Recommendations or best practices configuration Oracle HTTP Server Oracle Webcenter 11g Portal

Similar Questions

• Model 'Oracle WebCenter Custom Portal'

  Documentation Oracle (http://docs.oracle.com/cd/E25054_01/webcenter.1111/e10148/jpsdg_deploy.htm) says that:
  Before you deploy a portal WebCenter application, you must create a WebLogic managed server, based on the "Oracle WebCenter Custom Portal" template that contains all necessary shared libraries and a repository of MDS.
  
  &
  
  Oracle does not recommend deploying WebCenter portal to all the server applications pre-configured three managed created during installation, or to a server of domain Administration.
  
  Have you seen model "Oracle WebCenter Custom Portal" when creating a domain? I don't see.
  Managed server do you propose to deploy Portal webcenter applications?
  
  Thank you.

  Just follow the advice in the following sentence: for instructions on how to create a new managed server, see "Extending from an existing domain" in the Guide of installing Oracle Fusion Middleware for Oracle WebCenter.

  It leads to: http://docs.oracle.com/cd/E21764_01/install.1111/e12001/config.htm#BABBHCGA which gives my humble opinion all the necessary details.

• Oracle Webcenter 11g R8 recognition forms

  Hello friends,

  Can we install the recognition of forms Oracle Webcenter 11g R8 Windows Server 2012?

  According to my knowledge we can install on Windows 2008 R2.

  I went through the matrix of certification but cannot find my answer.

  -Thank you,

  Prashant.

  Hi Prashant,

  WebCenter 11.1.1.8.0 pattern recognition is not certified against Windows 2012. The operating system that is certified only for this version are Windows Server 2008 R2 and Windows 7.

  NIC

• NTFS file cluster best practice deployment of Windows server on vSphere 5.1?

  What are best practices, VMware or Microsoft that I need to know to make sure the server that I created 2 x Windows Server 2008 SP2 Enterprise MSCS of NTFS file (active / passive Cluster) can operate reliably to be accessed by more than 1,000 people?

  The underlying data disk is RDM because I need to replicate the LUNS in the DR site using the tool table of SANCopy.

  • SCSI controller LSI Logic SAS in Paravirtual changed

  Not really an option... This is not supported by VMware in an MSCS configuration...

  / Rubeck

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• Recommendations or best practices around change of the audio data on a network share?

  I have several users editing audio located on the same network share. They are always complaining about the performance.  Is it a best practice to edit audio located on the network?  I see so many issues (latency time, possible corruption, etc.) with that from the computer SCIENCE point of view, but I would like the opinion of those more familiar with the application and its best practices.  Thanks in advance.

  It's crazy! So that any audio to be edited with any degree of speed and security, it must be downloaded to a local computer, edited on that, and then the final result re-recorded on the network.

  You might as well do this anyway - at the time wherever you make a change, you store a local version of the file temp on the editing machine, and it has real save, or save as who turned to the network drive. Also, you would be working on a copy, the original is still available in the case of the vis - is up, and would not be the case if you edit the original files directly on the network, so it is intrinsically safer.

• Best practices of Oracle procedure

  Hi all! I'm a SQL Server DBA, and I learn Oracle I intend to become an Oracle DBA for many reasons.
  
  I need the opinion of experts on something here. To give you a time frame: it is very common to use stored procedures in SQL Server to return result sets, rather than SQL ad hoc because it is handier and safer (and sometimes better performance).
  
  Can say the same for Oracle procedures, or is it totally different? I cringe at the idea of having to include ad hoc SQL in application layer instead of calling a procedure that runs the code that is stored inside the Oracle.
  
  Experts, how do you manage this? Do you have the actual SQL code in your applications? Is it true that Oracle procedures can return result sets with the sliders?
  
  Thank you for putting up with my novice questions. :)
  
  Justin

  Ok.

  To run the above procedure, you must use->

  exec Budget.usp_SpendingVsBudgetDetail(to_date('2009-04-01','YYYY-MM-DD'),to_date('2009-04-30','YYYY-MM-DD'));
  

  At the SQL prompt.

  Kind regards.

  LOULOU.

  An extra single quote was deleted...

