Recently upgraded memory, not in use

Similar Questions

• I downloaded the trial version of ambient light recently and have not yet used.  It seems that someone in Uruguay has hacked my email account.  Can someone give me advice on how to handle this?  I have no intention of submitting a credit cardnum

  I recently downloaded the trial version of ambient light.  I have not yet used.  There is no eveidence that someone hacked into my email account.  I was intending to buy Hall of light at the end of the trial period, but have no intention to submit my credit card information until it is resolved.  I appreciate all the advice on how to handle this and secure the information I have.  Thank you.

  Start buying, security of your email account. After that when you go to buy the LR or the photographers subscription plan, you will be on the secure site of Adobe and has nothing to do with your e-mail account that is currently being hacked.

• Upgrade memory not accepted by Satellite C660

  I installed a 4 GB ram module to upgrade this Satellite C660d C66 (PSC1LE).

  When I then try to start the system all that happens is that a flashing cursor appears in the upper left corner of the screen. The configuration system is 4 GB installed. If I put the original memory in the laptop then everything works ok.
  I contacted the supplier of the ram module and they sent me a replacement, but exactly the same problem occurred.

  Any notice received with gratitude.

  There must be a compatibility problem. What new RAM use? What brand?

  RAM upgrade I recommend you to use only high quality modules. The best quality offers Kngston.

  Toshiba recommends using 4 GB of RAM with PA3918U-1M4G part number.

• upgrade memory - not recognized by vm

  I have a virtual Red Hat machine that had 3 GB of memory. I stopped, upgraded the memory to 4 GB. After I have reboot and run a free - m, he sees more than 3 GB. Is there anything else I need to do?

  Thank you

  Scott

  You need to use a PAE kernel. Use your up2date or else find and install.

• upgrade memory not recognized

  I have a pavilion dv6405ca that came with 2 512 memory sticks. I replaced them with 2 1gig sticks and all thing as before, but the computer works is still only 1 ram total concert. The bios won't let me change anything, but the date and time and memory remapping is not on the menu.  the operating system is vista Home premium.

  Oh... I have flashed the bios to f.42 f.43. no problems, but the machine is still unaware of the increased ram.

  RESOLVED the 2nd slot was not properly seated new stick. The old man sat down with a problem, but the new ram RAM has not quite contact (about 8 times in a row!). I finally noticed and made a misguided pushing and he sat and I have my complete 2gig. Thank you for you time and effort.

• Upgrade memory on Satellite Pro A60

  I upgraded a Pro A60 with a memory of 1 GB upwards but the general tab panel /System/ watch still have 192 MB of RAM. This limits me downloading some software of safety of BT Yahoo.

  Someone can advise on how I can make the machine to recognize the new RAM or is the 192 MB RAM memory different the new upgrade memory note?

  If you use the incompatible RAM module, it is logical that system cannot recognize it properly. I don't know who is the manufacturer of this RAM 1 GB module, but if you want to use a consistent pick up some info on 1024Mo PC2700 (PA3313U-1M1G) or check web page of Kingston.

• Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?

  Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?

  Double click on the sequence imported into the location of the project.

• How to install a foxit button in my toolbar? I've recently upgraded to the latest version, but my toolbar does not contain a firefox button that is necessary for certain tasks, such as the private browsing.

  I had an existing laters 3 point what Firefox and recently upgraded version upgraded to Firefox 10. This new version has still the old toolbar at the top, but there is no button "Firefox" that one has to use to activate certain actions such as "private browsing". Is there anyway I can install the button in the toolbar, or is it possible to change to the new interface of version 10 which includes the Firefox Button. I prefer the old (the old configuration with the toolbar on top, but if that can't do, how to migrate to the new configuration that apparently puts the tools on the side, if I'm not mistaken.
  Thanks for any help you can provide. I have Windows XP.

  If you have the toolbar to the former, you can always go to private browsing by clicking on tools, then on 'Start private browsing'. All located in the Firefox button options in the old-style toolbar, just maybe a little more hidden.

  To activate you button Firefox, go to view, then toolbars, then uncheck "menu bar". You should have the Firefox button.

• Satellite M40-276 - memory not detected in the Bios upgrade

  Hi people!

  New kid on the block!

