Reclassification of 5.1 7 E1 to 6.1

I know I must upgrade to 1.0000 E1 and then to 6.1, but the instructions say to do the upgrade via the CLI. This isn't a problem, but I was wondering if I can do the upgrade via the ASDM thanks update IPS sensor instead.

Looks like you have SNMP enabled on your sensor.

In version 5.1 community channels were default values, but this was considered a possible vulnerability as the community strings are considered as passwords. So in version 6.0 and higher, there is no more default values for the community strings.

If you do not use SNMP, then just turn it off and try the upgrade again.

If you don't use SNMP, then decide which community strings to use specially for your site and configure them on the sensor of 5.1.

(NOTE: If you want to keep the default values, then just type the actual values in the field using the CLI.) They will be considered specified by the user and can be carried forward in version 6.0).

Once your community strings are configured, then repeat the upgrade.

Tags: Cisco Security

Similar Questions

  • No problem of reclassification of Maverick in El Capitan

    Must what members experience reclassification of Mavericks at El Capitan? It is worth?

    Reclassification of Mavericks in El Capitan, this isn't a problem. Whether or not it is worth depends on what you like and if you need the features provided by El Capitan, which is not provided by the Mavericks.

    However, make sure that your applications are compatible. At least 4Gig memory. If you intend to continue using iPhoto, make sure that you update to the latest version 9.6.1.

    IF you have another disk, you might install on test and try it first. It is perhaps the best way to go.

    Anyway, have a good Time Machine backup in case you want to restore.

  • Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

    Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

    Thanks for your reply but I've solved the upgrade Viata HP to W7 HP Viata in Spanish. Took a lot of effort but is workig now. My major concern is on the regional setting: my country is Venezuela and this is probably the only country that is missing from the long long list so I now have problems in the keyboard language and the motto puntuation. This has nothing to do with the Home Premium edition or full, I think it's just an incredible mistake. How can this be repaired? MS will have remedies this problem and probably to publish an update to fix this problem. Thank you again and hope that this question goes to MS. looks.

  • Reclassification of W7 to W10 keeps failing

    Reclassification of W7 to W10 maintains fault please help

    Try to upgrade manually:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Kernel panic reclassification of 10.8.5 at El Capitan

    Hello, I tried to update Mac Pro Cougar wife 10.8.5 up El Capitan. The upgrade process seems to be okay, but put it back on, I get a gel and a spur of the panic code on screen. I have absolutely no idea of what that means, so I hope that someone out there might be able to understand.

    Mac Pro

    In early 2009

    2.66 image

    13 GB OF RAM

    I know it's quite an original model, but it is on the list as being extensible.

    Apologies for any errors in the code. All I could do was shoot with my phone for reference and type it from there:

    panic (cpu 2 appellant 8xffffff8812fb11fa): "TLB invalidation IPI timeout" "CPU has not responded to interruptions, on which the bitmap bitmap CPU to CPU: accused reception 8 x 1, NMIPI: orig: 0x0, now: 0X0"@/Library/Cashes/com.apple.xbs/Sources/xnu/xnu-3248.30.4.

    Called debugger:

    Backtrace (2 CPU), Frame: Return address

    0xffffff91a9e338c0: 0xffffff8012edf792

    0xffffff91a9e33940: 0xffffff8012fb11fa

    0xffffff91a9e339e0: 0xffffff8012fb1b07

    0xffffff91a9e33a70: 0xffffff80112f59b49

    0xffffff91a9e33ad0: 0xffffff801344a115

    0xffffff91a9e33b50: 0xffffff8013449d80

    0xffffff91a9e33bc0: 0xffffff8013449a81

    0xffffff91a9e33c30: 0xffffff8013449a81

    0xffffff91a9e33ca0: 0xffffff8013447482

    0xffffff91a9e33cf0: 0xffffff801344726e

    0xffffff91a9e33d50: 0xffffff801346200c

    0xffffff91a9e33dd0: 0xffffff8012f2a806

    0xffffff91a9e33e30: 0xffffff8012ee3ef3

    0xffffff91a9e33e60: 0xffffff8012ec78a8

    0xffffff91a9e33ea0: 0xffffff8012ed72e5

    0xffffff91a9e33f10: 0xffffff8012fbcd2a

    0xffffff91a9e33fb0: 0xffffff8012ff0a56

    The process corresponding to the current thread BSD name: kextd

    Mac OS version:

    15 D 21

    Kernel version:

    15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4-1/RELEASE_X86_64

    Kernel UUYD: DECC9F02-27D7-31F0-9599-A9EF2873902C

    Slide kernel: 0x0000000012c00000

    Text of core base: 0xffffff8012e00000

    _HY8 basic text: 0xfffffrf8012d00000

    Name of system model: MacPro4.1 (Mac-F2218EC8)

    Availability of the system in nanoseconds: 98653262431

    Machine-check capabilities: 0x0000000000001c89

    family: 6, model: 26 stepping: Firmware 5:17

    signature: 0x186a5

    Intel Xeon W3520 CPU @ 2.67GHz

    9 banks of error reports

    She is now back to a Carbon Copy Cloner upward 10.8.5.

