Recently, my laptop was hacked despite the defender of the window and the firewall running. After the accident, I have WINDOWS DEFENDER IS SETTING SWITCHED ON

Similar Questions

• I registerd XI version installed on my work computer. I also want to install it on my laptop as well.  The version I have was an update of the 9 standard.  How can I do this?

  I registered XI standard version installed on my work computer. I also want to install it on my laptop as well.  The version I have was an update of the 9 standard.  How can I do this?

  Give your old serial number setup when asked for a product calling

• My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  You can also see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• Hello, I would like to connect my behance account to a new email address (because I was hacked on the former) how can I do? Please, I beg you.

  Hello, I would like to connect my behance account to a new email address (because I was hacked on the former) so obviously I have more access to it. but I don't want to lose my account. How can I do? Please, I beg you.

  You can contact Adobe support for the resolution of https://helpx.adobe.com/contact.html

  I also understand that there is an obligation to communicate with the support of behance too.

  Concerning

  Stéphane

• Updated to Win10, now the ch & Lr have error 0xc0000007b. Set display to date, no change driver. Run as admin, no change.

  Updated to Win10, now the ch & Lr have error 0xc0000007b. Set display to date, no change driver. Run as admin, no change.

  Hi Michael,

  Please, download the file vcredist_x64.exe for Microsoft Visual C++ Redistributable 2012 4 update this link and share the result:

  https://www.Microsoft.com/en-AU/download/confirmation.aspx?ID=30679

  Kind regards

  Claes

• My laptop was connected to the internet before, but now when I want to connect I get this message "application Profile problem!

  Problem to apply the profile! "How to fix

  Hi, my laptop is connected to the internet before, but now when I want to connect I get this message "Application Profile problem!" how to solve this problem.

  I search in Google allot, but I a not end an answer to solve my problems. Can someone help me?

  Thank you.

  Hello

  ·         Using internet connection wired or wireless?

  Follow these steps:

  Step 1:

  Updated driver for your network card to the last. Also updated the firmware on the router as well. Follow the steps in troubleshooting section and check if that helps:

   

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Step 2:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  This behavior is generated by the Manager of Intel wireless cards. This feeder is usually loaded with the Intel Wireless card drivers. If that's the problem, you can try Intel support and check.

• I have dv4 1240 TX. my laptop was made mute. the sound is not coming.

  the sound in my laptop is not.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Lightroom CC running slow after recent update. [was: most of the time it's very slow]

  After that the 2015 update is very slow to 90% of the time

  Hi raleighg,

  Suggest you follow the steps below:

  1. go in the Lightroom preferences > General > uncheck "Show Add Photos Screen.

  2 preferences > Performance > uncheck "use the graphics processor.

  3 restart Lightroom, and check again.

• 12 elements will not reinstall. error message 2343 specific path empty. Clean computer after the accident. Have serial No. Help! Please, I beg you.

  I'm trying to reinstall 12 elements. I had to clean my computer after a crash.

  This is a saved copy and I have the serial number.

  I downloaded the 2 files by following the instructions but cannot install.

  I get the error message is Error 2343 "specific path empty.

  I had previously uninstalled all Adobe files on the computer.

  Can someone help me please, I'm desperate,

  Thank you, Geoff

  In this case, you can try manually deleting registry keys.

  Well Yes, since the date or purchase, you may return the product within 30 days, I guess. You can go ahead and buy the upgrade 14 items. Same Support from Adobe can help you with the installation process, they can access remotely your comp and install the application for you.

  Please refer below link;

  Return, cancel or change an Adobe order

• Computer laptop will not appear the screen...!

  Hi all technicians,

  My Inspiron 1720 laptop recently stopped to show the screen... When I start the laptop I do not know what happenning, if it's boot or not... the only thing I see that the power led lights up the HDD led flashes and then nothing happens (i.e. no drive activity HARD even when I press any key)... the only option I have is to turn it off in now the power button for 8 sec.

  Before that my laptop was working fine just when I accidentally pressed and the screen has gone... so I closed the laptop by pressing the power button for 8 sec... now its in the condition as described above... pls reply as soon as possible.

  Kind regards

  Hotmins.

  Inspiron 1720,

  Core2Duo, [email protected]

  Vista Home Pre,

  2 GB OF RAM,

  nVidia 8600M graphics card.

  
  

• Laptop has frozen on the download of the Update step 3 of 3, but never goes beyond 0%

  Original title: download freezes

  My laptop has frozen on the installation of your last update - when you switch on it says download stage 3 of 3, but never moves beyond 0%.  I tried your advice on restarting in safe mode but still the same thing, then toggle, light up again and continues in a loop!