  I have a client with a toshiba Satellite m40-276. I've updated his memory to give it a little more to play with...

  Went into the bios to see if everything was OK but no projected additional memory. I removed the new and old memory and put in the new 1 GB module and restart the computer.
  The bios has not yet changed the size of the old memory?

  Went to windows and of course that the memory has been detected it normally?
  I added the other memory module and went into the bios again, but no change it?

  Windows, however, recognized that the two modules?

  His computer is the same bios to factory and has never been updated.

  My questions are... why the bios doesn't recognize the upgrade memory? It will help in upgrading the bios?

  Enjoy all the suggestions I can get on this issue.

  Thank you

  bookie56

  Generally, if you upgrade RAM using tested compatible modules, that should be recognized correctly.
  We do not know what modules you use, and I guess that there is a compatibility issue.

  RAM on Satellite M40 276 can scale up to 2 GB of RAM and compatible modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Devices not recognized when connected to itunes from a PC. Recently upgraded to windows 10 and appears there is no driver

  I'm sure that this request has jumped several times. I've recently upgraded hardware and software being windows 10. All devices being Ipads, Ipods and Iphones are not recognized in iTunes once connected to your PC. The PC is to recognize that a device has been plugged in with the usual beeps. I've seen drivers and it seems that usb iTunes etc is not listed. How this can be fixed. Thank you inadvance for advice

  Hello, Aubin Grove,.

  Thank you for using communities Support from Apple!

  I understand that your iOS devices are not recognized by iTunes when you plug it into your computer. There may be two different causes for this type of situation, but we have some great troubleshooting to help you resolve this situation.

  To begin the process of diagnosis, I would suggest reading over and working through the information mentioned in the following article.

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  See you soon!

• How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  The following versions of Microsoft Outlook are fully supported on Windows 7;

  • Outlook 2003
  • Outlook 2007
  • Outlook 2010 (when it came out)

  It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.

  Previous versions
  Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;

  • Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
  • Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.

  The info source:
  http://www.MSOutlook.info/question/303

  t-4-2

• Dell Precision M90 recently upgraded to x 64 Win7 can not get correct graphics, stuck with the Standard VGA Graphics Adapter Card

  I have a Dell Precision M90 laptop and recently upgraded to Vista 32 bit to 64 bit Windows 7.  Everything worked perfectly, except for my display drivers.  Windows 7 installed a driver called Standard VGA Graphics Adapter.  This driver has a very low resolutions only and cannot deal with games or same Aero.

  I had an experience with updated video drivers with Vista.  My graphics card is a NVIDIA Quadro FX 2500 M.  When I had Vista there is no Vista compatible driver for this card, so I used the Geforce 7900GTX driver (which is inspired by the FX 2500 M) and it worked fine.  Of course, the Quadro FX 2500 M doesn't have a driver compatible windows 7.

  I downloaded the driver for the 64 - bit Windows 7 Geforce 7 series so I could upgrade and use, however when I used the NVIDIA installer it says that my computer has no compatible hardware for this driver (I tried to install it in Vista compatibility as well).  I tried to force the upgrade by using the option "have disk" and choosing the .inf directly file.  This did not always and said that he could not work because "the selected driver for this device does not support this version of Windows" even if it is the version of Windows 7.

  I also tried to start my computer in safe mode, uninstall the VGA Standard driver and then install the driver NVIDIA, but it does not work either.

  Sorry for the long post, I just wanted to add as much information as possible I hope to solve this problem.  Thank you for taking a look and thanks for your suggestions!

  Fixed!  Finally!  Dell.com took the pilot... but the link that they had posted on the page of Precision M90 was mislabeled.  I tried another way, found the good pilot, and got, it works.  Solved the days and days of frusturation.

• I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  VLC will play them?

  http://www.videolan.org/

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v

• Qosmio G20-118: upgrade memory to 2 GB using the Kingston

  Can the expert no longer please tell me if this specification upgrade memory fits on the Qosmio G20 - 118?

  Kingston memory for dual channel DDR II of motherboards. This package have 2 x DDR2 1024 MB 533 MHz CL4.

  Thank you

  Don t know your detailed specifications module, but you must use the DDR2 533 MHz PC2-4200 memory.

  The module should looks like this:
  Module memory for Qosmio G20-118