    Thank you
    Ed

    Hi Ed - M,

    Welcome to the communities of Apple Support! I'm sorry to hear you had this problem during the upgrade to El Capitan, but I'm glad to hear that you were able to get the machine upward and running in the meantime. If you experience similar problems when you then try to update/upgrade, or would like more information on diagnosis and troubleshooting of kernel panics, you can find the following article useful (my apologies if you have already seen it):

    OS x: when your computer spontaneously restarts or displays "your computer restarted because of a problem." - Apple Support

    Concerning

  • HP Pavilion g6t-2000 CTO Notebook PC reclassification of i3 to i7

    Hello, I have a HP Pavilion g6t-2000 CTO Notebook PC with processor i3 - 2370M Intel (r) Core I want to upgrade to an i7.  Is this possible?  And if so, what processor do I get?  Thanks for any info in advance.

    Hi EHolmes:

    Thank you for your query... I'm please to provide this information.

    I'll send you a link to the Maintenance and Service Guide click here. If you click on the product description, left, under processors. on the right is a list of a compatible for your device.

    To answer your question directly, not an I7 is not compatible.

  • Reclassification of Mavericks in El Capitan

    Hello

    Other cloning my Mac HD (Mavericks) before continuing, there are other specific action, I must take before installing the upgrade on El Capitan?

    Thank you

    Gary

    1. Fix the hard disk and permissions.
    2. Updated all third party applications to ensure compatibility with El Capitan if required - see compatibility App - RoaringApps table.
    3. Back up your data. Or use the disk utility's restore option to clone your system to a backup drive.
    4. Verify that the backup is where it should be. If you cloned verify that the clone will start the computer.
    5. Download El Capitan from the App Store.
    6. Before you install, make a copy of the installer to ensure the guard.
    7. install El Capitan.
  • HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

    HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

    After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

    Hello:

    Follow these steps, and I'll post the link to the wireless driver you need...

    Go to Device Manager, find the other devices category, click the network controller needing drivers.

    Then click on the Details tab at the top of the control of the network window.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    Drop down on it and select the second item in the list (Hardware ID).

    After the first string of characters that start with PCI\VEN.

  • MainStage 3.2.3 hangs after reclassification of the 3.2.2

    I learned Mainstage and have implemented several concerts...  Everything was cool with 3.2.2 and the latest OS update 10.11.2.  Then I upgraded to 10.11.3 and Mainstage 3.2.3 and Mainstage crashes when loading... (attempts to load the concert).  Man, I spent a lot of time to set up this concert.  Any useful suggestions?

    Thank you

    Anton

    You get a crash report? Please share =)

  • Compaq CQ5123F: Reclassification of E5200 to E5800 to E7600 to E8500: and NO Mo, FSB change required

    I want to improve my processor a little of the original E5200 to an E5800 with the same speed of the FSB and power but @ 3.2 GHz (800 MHz/65 watt @ 2.5 GHz).  As the Compaq BIOS has no FSB changes page, are there jumpers or the microswitches of the card mother MSI MS-7525 I need to change to support the extra speed of the processor?

    Compaq CQ5123F:Windows 10 Millennium Edition - Core 2 Duo E8500 3.16 GHz - 4 GB DDR2 800 MHz - Samsung 850 EVO 250 GB with RAPID; Radeon HD4350 512 MB video; BenQ G2220HD 22 inch LCD monitor; HP Deskjet F4480 AIO; Altec-Lansing BXR1121 - 2.1 speakers

    Who told you all this BS RAM?

    You don't HAVE to have to run a CPU FSB of 1066 MHz to 1066 MHz RAM!

    Your RAM (Ex 800 MHz) already has an overload on the CPU, because of the DRAM: FSB.

    You upgrade later (E7500/E7600) with front side bus at 1 066 MHz would be 1:1 ratio with a DDR2-533 (PC2-4200).

