sleep and extended: frequently asked questions: http://windows.microsoft.com/is-IS/windows7/Sleep-and-hibernation-frequently-asked-questions

  How to disable and re-enable hibernation on a computer that is running Windows: http://support.microsoft.com/kb/920730

  Note: If you still have the problem then I suggest you to perform a system restore to a point when the computer was working fine.

  System Restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

• My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but every time I open a fil

  My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?

  Hello

  Acrobat 7 is not supported and an older version of Acrobat.

  Also, it is not compatible with Windows 7.

  This could be the reason why you are faced with it.

  Please see this link.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Sukrit diallo

• My PC has been recently updated Windows 10.  Adobe has informed me that my PSE 9.03 updates are ready.  Tried three times to download but each time download was not successful-"try again later".  So what don't understand me?

  My PC has been recently updated Windows 10.  Adobe has informed me that my PSE 9.03 updates are ready.  Tried three times to download but each time download was not successful-"try again later".  So what don't understand me?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• After that the recent update the icons on top of the desktop computer are missing along with the programs that are associated with

  After the recent updates KB890838, KB2515325, KB2522422, KB982018, KB2506928 at the top of the page on my desktop icons are missing. I tried to find the trash and evently it has been deleted. I can restore to before the update and it is corrected. How can I find and fix this problem?

  AlfredPhilbrick,

  See the following topics

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >

  05/03 / 1109:41: 52 am

• Capacity lost to bookmark pages after recent updates

  Firefox has been working great until recent updates of the version 39.

  I have now lost my ability to bookmark a page. When I click on the star icon as I always got it, the Star turns bright blue and gives the appearance that the bookmark is transferred - or "thrown in"-the bookmark icon. But page never appears anywhere in my favorites.

  Before when I clicked on the star, I've always had a box that would allow me to change the name I wanted the bookmark for the name of the bookmark and the Bookmark menu different locations I could choose as to where I wanted to go. Now I don't get any box.

  I know this must be a consequence of the recent update changes and not something in my computer because I have never had this simulation to "launch" the bookmark before. Or the brilliant blue star.

  OK, try clicking on default settings, as shown - controls customize Firefox, buttons, and toolbars.

  If it doesn't it try Mode without failure of Firefox to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  If still no joy, try refresh (called "Reset" in older versions of Firefox) which can resolve many issues by restoring Firefox as his default from factory and save your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

  and select troubleshooting information. Should open a new tab containing your troubleshooting information.

• If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
• At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
• Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
• Click Finish and reopen Firefox.

This corrects the problem? Please report to us!

Thank you.

• confused about the want 700-074 update bios - it's for my computer?

  Hi all

  I am a happy owner of a 700-074 HP Envy computer. I have a question about a recent update BIOS I've seen on the software and drivers download page on the main site HP.COM. I frequently check the site for updates of drivers and software.

  The update in question is classified

  Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  Although the ROMA family corresponds to the family on my computer, it lists the update of a HP Compaq computer.

  This BIOS does the 700-074 want system specifically? I guess it's because it it lists to the title of the download page for 700-074 want systems. However, I don't want to patch my BIOS with the update incorrect if it is considered an error.

  Any help will be appreciated.  Thank you!

  Hello @boinc127,

  I understand that you are looking to confirm that the update of the BIOS HP Compaq consumer Desktop PC BIOS Update (2AF3 ROM family SSID) is appropriate for your computer. As far as I can tell it's the update of the correct BIOS for your computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• My friend recently updated one of my old computers from Windows XP to Windows 7, but I want to go back to Windows XP. How can I do this?

  original title: restore Win Xp

  Hi, my friend has recently updated my old system of windows xp with windows 7. Now, is there a way I can restore my computer to the back? I do not have the installation diskettes, but I don't have the option when I boot into xp or Windows 7 recovery console. Is there a way I can make my xp using this? I currently have the windows.old folder, as well on the hard drive of the computer and a removable. Perhaps, uninstall Windows 7 completely and put the windows.old folder in her place? Greatly appreciated!

  Hello

  · What is the number and the model of the computer?

  You can follow the procedure from the following link: how to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder: http://support.microsoft.com/kb/971760

• Recent update has messed up the boot process.

  After the recent update of the operating system does not start just sits at the black screen & flashing underscore. 5 minutes later it asks me to press one of the buttons f 2 again or go to the configuration. How to stop this? don't know if the system won't let me delete all the updates I did that day.

  Hello JGBrock,

  Thanks for your post.  Try to start in Safe Mode with network.  Once started, go to the website of the manufacturer of your system and download / install the latest video driver for your computer.  Please let us know if it did or did not help to solve the problem.

  See you soon

• Recent update has changed my screen resolution?

  Recent update of windows changed my screen resolution. Blow up all my icons, wallpaper and extends the size of windows. Pages do not correspond to windows, the computer and on the web. It is the second time that this happens, and I don't know how I straightened the last time. I know this isn't a major problem, it's just frustrating, as it has a mind of its own.
  Any ideas would be greatly appreciated.

  Change your update settings and do not install the the hardware driver updates left 3rd of Microsoft Updates. Find them in the constructor.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner