Recommendations or best practices around change of the audio data on a network share?

Similar Questions

• Recommendations or best practices configuration Oracle HTTP Server Oracle Webcenter 11g Portal

  Hello everyone.

  I'm looking for recommendations or best practices configuration Oracle HTTP Server Oracle Webcenter 11 g Portal

  I appreciate if you could give me some references and/or experiences.

  Thank you very much in advance.

  Best regards.

  Configurations may vary depends on place on your needs, in general you can see Configuration high availability for the Web - 11 g Release 1 (11.1.1) layer components

  Use the configuration WebTier documents to the address above if it is sufficient for your needs.

• What is the best way or best practices for access to the session defined in servelt pipeline component?

  Hi Experts,

  What is the best way or best practices for access to the session defined in servelt pipeline component?

  Please, share your ideas.

  Thank you

  ankV

  As performance is concerned, a lot would depend on as to how your design & logic is implemented and you presented search operations to support the specific performance problems. In fact the operation itself can be not expensive than in-house it is somewhat like a search for key/value of the objects in session/application context name. But having said that, Yes, a potential performance problem could be because it's a synchronized operation. So to avoid searches to be performed during each request, caching the results of a search of a component. And in the majority of cases to solve a 'A' component within your component, you must configure a property reference 'A' in the file properties for your component.

• What best practices to remove a host server data store without emptying the contents of the data store

  Hi all

  This question was probably asked a million times. the best practice to remove a host server data store without emptying the contents of the data store?

  I have two clusters and I moved host group A to group B. host A is now to see data from Cluster Both A store and Group B datastore. We want that host A to store data in Cluster B. The Cluster a data store is not and can not be empty coz VM A Cluster using data warehouses. So I just unpreset the data LUN to host A store and Reanalyze the data store? Or there is a better way to do it?

  Thank you all

  Yes that's what I meant - should have specified where virtual machines are running.

• to access the audio data

  Hello!

  I want to detect the events in the audio and take some action defined for example one keyframe to another article.

  Specifically, I'm trying to count the number of vertices (as you would see at a glance Slate) in a period of time and get this as a numerical value that I can use in other calculations.

  There may be more such an event by video image however if ideally I need real audio sample data access.

  Is it possible to get the audio data as an array of values?

  It is not so difficult to find a leading edge on a certain amplitude and count that as an 'event', if you have the data.

  I can't find anything on audio in the script guide, unless an AVItem has audio or isEnabled.

  Alternatively, if this option is available in the Premier or hearing I'm happy to work there but they do not seem to support scripting at all!

  Anyone?

  Thank you!

  + Leo

  If you need to get down to the detail of sample auto, I think that you will need to go on the road to plugin. None of the plugins I've written have involved audio samples, but that the data may not be accessible after the SDK. Maybe this should be your next step.

  Dan

• Error "could not get the audio data in the file.

  Hello

  I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

  I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

  Where can it be?

  Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

  I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.

• (Best practices) How to store the adjustment curve values?

  I got two sets of data, Xreal and Xobserved, abbreviated Xr and Xo. Xreal is a data set that contains the values of sensor from a reliable source (it's a pain to collect data for), and Xobserved is a set of data containing the values from a less reliable source, but much less maintenance, sensor. I'll create a VI that receives the entry of these two sources of data, stores it in a database (text file or csv) and crosses some estimators of this database. The output of the VI will be best approximation of linear adjustment (using regression, not the Xreal) of the input value of Xobserved.

  What are best practices for storage Xreal and Xobserved? In addition, I'm not too known using best VI made, take CSV files for entry? How would format it best?

  '

  Keep things simple.  Convert the table to CSV file and write to a text file.  See attached example.

• Best practices deployment CD to the internet non-connected PC

  Hello

  Are there things or best practices to be careful during the deployment of CD player on the internet non-connected PC? We currently use drive X, which we are patching regularly via a field startup script. Specifically, I want to know:

  (1) CD player can be deployed in the same way that we currently do for Reader X (i.e. first install the base of the file through msiexec.exe /i package in a startup script, and then install the latest hotfix files using msiexec /p also using a startup script)

  (2) CD player does require authentication via internet, or can that be disabled via Adobe Customization Wizard or group policy?

  (3) can I disable all related and all features which requires an internet connection via Adobe Customization Wizard or group policy for clouds?

  (4) at - it nothing another important to know?

  Thank you.