  Hi NathanielPortland,

  Method 1:

  You can read the following article and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Method 2: When you're able to start normally, check the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Method 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Cannot download eBooks after upgrade of PC.  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download a

  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download an eBook, I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12".  Uninstall ADE (three versions), as well as cleaning the registry does not clear the error.  And I can't cancel and reauthorize my new laptop as to authorize is greyed out.  Anyone else having this problem?

  Problem solved finally.  Used regedit.

  https://helpx.Adobe.com/Digital-Editions/KB/error-e_act_not_ready.html

• FixIt seen problems with the computer name NOT MINE I was HACKED?

  Virus or hacked? Correct name of the specified computer withSTRANGE name of the computer.  Appaarently MY computer has been HACKED and the hacker has INSERTED his name.  How can I get rid of him.  I clicked on DELETEi FIXIT page, but it has not REMOVED.  I had several problems which ddealt FIXIT with, IGNORING MY real computer name.  What now?

  Topics of interest:

  1. http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/how-can-i-tell-if-my-computer-has-been-hacked/0d326395-475f-44eb-b2e6-600d317ae046

  2. http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/my-computer-was-hacked-is-it-safe-for-financial/42cbe324-8810-447b-ae94-b6051ca124c1

  This 'as new' suppposedly RE - furbshided Windows XP computer arrived with ZERO discs of any kind.

  I want a disc of resettlement to the cables and reinstall contant of original file (1) in order to completely destroy the Virus or whatever that changed he clock time, destroyed almost all files including banking information and keeps of worry a "key logger" had attached to it, I refuse now the info online purchase of ot entry that severely limits the use online. Start-up and GAMES sections is empty, as are too many to count other important files and the phoos.  Section of games and start are also missssssing. I just loved currently off FREECELL game.

  My Windows Defender - becme corruptf, McAfee destroyed files and now FIxIT Center responds wihtERROR. ANF Microsot Essentials never reported any viral activity as it did on my other Dell computer (shown as Trojan - whichreportedly has been FIXED.)  But there webpage adverse change "/ / / home.mywebsearch.com ' an entry NOT made by me.  I am the only user of my two machines.

  You will need to get information from the company / the person who sold you the computer "re-burbished" on how to reinstall the operating system. The computer may have a hidden partition, or you may be able to get drives.

• I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen

  I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen randomly with the screen turned on (I mean everything is black and I can't see a thing, but can still see the light of the LCD screen). This often happens when I open/close a window, browsers web example, the records, or even during the boot. I want to know how to solve this problem and if the upgrade to Windows 10 works for her.

  Hi Haolin,

  Thanks for posting your query in Microsoft Community.

  I do not understand that the screen goes black randomly, and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time it worked?

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Step 1: Reinstall your video driver

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click file, and then click new task (run).

  4. In the text box open, type explorer.exe, and then click OK.

  5. Click on the Start button , go into the Device Manager in the start search box, and then, in the search results, click on the peripheral Manager.

  6. Double-click on display the cards, right click the display device, click Update driver software, and then follow the steps in the wizard that appears. You can also visit the website of the manufacturer of the computer support and install the latest available graphics cards for the same model of computer you have.

  Note: After the driver is re-installed, you may need to restart your computer to complete the installation. You may also need to adjust the resolution of the display to its previous value. For more information, see change your screen resolution.

  Step 2: Search for registry problems

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click fileand then click new task (run)

     In the text box open, type explorer.exe, and then click OK.

  4. Click on the Start button , type regedit in the search box, and then, in the search results, click on regedit.exe.

  5. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  6. Click to select the WinLogon key and then in the right pane, click on Shell. The value of shell in the data column must be explorer.exe. If the value of Shell is not explorer.exe, double-click Shell, and then, in the value data text box, type explorer.exe, and then click OK.

  7. Close the registry editor and restart your PC.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  If this procedure resolves the issue, you are finished. If this is not the case, proceed to the next set of steps.

  Step 3: Start the computer in safe mode and run system restore

  1. Click on the Start button , click the arrow next to Shut Down, and then click restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. In the Advanced Boot Options screen, use the arrow keys to select Safe Mode, and then press enter.

  4. Log your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  5. Click on the Start button , type "System Restore" in the search box, click System Restore, and then click Next. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. Choose a restore point when your PC worked as expected, click Next, and then click Finish.

  7. Restart your computer normally.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  If these steps resolve the issue, you are finished. If not, try to repeat the steps and chooses an older restore point (if available). If that does not resolve the problem, contact your computer manufacturer or the technical support for further assistance.