Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

Similar Questions

• I just bought a new laptop with windows 7 and there is no Chess Titans in games. I would have never bought it if I knew that. Is it possible I can get it?

  I just bought a new laptop with windows 7 and there is no Chess Titans in games. I would have never bought it if I knew that. Is it possible I can get it?

  When you check the list of Windows features it is not inside?

  To get there, press the windows key and type in "features " without the quotes and then click on "turn on or off windows features ". "" In the window that appears, you should games and next to it a button "+". Go ahead and click the button "+". You should see Chess titans here. If it is unchecked then go ahead and check it and click OK when you are finished. It should appear in the Games folder in the start menu and Explorer games now. You can or you have to may not restart. It should tell you if it is necessary, however.

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• Unable to play NFS MW as a file speed.exe has stopped working.

  Original title: the program compatibility

  Hello

  Here, I installed a program called NFS MW but when I used to open this program it shows "speed.exe has stopped working".

  Hi Slim,

  There could be a chance that there is a file system corruption. So, I suggest you to run SFC scan and check if it helps you to repair the file system corruption, if there.

  The file system check is a utility built into the operating system that will check for the corruption of system files. The sfc/scannow command. (System File Check) analyzes the integrity of all protected operating system files and replaces incorrect versions, damaged, altered, or damaged with correct versions where possible.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8.

  1. press the Windows key and X at the same time.

  2. choose (Admin) command line in the shortcut menu.

  3. in the command prompt, type sfc/scannow and press ENTER.

  4. exit the command prompt.

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Keep us.

  Kind regards

• I'm putting a game on my computer and repeat me setup.exe has stopped working

  I'm loading Jewel quest games on my computer.  Whenever I start a window appears which says setup.exe has stopped working - please help if anyone has any ideas to try

  Hi shellyart,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  ·         What version of Jewel Quest you trying to install?

  Follow these methods.

  Method 1: Run the game as administrator.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

  Method 2: You can also try the game in compatibility mode and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  For reference:

  Quest http://www.Microsoft.com/Windows/Compatibility/Windows-Vista/Search.aspx?type=Software&s=Jewel

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-mark-an-application-to-always-require-a-full-administrator-access-token-user-account-control

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Whenever I open my computer I get this message: "explorer.exe has stopped working".

  original title: explorer.exe has stopped working

  whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

  Hello

  The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Receiver error message: "systemprotector.exe has stopped working" whenever my computer starts.

  Original title: "systemprotector.exe has stopped working".

  I am on Windows 7 and I get this error systemprotector.exe ceased to function in a pop-up box every time my computer starts up.
  Whatever why is show, and how to fix it?

  Thank you.

  Hi Zachjd,

  Thank you for the question!

  It would be useful that you could answer this question to help you further.

  Have you done a recent software or hardware changes to the system?

  Systemprotector.exe seems to be an associated process of Advanced System Optimizer. If you have installed any Advanced System Optimizer, you can try to uninstall and reinstall the same and check if it helps.

  Uninstall or change a program

  Install a program

  If you need further assistance, please answer and we will be happy to help you.

• Programs to get forcefully liquidated with user input, on HL2 I get the message: HL2.exe has stopped working.

  Original title: programs get forcefully closed with user entries

  It becomes a common problem. I play the game of Garrys Mod, when its about done with 'send customer... '. "or other words, by sending the list of add-ins to the server, it fogs upward and then an error pops up saying"HL2.exe off work"of such and such, its normal for the program to do and this happens more often and moments later, he continues with normal function, but this time, windows does not allow it.

  Hello
   
   
  1. have you made changes on the computer recently?
  2 is this number reserved only for this game or any other games and programs too?
  Method 1.
  Many users have solved this problem by disabling the DEP (Data Execution Prevention).
  See the Disable DEP for an individual program section in the article below to disable the DEP for this game.
  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings
   
  Method 2.
  It is a possibility that a third-party application is causing the conflict. Let us try to play the game in the State of clean boot and check if it works very well.
  See the article below for more information and measures.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I restart my computer, I get the following message: PrinterSelect.exe has stopped working. Windows can check online for a solution to the problem.

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: printerselect.exe
  Signature of the problem 02: 1.0.2453.22313
  Signature of the problem 03: 450fe152
  Signature of the problem 04: mscorlib
  Signature of the problem 05: 2.0.0.0
  Signature of the 06 problem: 4a7cd8f7
  Signature of the problem 07: e4
  Signature of the 08:10 problem
  Signature of the problem 09: System.Security.Security
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message.  Any help would be appreciated.

  Hi dtwes,

  try to stop the program from running at startup:

  Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
  deselect 'printerselect.exe '.

  I hope this helps.

• Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

  I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

  bredenbm,

  We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

  First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers.

  All other drivers

  Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

  In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

• We recently bought a new computer with windows 8, and now we get so many pop ups that you can hardly even search the web. How we solve this problem? Thanks, Fra

  need to get rid of these pop ups!

  Make a check of malware with several malware scanning of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I am tring to install the Manager of multichannel sound, which is on XP Home, in a laptop with windows Vista. and can't seem to make it work. Can anyone help?

  Manager of multichannel sound from / to windows XP Home Edition. Installed on Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above fix, try the Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner