Recipe book

Similar Questions

• Russian text œuvres, Polish text only - recipe book, please

  People,
  
  DW CS3 Mac OS 10.4.x
  
  I got a few paragraphs from the Russian text by email and MS Word files that I need on web pages. I just copy - paste the text into a web page of DW8, publish, and - no problem at all - I see the same exact text in my browser. (I can't read Russian, but I recognize that the two representations are identical).
  
  I did something special in DW, not that I know well. In DW8 fonts preferences, "Unicode UTF-8 4.0" is selected.
  
  I just got a Polish text and I tried exactly the same method. No, does not work. The characters that are the same about Latin America are displayed correctly and the Poland is represented correctly in DW8, but after publication in browsers, the Polish diacritics appear... completely wrong. I tried two different browsers. No difference.
  
  What can I do to get a Polish and Russian text will be displayed on web pages, as simply as possible? What I have to give up Russian for the poles? (Not OK! "I need both). Everything is fine for only the main browsers to show the texts correctly and to impose special preference settings in the browsers if necessary.
  
  Note: I'm fairly technical, but I could never understand how it all works, nothing more simple ASCII representation. I would appreciate if possible a recipe book.
  
  TIA,
  
  Henry
  

  Pilot error!

  Problem solved.

  Sorry for the trouble.

  -Henry

• Bad link to recipe book

  The link at the top of the forum for the just 'Lightroom' Cookbook brings back me to the community: homepage.

  The target of the link is http://cookbooks.Adobe.com/lightroom_sdk .

  This was removed from adobe.com or something else in the current site?

  TKS, louie

  Looks like Adobe Cookbooks is definitely dead, according to the Member of the Adobe staff posts in this thread:

  http://forums.Adobe.com/message/5724928

• Why can't I sync all my books?

  I use iTunes 12.4.1.6 with iBooks 1.5 on OS X 10.11.5, as well as a Mini iPad and iPhone 6. My iBooks collection contains about 360 pounds, including records for the electronic components, recipe books, photography books, you name it. Formats include ePub and PDF formats.

  In iTunes, I can only see a collection of 53 books, which seem to be the ones that I bought at the Apple Bookstore.

  How can I get iTunes to recognize all the books I have in iBooks and sync it with my iPhone 6 and iPad Mini?

  If this cannot be done, what book reader application can I used on the iPad and the iPhone which will allow me to read ePub and PDF, as well as annotations, notes and bookmarks?

  Here the answer: iBooks not syncing with iTunes

  Short version: iTunes now iCloud drive books, not synchronize collection local iBooks.

  This means that you must have enough storage iCloud to fit all your books. If you do not have iCloud, you can not use iTunes to sync your books between desktop and tablet.

  In addition, you will need enough of broadband bandwidth mobile/cell and data allowance to download the books you want to read. So be it if you have 6 GB of books, or want access to the manual of your camera when you are out of wireless coverage.

• How can I download producer?

  How can I download producer when you use iBooks author and iTunes Connect to publish my recipe book for free?

  I created an account, completely separate from my normal Mac ID after reading some of the tips in these forums. Now I can progress through the sequence edition without any problems until the end when I get the message download producer so that my book can be exported. By clicking on the link takes me to the page resources and assistance and there is no way that I can download Producer.

  I received an e-mail telling Apple my iTunes Connect has been created and I confirmed that I created the account.

  There is no indication of Apple as to why I can't download the producer, what should be a simple process to click on a link as my iTunes Connect has been created, which means it's OK for me.

  Is it other things Apple or reluctance to allow users to create the iBooks?

  Some help would be appreciated.

  Regarding

  Schof

  Have you tried to go directly to iTunesconnect with your browser and connection here (without doing anything with iBooks author).  Resources and help > submit your book > iTunes producer

• IQ 526: Losing touch

  OK, I had of the probvlems with the touch screen in this unit for as long as I got.    The topuch function is much more useful in Windows 8, 8.1 and 10 that he wes in Viwta or 7.

  ATER much effort, with the help of this map and other spots on the internet, I was able to run Windows 7, 64 bit.  I then upgrded to prview 10 and it worked for 2 boots.  Nextwindow and HID touch screen drivers were insetalled when you use the "peripheral hidden Show" in Device Manager.  but on t 3rd he restarted, wnet touch away.  Readers still presented, but showed the errors 'Code 45' indicating that the touch screen is not connected.  I think that Windows has automatically updated the video driver GEForce Nvidia, but am not sure it makes a differenc.

  Any ideas?  I'm not really interested a response from recipe book, as those who have not helped so far.  WEhy would be re-startup disable the touch screen?

  OK, I fixed that with a bit of luck.   HP provided that Cookbook that meets never worked.  Googling the question, I have cam through a discussion on a Dell Board with same problem on a Dell AIO touchscreen.  Apprently the Windows 8.1 upgrade causes Windows stop the power of the touch screen and stopping.  Thus, drivers become hidden in Device Manager and display errors 'Code 45.    The school?  Disable the ability of Windows to turn off all USB devices.

