recharge the IPod Shuffle, the IPod Shuffle must be activated?
Recharge the IPod Shuffle, the IPod Shuffle must be activated?
The power switch on the shuffle can be either on or OFF position when the load. I usually leave in the on position all the time, so that I don't need to deal with the little switch and also to avoid wear it. When disconnected, the shuffle switch mode 'sleep' when it is idle (songs plays do not).
Tags: iPod
Similar Questions
-
I have a working iPhone which is implemented through iMessage auto before SMS to my personal iPhone. If my work phone is not activated SMS messages don't not autoforward. Must the phone working be enabled so that SMS autoforward work?
Yes, in any kind of call or the transfer of text, each device in the relay channel must be turned on and connected to the network.
-
What is the right way to recharge the iphone 6
What is the right way to recharge the iphone 6?
Hello
Follow the instructions here to recharge your iPhone:
-
I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do
Have you tried to reset it in security issues? If you are not able to do so, contact Apple support so a security identifier Apple Advisor can help you. 800-275-2273.
-
iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone. Male/female connection not relieve tight. Advice\help would be appreciated.
Try a different cable - preferably a certified one MFI
If this does not work
Please take a genius appointment at an Apple Store, or select another authorized service provider.
-
How to recharge the remote control for Apple TV 4
How to recharge the remote control for Apple TV 4
Recharge your Siri or Apple TV Remote - Support Apple Remote
-
I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?
This connectivity is not supported (except to attach them). What you trying to do?
Barry
-
After sleep, the photo library must be repaired
I often sleep my iMac (El Capitan 10.11.2) and find in the morning that there is a window telling me that the photo library must be repaired, and I can fix it or quit. I chose the option "fix" several times, but that makes no difference. I talked to Apple support about this and was taken by the standard routine, but that changed nothing. Everyone comes through this?
Hi rowlandfromromsey,
Thank you for contributing to the communities of Apple Support.
If you find that you need to repair your photo library after waking up from his sleep, there are a few steps that I would recommend who can help you find the cause of this behavior.
First, create a new library and import photos as a trial and see if you get the same message. Assistance to the creation of a new library, see using several libraries in Photos.
Another good step to try at this point is using the function of disk utility first aid to check your hard drive. See disk utility (El Capitan): check a disk or a volume for problems.
You answer with the results of these two steps may help provide some following steps, too.
Best regards.
-
Hello
I was getting some prob when I wanted to filter an EMG signal. It was a 3rd order Butterworth low-pass filter. I put the at10Hz of low cut-off frequency. He showed a msg "error-20023 occurred in filter-> Filter20023.vi Possible reason (s): analysis: the following conditions must be met: 0".< f_low=""><= f_high="">=><= fs/2."="" my="" original="" sample="" frequency="" was="" 51.2hz.="" i="" didn't="" find="" any="" option="" to="" change="" the="" deafult="" sample="">=>
Could someone help me please? VI is attached here.
Thanks in advance.
See you soon-
Taslim
Taslim. Reza says:
Thanks Norbert. Do you have any VI (for example) to create waveform data? I want to have a look at this to understand the facts.
Just go in the palette of waveform. There is a function to build a waveform. It looks like a package by name. The dt, is what distinguishes the data rate. A represents the actual data (your table) and t0 is the start time. You don't need to worry about t0 in this situation well.
-
The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.
-Thanks, MichaelHello
What version of the Windows operating system is installed on your computer?
I suggest you to refer to the following article in the Xbox and check if it helps.
Xbox LIVE connection issues:
http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in
If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.
Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10
Forums Xbox: http://forums.xbox.com/
Hope the information is useful.
-
2011 Vixia HFS20 camcorder don't recharge the battery
VIXIA HS20 don't recharge the battery and won't hold a charge.
I bought the camera in 2011.
I have two Canon brand batteries dead.
I've tried three off-brands so far.Blinks seven times slow, 1-2 second break, seven blinks.
Tried to charge 18 hours 12 hours. and 2 days.
The best I can get fee of 78 minutes. If I check and just leave, 48 minutes in less than 20 battery
Therefore, unresponsive responses to what to do when the battery is not:
If your camcorder works fine with power, and your battery will not charge.
Now what?
I'm supposed to get a CANON battery for $130, IF I CAN FIND ONE? Seriously?Richard wrote:
Hi Tuckerdognc,
Thank you for taking the time to post.
