Recognition of my router with my computer

Similar Questions

• Can I have a router on my computer?

  Network wireless adapter NIC Ethernet network device

  Can I have a router on my computer?

  Hello

  You can use a wireless router with your computer. Wireless routers are devices used in wireless networks. Your computer connects to them in order to join a network.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• share my internet connection with another computer using a router

  My question is if I give you my wep key to another computer in my house so that it can access the internet will be my files or no matter what content of my computer stays private, I need to share my internet connection without sharing something else?. Thanks JF

  In general, it is safe to do so - just a person granting access to your network will not give them access to your files on your computer unless you are already sharing files with another computer on your network.  In this case, you want to check your sharing settings to make sure that the shared files are not available for all users of the network.  The thing I'd be worried, is whether or not the person you share with is "don't own"-no virus, malware, etc. on their computer, given that some of these programs can spread via a shared network connection.

  "Jeanfrancoisdoray" wrote in the new message: * e-mail address is removed from the privacy... *

  My question is if I give you my wep key to another computer in my house so that it can access the internet will be my files or no matter what content of my computer stays private, I need to share my internet connection without sharing something else?. Thanks JF

• New HP Envy 4500 will not connect with my computer

  New HP printer shows blue light of connection with my wireless network but the printer connects with my computer (Windows 7 64-bit)

  I tried troubleshooting with doctor without success.  I thought about the restoration to the manufacturer's specifications. but worried about this procedure.

  Confused.

  Help please

  Adnilybrek28

  Welcome to the HP Forum.

  There is lots of useful information to the Web site of your printer.  In addition, the most important thing you can do is to install the full features software for your printer.  The installation process should help you with the login process.

  General instructions to install the printer software

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open of printer drivers HP ENVY 4500 e-all-in-one
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  •         Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  •         Scroll through the list of videos back until you find the video that best fits your situation.
  • Connection USB: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  When the answer is a good fix or workaround, click accept as Solution !

• I just buy an Ipad and trying to put up with my computer at home. Can anyone help?

  setting up wireless on home computer

  Hi, just bought an Ipad and trying to put up with my computer at home.  Can anyone help?

  I tried, but nam said that I need a wireless card?

  Thank you Debbie

  You must use a wireless card, if you want to use it on a computer. What exactly do you want to contact? Your computer, or a wireless modem / router? If a router, you must connect in it and then configure that

• Access to the COR to two XP systems behind a router with a single public IP address

  Hello

  is it possible to access the RDC to two XP systems, with two different port for the DRC, behind a router with a single public IP address?

  Please note this ia a small home network without any parameters of the field. I use IP to access DRC.

  You comments are appreciated.

  Thank you

  Use different ports for the DRC on both XP and configure the router to redirect to the appropriate port on the appropriate computer.

  See the article in the Microsoft Knowledge Base How to change the listening port for remote desktop .

• Problem connecting Dlink - the connection with this computer still only shows "Local".

  My Dlink wifi can connect to all of my other computers, with the exception of a laptop Fujitsu running Vista. Only the connection to this computer always shows "Local".

  Dlink and Fujitsu point to another, and Microsoft has no viable solution. Help!

  Hi AlLohUX,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem provided, I understand that you are unable to connect to the network on the Windows vista computer. Wifi connection Dlink says local only.

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  Save your work and restart the machine.

  On the router or the modem:

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you can reset the TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  (a) disable the IP helpdesk:

  (b) hold Windows key and type R, type "services.msc" (without the quotes) and press enter

  (c) scroll down to the IP assistance service, right-click on it and select Properties
  In the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply'.

  (d) then click on 'Stop' to stop the service from running in the current session
  Click OK to exit the dialog box

  Also, check out the help articles and check.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• With the help of WRT300N Wireless Router with a USB modem (satellite)?

  Hey there!  I tried to find this answer in various places online, and I saw a few things that have led me to believe that this is possible, but nothing to explain as thoroughly as I'd like.  I have a N of Linksys WRT300N wireless router.  For the next few months, new home construction we do service by cable or DSL, so we use the Cricket's broadband Internet, which connects via a USB port (Cricket is a 3G network, managed by a cell phone company).

  I'm trying to understand if there is anyway that I can connect internet Cricket USB to my computer, as usual, but then connect my router to the computer somehow so that I can distribute this wireless signal?  I'm having crazy to move the thing USB from one computer to another and would really like to connect my PS3 wireless signal, thus.