  • reclassification of 10.6.8 to Yosemite or El Capitan?

    I want to upgrade my Mac (Snow Leopard 10.6.8) to El Capitan, Yosemite or mainly so I can install Dragon Voice to the Word program.  Upgrade is recommended for this use and other global features?  Have 4 GB of memory... is that enough?

    Since Yosemite is no longer available after the release of El Capitan, El Capitan is now your only choice now.

  • reclassification of 660 to 970

    So I will improve my GPU to a 970 soon all the beautiful and good. I know how to do such things, the problem is that my current 660 uses a power connector 6-pin and the 970 uses two 8-pin or 6-pin + 6 pins (depends on which I get). None of the cables are labeled PCIE or anything, they just p10, p11, p3, p4 and so on. the 6 - pin connected to the 660 is p10 and the marked p11 one looks like it, there is nothing in the manual or on the website. Any ideas on how to identify the appropriate cables? Thank you

    PC - HP ENVY h8 - 1520t CTO

    PSU - DPS - 600WB A

    SuperAdan0007, welcome to the forum.

    The P10 and P11 are two PCI Express 6 power connectors pins according to what I read on the power supply 600W.  In addition, the power supply can come with a conversion of 6 to 8 pin cable.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • HP Envy 17-jk130us Touchsmart: reclassification of 8.1 W at 10, button does not work

    This laptop was purchased with pre-installed Windows 8.1. Windows 10 software is on my C drive and I tried to install it. The window asks for the key. I ran the Command wmic path OA3xOriginalProductKey softwarelicensingservice GET.

    It gives me a key, but the Setup program indicates that the key is not working. Some sites say that all updates must be installed. Fact!

    Some sites say ignore the key and move on. I can not because the software is very pretentious - OK cell is grayed out.

    Any suggestions? Either way, I can't believe all the fluff on the Internet about installing W10. BTW, I installed W10 on an old ASUS Eee PC with no problems.

    Hello

    Thanks for posting in the Forum from HP Support.

    Please, refer to this topic: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/problem-with-activation-after-upgrade-to-windows-10/td-p/5172044

  • Reclassification of Windows7 32-bit to Windows 7 64 bit

    I am running Window 7 Ultimate 32-bit and upgrade to Windows7 Ultimate 64-bit.  Can I do without losing all my files and programs, i.e., a 'upgrade?  Or will I have to reinstall everything if I convert to a 64-bit version?

    Thank you

    Hello dmssmd1234,

    It is not possible to perform an upgrade from x 86 to x 64. You will need to install the x 64 version with cleaning moved.

    Hope this helps

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Reclassification of Vist to Windows 7. How can I purchase a version upgrade compared to the purchase of a new package of Windows 7.

    I have Windows Vista 64 bit, OEM installed on my computer, but does not receive the original disk.  Looking to upgrade to windows 7.  At the same time, I want to start with a clean hard disk (reformatting).  I also have a box of 7 windows CD, but it has been installed on another computer.   How can I reformat my hard drive and do a windows 7 upgrade.  I think that if I can get another license number, I can use my cd to do the reinstall.  suggestions?

    Hello

    It depends on the type of Windows 7 license you, as to whether you can transfer it or not.

    Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

    OEM licenses are not transferable.

    If you have purchased your own license retail of Windows 7 and installed yourself, yes you can transfer it to another computer.

    Retail licenses are transferable.

    Just be sure that you have only installed on one machine at a time.

    A single license means one Installation.

    And there is no way to upgrade between 32-bit and 64-bit, or 64 bit to 32 bit.

    They must be the same bit syastem of operation or a clean install should be done.

    There are several methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Reclassification of Explorer 7 to explore 9 under Vista Home Basic

    I'm trying to update to Explorer 9; but I have my computer is not equipped with the necessary components (vista SP1 and Vista SP2) first of all, I need to download vista sp1; However, even has not downloaded automatically even if my computer is set to receive updates. IM advised of no not for download from the Download Center for my personal computer as it is massive; but I can not download through windows updates, because he's not here for download. Can you give me any help as to how I can download the small version? Thank you

    Learn how to install Windows Vista Service Pack 1 (SP1)

    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

    Windows Vista Service Pack 1 standalone installation) (KB936330)

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

    Ignore the ' "DO NOT click DOWNLOAD IF YOU are UPDATING a COMPUTER:".

    UTC/GMT is 20:10 Sunday, August 5, 2012

Maybe you are looking for