Even if the battery is not charged in your camcorder, you can recharge the battery of your camcorder using the battery charger CG-800.
I know. I found a market after charger that revives my BP-808 and bought a market after BP-819. So far so good. Have not really tried to use in the field yet, but I tested by turn on the recorder and to let it go for about an hour with 819 and then reloaded. 150 minutes is it is top. the 808 as I let it go 1/2 and I'm getting a load of 80 min. If they don't unload just to be attached to the camera, I'll be good. (Which seems to happen before I bought the charger).
-
Hello, I hope someone can help me! I have not used my camera in several months so I recharged the battery and for some reason that the screen does not light. I'll be honest, I'm a little bit challenged with this device. Can someone help me please? Thank you, Vickie
I have two batteries, so I just put in the other battery and it works now! I also put the other battery I thought I had reloaded on charger. Thank you for your response. Have a blessed day.
-
My system is 8 years old XP. I installed all the updates that are offered by Microsoft. No new material has been added since more than a year. I now get a message telling me that my copy of Windows must be activated. This happens in normal Mode and safe mode with networking. Is this a ransom trojan or MS did wobbly in the updates as Genuine MS debacle (DIS) advantages of the other? The Messages I have 3 days where activation!
Your tips for solving this would be appreciated.
Dear Noel
Thanks a lot for your information and advice.
Ironically, I did not clean ups for fear of screwing it up. However, I just bought a helmet camera and plugged into the USB to test its audio and video capabilities. Perhaps that may be the problem. Next time I'll just use the SD card reader.
I right click on the Hydroforme icon which has been remember to activate. Who took me through various routines that finally pointed out that the version of Windows I have is no longer for sale. He then offered to sell me a current equivalent of Windows 7. Unwilling to part with the money right away, I did a reboot and followed by the option activate who came. It's very simple and work very well without fees.
So, I'm now a "happy bunny". Thanks a lot for your quick help. Very much appreciated.
Concerning
Pete
-
Hi Ive got three computers in the home two of them are not connected to my TALKTALK router no problem, but the third connect once but its gives me "the network password must be 40 bits or 104 bits according to your network configuration. This can be entered as 5 or 13 characters ascil or 26 hexadecimal characters. "error please help
for any other computer my password work but when I try the same password for this one gives me the message above.
Thank you all
original title: 40-bit or 104-bit error
Maybe you need this patch: http://www.microsoft.com/download/en/details.aspx?id=1974
What version of Windows using this computer and what type of encryption is the router? -
created an ad hoc network on Windows 7 Home premium machine. When the password was presented by the XP machine at home, the message: "the network password must be 40 bits or bit 140 according to your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. Do not know how to proceed. Advice requested
MNewsome salvation,
I suggest that you download and install the latest drivers for the network adapter on the computer to the adapter manufacturer's website and check if it helps.
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Also check out the link below and download the document to learn more about the Ad hoc network.
Special Internet sharing with Microsoft Windows XP
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13190
Set up a computer-to-computer (ad hoc) network
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network
Maybe you are looking for
-
I would like to know what happened to the video of Michael Jackson original that I bought at the called 'Blood On the Dance Floor'. I went to play today, August 20, 2016, and he wasn't the same version I bought. WHERE THE ORIGINAL VIDEO IS. I'm not
-
Tecra A8-158 freezes several times
I use a Tecra A8-158. I bought in February and after that maybe in the first week of use, he got froze up.I remember that in the first month, that it froze only 2 times, but after that it goes as many times. Sometimes it works fine for days and somet
-
Maintenance and Service Guide for G60 - 657-CA
I'm looking for the maintenance and Service of guide for the laptop G60 - 657 CA... I can't find it on the HP support site but was able to find other manuals... any help greatly appreciated. Thank you
-
Interface and installation of my instrument with lab view and keithely, GPIB-USB-HS
Hai... We have 236 Keithleu and software vision lab and GPIB-USB-HS. I had the GPIB software installed is OR-488. 2 3.1.1 Now, I had the indication like that. 1. in Kethely no indication 2. in GPIB +'s got orange led in ready icon. 3 but if I runt th
-
prnport.vbs to add and select the port
I have the following script, where he creates a port of the printer, for example, 10.10.21.22. He created the port, but then I have to manually select the port in devices and printers. How do I update the port also? There is a r - updated the port, b