  Here are answers to your questions:

  (1) CD player can be deployed the same way we do it currently for Reader X (i.e. first install the basic package of the file through msiexec.exe /i in a startup script, and then install the latest hotfix using msiexec /p also using a startup script) - Yes, CD player can be deployed in the same way as the X drive. There is no difference.

  (2) CD player does require authentication via internet, or can that be disabled via Adobe Customization Wizard or group policy?  -No, only DC Acrobat requires it. However, CD player, is free and requires no all identifications.

  (3) can I disable all related and all features which requires an internet connection via Adobe Customization Wizard or group policy for clouds? -Yes, you can disable all cloud related features through the Customization Wizard or group policy

  Ben above mentioned, you must always keep your reader to update to the latest version which has the latest security related bugs.

  I hope that I have answered all your questions, and it helps. If you have any question, please report.

  Thank you

  Vinod

• Best practices for moving to the 1 of 2 VMDK to different data store

  I have several virtual machines who commit a good amount of data on a daily basis.  These virtual machines have two VMDK; one where the operating system and that where data is committed to.  Virtual machines are currently configured to store in the same data store.  There is a growing need to increase the size of the VMDK where data are stored, and so I would like these put special in a separate data store.  What is the best practice to take an existing virtual computer and moving just a VMDK in another data store?

  If you want to split the vmdks (HDDs) on separate data warehouses, just use Storage vMotion and the "Advanced" option

• best practices or framework for the design of OSB(11g) process

  Hi all
  
  We worked in oracle 10g, now in the new project we will use Soa suite 11 g. For 10g, we have designed our services very similar to the framework of AIA. But since the introduction of OSB 11 g we are not able to exactly fit the frame of the here AIA because the BSO has a different structure of the BSE.
  
  Can anyone suggest some design framework for the design of processes in OSB or 11g SOA Suite or best practices?

  http://download.Oracle.com/docs/CD/E12839_01/integration.1111/e10223/04_osb.htm

  http://www.Oracle.com/technology/products/integration/service-bus/index.html

  Kind regards
  Anuj

• Best practices Check - Configuration of the Communication Service

  So, we have the following here the use case...

  Background:

  We have a FMS instance that has several teams using multiple applications, air conditioned and have their own specific communication needs. Teams of infrastructure, such as the database or Server team are also included on this FMS. We have services configured around applications and their dependencies, so a single object will exist in several services.

  To work around the lack of granularity configuration and horrible the service-based E-mail in the form, I created an event rule that queries for FSMServices affected for a given event and iterates over all the unique services, pulling on the notification settings through our way of soil and trigger Actions from the command line or appropriate accordingly EmailActions... we use of the-d in the field of shortDesc service options.

  Example:

  

  (You can ask for a detailed explanation of what do the settings, if you wish, or that the levels called - but they are just an additive representation of the levels of severity in foglight)

  Here's our new problem:

  We have teams who want notification on certain rules of certain severities (such as criticism), but not others. This has created the need for a 'white list' or the 'black list' of the original names of rule for the event to determine whether an event should be communicated to our NOC or paged on our teams.

  My solution of thought:

  
  

  We will create a new cartridge (FoglightCommunication) that contains a custom dashboard and the definition of the topology for a FSMServiceConfig object. This object contains a white list or black list for some rules should be provided for each service. This TopologyObject would also resume functionality which serve as my current shortDesc variables... Essentially, it would contain all THE information relevant to its corresponding FSMService object configuration. We have experience in creating modules advanced both in the creation of Foglight cartridge/agents/topology definitions.

  The dashboard would exist to facilitate the configuration of this new object and to facilitate the visualization of the current communication service. This would also allow our team to allow the teams less educated with Foglight feature more easily and completely configure their own communication service. Empowering the team owner is always a good thing

  My Question:

  Did someone in the quest (it's such a name cooler than Dell) sees a problem with this? My only concern is that we could lose all our configuration information to uninstall the cartridge for a upgrade problem. He might consider a work around with an option to export/import... but it's a messy solution and a non-human evidence. Is there a way to specify the data to be persisted, even if the cartridge that has defined this topology definition is uninstalled?

  I'd appreciate any comments or thoughts. Thank you!

  Hi Adam.

  This looks like a very useful customization. I don't see why your team should not move forward with that.

  I also like the idea of building an import/export feature in your cartridge in order to preserve the configurations in case you need to uninstall the cartridge. Note that even in this case, type of custom topology that was written to the repository data Foglight will always be there (i.e. it will not be served unless you specifically request this) - so you can be able to get Foglight to save the configuration information important for you.