  As noted, I went to the Device Manager and clicked on the hidden Interface devices.  I then used the 'view' comand to show he's hidden connected d.  Then, by clicking on each Devcew entry USB, I called properties, then on management of Powe.  I then unchecked the box to Windows to tun off the unit.   I then rebooted and alto, Touch was back.

  I hope this helps someone else with the same problem.

• QML Preview

  Hi all

  The QML preview does not work if I use an ImageButton to the assets of the specified image.

  or a view of the image, but if I use a simple button, the button appears in the QML preview.

  Also, I downloaded the recipe book of waterfalls (qml) all widgets in the same are visible in preview QML.

  P.S. I m using the static assets selection.

  Been through this: http://developer.blackberry.com/native/documentation/cascades/dev/tools/qml_troubleshooting.html does not.

  Any ideas anyone?

  Please don't answer.

  Kind regards.

  Well, this seems to be the fault of PNG file, you can try to check the integrity of the image with this program:

  http://www.libpng.org/pub/png/apps/pngcheck.html

• Problem to the Simulator application deployment

  Hi all

  I installed the Simulator and QNX. The Simulator starts fine and when I go to the window > Preferences > Blackberry and launch the deployment of Blackberry, my Simulator is found and added.  However, it did not create a build for the Simulator configuration (I have that by default) and so I can't deploy to test.

  I'm running Windows 7 pro with VMWare workstation 8

  Help, please!

  Thank you Smartek respondent

  It is, I tried another example of project and that was very good. When I looked back to the original sample (cascades recipe book) I built wrong.  This example seems to contain several different projects, and once I chose the right pair, my debug Simulator was there.

• I need VPN gateway to gateway with NAT for several subnets, RV082

  I have a pair of RV082 routers and I would like to configure a gateway to gateway VPN tunnel, as described in a book, "How to configure a VPN tunnel that routes all traffic to the remote gateway," (name of file Small_business_router_tunnel_Branch_to_Main.doc).  I followed this recipe book and found that my while the main office has internet connectivity, the branch subnet is not an internet connection.

  Routing behaves as advertised, where all traffic goes to the seat.  However, the 192.168.1.0 subnet in the branch receives no internet connectivity.  I read in other posts that the main router will provide only NAT for the local subnet, not the Management Office subnet.  Is it possible to configure the RV082 router to provide NAT for all subnets?

  If this is not the case, what product Cisco will provide connectivity VPN Tunnel as well as the NAT for all subnets?  The RV082 can be used as part of the final solution or are my RV082s a wasted expense?

  Here is the configuration that I had put in place, (real IP and IKE keys are false).

  Bridge to bridge

  Remote Head Office

  Add a new Tunnel

  No de tunnel                  1                                               2

  Name of the tunnel:, n1 n1-2122012_n2-1282012-2122012_n2-1282012

  Interface: WAN1 WAN1

  Enable :                   yes                                             yes

  --------------------------------------------------------------------------------

  Configuration of local groups

  Type of local security gateway: IP only IP only

  IP address: 10.10.10.123 10.10.10.50

  Local security group type: subnet subnet

  IP address: 192.168.1.0 0.0.0.0

  Subnet mask: 255.255.255.0 0.0.0.0

  --------------------------------------------------------------------------------

  Configuration of the remote control groups

  Remote security gateway type: IP only IP only

  IP address: 65.182.226.50 67.22.242.123

  Security remote control unit Type: subnet subnet

  IP address: 0.0.0.0 192.168.1.0

  Subnet mask: 0.0.0.0 255.255.255.0

  --------------------------------------------------------------------------------

  IPSec configuration

  Input mode: IKE with preshared key IKE with preshared key

  Group of the phase 1 of DH: Group 5 - 1536 bit group 5 - 1536 bit

  Encryption of the phase 1: of THE

  The phase 1 authentication: MD5 MD5

  Step 1 time in HIS life: 2800 2800 seconds

  Perfect Forward Secrecy: Yes Yes

  Group of the phase 2 DH: Group 5 - 1536 bit group 5 - 1536 bit

  Encryption of the phase 2: of THE

  Phase 2 of authentication: MD5 MD5

  Time of the phase 2 of HIS life: 3600 seconds 3600 seconds

  Preshared key: MyKey MYKey

  Minimum complexity of pre-shared key: Enable Yes Enable

  --------------------------------------------------------------------------------

  If you are running 4.x firmware on your RV082, you must add an additional Allow access rule for the Branch Office subnet (considered one of the multiple subnets in the main office) may have access to the internet. Note the firmware version has more details about it.

  http://www.Cisco.com/en/us/docs/routers/CSBR/rv0xx/release/rv0xx_rn_v4-1-1-01.PDF

• Replication of TMS

  Hi all

  Anyone know how is the procedure to replicate the configuration and the SQL database between two TMS.

  We have a TMS as a primary school, and we want the second TMS as a backup (with services to the bottom). We think we do a replication once a week, but we don t know how to do.

  We read a lot of guide installation and pdf of Cisco / Tandberg, but it is impossible to understand very well how do... someone has a recipe book (for Dummies please!)?

  Thanks in advance

  Juan Granata

  Juan,

  As far as I know, TMS doesn't support the SQL database replication.  However, you can point multiple TMS servers on the same database.