  Does anyone have an idea how this could be done?  If so, could you explain to me what I need to do quite exactly?  I am running Windows Vista on this computer.  Thank you very much in advance for your help.  You're going to be spare me months with a value of pulling my hair out, believe me.

  Yes you can do it, USB Modem not connecting to the computer, the computer must be connected to the Internet Port of the router and then it will give a Wi - Fi connection and...

  To do this, you need to enable Internet Connection Sharing (ICS)...

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Internet problems with my computer!

  Hi, my name is Jessica. I have no where else to go. I need your help so baaad. I scanned my computer if the material has been screwing up, but the computer says that there is a signature in an IP error. I don't know what else to do! Help, please. If you have more specific information to solve my problem, feel free to ask!

  -Thank you. :)

  Hello

  I made an assumption that there is a wireless connection.

  If not, please help us to mitigate the "guessing game" factor in the provision of aid and give the relevant details of your computer systems.

  ------------------------

  There is an inherent Catch22 to attempt to repair a computer wireless through wireless. Given that the without wire is not connected to the source, there is no interaction between the wireless source and the Wireless Client and no frame of reference to find what works and what does not.

  As a first step, I will temporarily move the computer to a place close to the wireless router and plug with a wire.

  When he works with a wire, switch Off the Wireless Security in the router, disconnect the wire and try to make wireless work. This must be done when the computer is always close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Dell V313 printer cannot communicate with the computer

  When I try to print from my Acer Aspire Windows 7 on my dell v313, I get the message "communication not available - the printer cannot communicate with the computer. It's already happened, but when I restarted the computer it would print. Now, it won't. I replaced the USB cable and downloaded the last Cabinet V313 - and the software. Ink cartridges are filled. I am holder of a horse's hoof and a 4 leaf clover; but nothing works. What can I try now? Thanks for any help,

  Mike

  Mike,

  You can try to disable the ToolTips of printers. If the printer is wireless, try channel 11 in your wireless router. You can also try to remove computers printer scan list and then restart the computer and see if it prints.

  Start, Control Panel, devices and printer, your printer, printing preferences, advanced, more control options. Tell him to never show. The problem with this setting is that you can not tell if you are weak of ink, printer jams, etc..

  

  Rick

• How to find the IP address of the router from my computer in Windows 7?

  What is the best way to find the IP address of the router from my computer in Windows 7? I know not how to make using the start > cmd > ipconfig, but is there a way to do it with just the mouse?

  Right click on the WiFi icon or-> LAN in the system tray click on open network and sharing Center-> click on "Wireless network connection"--> details click-> see item highlighted on the screenshot:

  

• How can I register in my system, my desktop PC with my computer name?

  During the implementation of my desktop PC, I classified as a workgroup computer, but I only have a single PC.  In devices and printers, I have an icon for a laptop (with a yellow exclamation point) and the name of my computer on this subject.   In properties, this icon, under the Hardware tab is listed (with a yellow exclamation point) controller (USB) universal serial bus.  In the device under other devices Manager, I have a driver (with a yellow exclamation mark) on (USB) universal serial bus controller.

  Network, there is an icon for a laptop with my name of the computer on this subject.  It is also included in the network, devices, an icon with my name of the computer on this subject.  My desktop PC is not a media device.   I would like to delete the icon of the laptop and the Media Device with my name of the computer on and make sure that my desktop PC is registered in the system with my computer name.  My PC is not a PC network; I do not have a router.  Now my desktop PC doesn't have my name on the computer.

  I don't remember very well, but I could have a visitor with his work cell phone, trying to access his computer of the company set up by plugging in via USB in my computer.  It didn't work, so I gave the thought is no longer.

  I do not end up ignoring the notebook icon in devices and printers.

  I thought that the computer was not registered as my desktop PC from the laptop icon and had all two "other devices" in device to the (USB) universal serial bus controller Manager.  Computer has already listed in Manager devices, but with different drivers.

  I didn't do another post "no drivers for other devices" and listed the hardware ID.  I got a response and downloaded the driver.  When I did two exclamations disappeared, "other device" was no longer listed in Device Manager.

• My Lexmark interpret s405 printer has stopped communicating wirelessly with my computer

  I used the printer for about 18 months without any problem. Then all of a sudden the printer has stopped communicating with my computer. I use W7. Looks like the wireless connection failed. As I see that nothing has changed, what do I do?

  Have you tried to Turn Off router/wireless?

  I hope this helps.