  I encourage you to update the community on your progress on this and send questions, screencaps, etc., as needed.

  Thank you!

  Robert Statsinger

• Best practices for installation of the equipment of the unit

  Is it possible to use the CD of hardware for installation with the unit while I'm using the correct equipment. Or is it recommended to install from scratch and apply the updates of security on the Unity software page.

  Thank you

  Tim

  I think that you are writing about Hardware configuration CD of the CallManager. If you are, then this is a NO-NO.

  You need the disks of the Platform Configuration that is provided with the server if you have purchased the license for the windows 2000 Server.

  So, if you don't have the disks in the Configuration of the platform, you can download the driver from HP hard drive controller and install Windows manually. Install SP4, IE6 Sp1 and you can use automatic Windows Update If you follow this guide:

  Support policy for the automatic update of Windows

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_pre_installation_guide09186a008020a63e.html#wp64185

• HP laptop: laptop has changed before the purchase date files

  Hi everyone, just wanted to just share an event that seemed strange and need to know if this is normal or not.

  I bought a new HP Notebook 2 days.  Today, I looked in the folder Temp of the laptop and discovered many files were changed in January, months before my purchase.  In addition, stange is that many files were changed during the night or very late at night, with time between 20:00 and 01:00.

  Is this normal or plant associated with?

  I'm sure it's related to the original installation/configuration. I saw these files in several machines I have.

• Audio selection in auto Cs5.5 still plays rather then change just the audio track

  I'm a newbie even after moving to DVD SP in yet for the creation of menu blu ray. Ive read and re-read the help files and they seem to be the same for the versions still dating back at least to cs3 for that matter... so I do something wrong or still just simply do not do a very basic thing...

  I'm building a blu - ray with a video of singel track and 2 audio player. I am trying to bind a menu to allow a user to select a 5.1 or 2ch audio version for a feature film. Everything should be simple. I have a menu with several buttons. Each links button on an audio track in my calendar.

  However, when I test my links, instead of simply changing the audio and return to the menu (according to the instructions in the help files), the movie plays from the beginning.

  The correct audio track is played, but it is not my intention, at that time there. I want the user to choose the audio track and then allow the user to press another key play or to another menu and back before the movie starts.

  So, how do just change the audio track but he not play there?

  Aid says use "indicate relationship" so I choose this option and select the timeline, Yes, select the track audio 1 or 2, Yes. But are there any different way to do it if I really wanted to play the track at this time as well. What is the fundemental bit I'm missing here? Something to do with the type of button or a werid overide setting I'm missing? Can still actually do this? its quite frustrating seen arising from the use of SP of DVD, which allows any script, set gprm/sprm registers in a program that does not allow you to do anything beyond creating very very basic.

  Any help would be appreciated. Thank you.

  brand

  maniac101maniac wrote:

  However, when I test my links, instead of simply changing the audio and return to the menu (according to the instructions in the help files), the movie plays from the beginning.

  The correct audio track is played, but it is not my intention, at that time there. I want the user to choose the audio track and then allow the user to press another key play or to another menu and back before the movie starts.

  To return to the menu after changing audio or any subtitle track, you must select the menu desired in the link option specify and change the audio and subtitle accordingly.

  

  In the example above, what I did was, I went on the link specify, the menu, like target and also changed the audio track it and clicked OK

  So here, after pressing button 3 (point 3), I would like to return to the menu and my audio would be handed over to the audio 2 track.

  After that, what timeline I play, that would be played with track audio 2.

  This is just a small example to show how it's done. Define navigation as you want.

• Any way to change/replace the EXIF data such as the date of the photo?

  I import into Lightroom several thousand photos I took with my first digital camera, in 2000-2004. Everything went very smoothly. But here's my problem:

  In my old workflow, I spent the time of photo montage liquidated as TIF files, and stripped of any program that I used to edit the EXIF from them. Thus, for example, a photo that was taken on March 4, 2001 has the information EXIF showing it was taken on March 10, 2001, the date on which I edited and made the TIF. All other EXIF data is stripped as well, the data on exposure, lens information, ISO, if the flash is triggered, etc.. Basically, the TIF file seems to have no other than my name and the size of the file EXIF data.

  I can't live without the other info, really, but the change of information on the initial date/time means that the TIF file is not sort next to the original file in Lightroom, which I want to do. There are not thousands of photos that I have hair, a few hundred maximum.

  Is it possible with a plugin or an external program to copy EXIF information in the original program and insert it in the TIF file?

  To change the date to use the Edit capture time option located under library > metadata menu.