  Thank you

  Justin

• Display vertical gridlines on the line chart

  Hello world

  I looked in the recipe book and saw no option to display vertical gridlines on a chart.

  A bubble chart has vertical line. Any help would be appreciated.

  Thank you

  ARIS

  Hello Aris,

  Vertical gridlines can be activated on the categorical axis cards and time by defining:

  xAxis: {majorTick: {rendered: 'on'}}
  

  Hope this helps,

  Hugh

• How to make observable ojSelect

  Hello

  I have two components of ojSelect that is bound to the same observable model. But when I change the option in an ojSelect doesn't think in the other. I tried with the given example @ binding Oracle JET - Select - Options

  And I modified the html code and script below. Can someone tell me what I'm doing wrong here? [I tried the same thing with ojInputText and is working fine IE, I have two inputText elements related to the same ViewModel and change of a text area is reflected in the other.

  HTML

  < label for 'select' = > select < / label > < select id = "select" link = "ojComponent: {component:"ojSelect", options: browsers,}" {rootAttributes: {style:'max-width: 20em ""}} ">" < / select > < label for = "select123" > Select123 < / label > < select id = bind data "select123" = "ojComponent: {component:"ojSelect", options: browsers,}" {rootAttributes: {style:'max-width: 20em ""}} ">" < / select >

  Script

  require ([' OJ/ojcore', 'knockout', 'jquery', ' OJ/ojknockout', ' OJ/ojselectcombobox'], function (JO, ko, $) { function selectModel () {} This.browsers = ko.observableArray([) {value: "Internet Explorer", label: "Internet Explorer"}, {value: "Firefox", label: "Firefox"}, {value: "Chrome", label: "Chrome"}, {value: 'Opéra', label: 'Opéra'}, {value: "Safari", label: "Safari"} ]); } var sViewModel = new selectModel(); ($(document) .ready) function() {} ko.applyBindings (sViewModel, document.getElementById ('select')); ko.applyBindings (sViewModel, document.getElementById ('select123')); } ); });

  It seems that the list of values is shared between the two components of the ojSelect, but the value itself is not shared. Add this to your viewModel:

  this.val = ko.observableArray(['Firefox']);
  

  Then add this to every ojSelect in the html code:

  value: val
  

  More details in this recipe book demo:

  ---Select---Select only Oracle JET

  Hope this helps,

  Hugh

• Cloning 11i, 12.0 and 12.1

  Hi all

  Is cloning procedure even with 11i, 12.0, 12.1?

  Thank you very much

  JC

  Hello JC,.

  There are not many changes in the standard process compared to the 11i/R12.0/R12.1 of cloning.

  See below the two MOS notes IDs to prepare your recipe book customize clone that best suit your environment.

  Version 11i: Note 230672.1 - 'cloning Oracle Applications 11i with rapid Clone version.

  Release date 12: Note 406982.1 - "cloning Oracle Applications V12 with rapid Clone.

  Coco - M

• Leave the button to play the audio only twice

  I am building an assessment of the foreign language with audio passages that the user must listen to then answer two questions about this. The user can play the audio twice. But even if I put 2 number of attempts, when I tested it, I was able to play the audio unlimited times. What is the trick?

  

  You seem to misunderstand the 'attempts' to an interactive object, will attempt to clarify. It does not limit the number of clicks ON the interactive object (here a button), but saying how many attempts can be 'impossible', which means clicking outside of the object. For your use case failure action would never happen, because the user always clicks the button, never outside it. Even with the project to continue that left you for the action failure: never happens.

  For the successful action, you use the command Play Audio, with project to continue unchecked: This means that the user can click several times, the playback head was never released, and audio can be played as many times as you want. The solution is to use a conditional, tip action (not a standard action because you want to allow 2 attempts, sorry David - TLCMediaDesign) and a counter variable. Here are the steps:

  • Set a user variable v_attempts with a default value of 2
  • Create a tip action to be triggered by the button that looks like this:

  

  It is always prudent to turn off the button before you hide it. Or you can just keep turn it off. This action also allows you to show the attempts left in a container of text:

  1. Before the first click: v_counter = 2
  2. After all, first, click on: v_counter = 1
  3. After the second click: v_counter = 0 and since it is more possible to click, there's = 0; This is important because CP is not very mathematical mind, does not see the difference between a negative and a positive number.

  It is also very easy to change the number of retries by simply changing the default value. Think it will be one of the (easy) scripts in my recipe book future actions. TNX for the question.

• Use a template or something else?

  Hello, newbie here

  I create a recipe book, so most, but not all pages have the same format. What I'm learning, I can create a template so that everything is in the same place for each recipe page, but I don't know if I can add this model to my document several times, for example, the model is a page, and I want to use this model x times in a document

  Much there is another solution for this - I think not what master pages as some pages will be different, for example the introduction

  Thanks for the tips!

  CL

  A template is a complete template document. What you want is called a Master Page, a page of model on which others can be based. You can start by reading about this in the help files, or try some of the tutorials online or get the text of the good beginner, as Visual QuickStart Guide of Sandee Cohen of InDesign.