  Published by: Satyaki_De on April 13, 2009 09:47

• Airport Extreme, Time Capsule best practices configuration

  I searched for articles showing exactly what are the settings that I would see in my Airport Extreme Time Capsule. I put in place of the years before, but more recently WIFI was slow or choked several times a day. Our internet service provider recently upgraded its network, even though they claim that any slowdown is not their problem. I made sure the Time Machine backups do not cause them selfs. The Capsule is connected via CAT5 to the modem. All devices can connect wirelessly to the network.

  Base Station name is unique. Network is not hidden. Password is super strong. Wireless security is WPA/WPA2 Personal, just in case the older devices need to connect. In the window of the wireless Options, 5 GHz network name is disabled. 2.4 and 5 GHz channels is set to automatic. Router mode network is DHCP and NAT.

  I don't know if we're even using the 5 GHz mode. I want to make sure that we are optimizing on the installer. Any help is very appreciated.

  Wireless security is WPA/WPA2 Personal

  It's bad... AC is optimized to WPA2 and you will suffer significant slow down with WPA1. Even if your TC is former model Wireless N, that customers with AC wireless cards will not work as well.

  Use an AP gradually charge for older clients N or G... almost nothing today will be limited to the WPA1 unless it is very old and very slow.

  Name of the 5 GHz network is unchecked. 2.4 and 5 GHz channels is set to automatic. Router mode network is DHCP and NAT.

  The Apple 2.4 ghz speed limit... and always have.

  You will get the wrong speed on 2.4 ghz and is therefore the only way to improve the speed force customers to 5 GHz that can usefully use it.

  Check the 5 GHz range and give it a different name for the principal name wireless... It's the only way you can force clients to use the 5 GHz.

  How old and exactly which model is the TC? The base A1xxx please if you do not know.

  Age affects things. Routers wireless for some reason any servant of quality have a service life of about 3 years... the TC is actually worse than average... being more stressed to the load of the hard drive.

  I made sure the Time Machine backups do not cause them selfs.

  You actually turn off TM? Sometimes the TM always works, even when people think it's the start.

  more recently WIFI was slow or choked several times per day

  It's what I expected with TM still working on a computer.

• Best practices for the installation of 10 GbE

  I have a new HP DL380G7 who has 4 cards on 1 G and 2 10 network interface cards.

  This will run VSphere 4.1 esxi

  I'm looking for some advice on what would be a good network for this server configuration.

  The storage will be NFS goes to a NAS Server

  I tried to create 2 vswitch one with one of the NICs embedded for the service console and the other switch was a team of the 10G env.

  Support Vmware told me that in this configuration, I had to make sure that the service console was on a different subnet from the kernel NFS or NFS traffic will try to go on the service console port.

  I tried this config but as soon as I add a Vkernel to the 2nd switch I am not out ping.

  So I thought I'd post here with what would be a best practice configuration for this server.

  In the first configuration, it is difficult to say which interface will be used for NFS traffic.  Therefore, it is not a recommended configuration.

  The second configuration must be correct.

• best practices of vCenter 4.1 SQL server 2008

  I was wondering if there is best practice documentation a SQL server 2008 vCenter 4.1 databases.  I am also looking to see if VMware provides a list of best practices SQL database maintenance or if they recommend suite Microsoft Best practice for SQL database maintenance.

  This pdf file is still topical

  http://www.VMware.com/files/PDF/vc_microsoft_sql_server.PDF

  with the KB below, you should have a good plan.

  http://KB.VMware.com/kb/1025914

  also, I suggest you run the DB instance in simple mode instead of full recovery.

• Install and configure the Apache HTTP server plug-in

  Hello
  
  I use WL10.3 in a Linux machine.
  
  I have an environment where I have one WL server in a domain which is deployed with the web application
  
  And I have another area where I have two managed servers in a cluster that is deployed with the company.
  
  Now, I want to configure Apache HTTP server to make it work as a proxy with the weblogic.
  
  In my current scenario, the proxies of one seed server req in the cluster and that is defined in a jndi.properties.
  
  Now, what should I do if I want to use the Apache
  
  I have the following questions:
  
  1 forget my env, generally how to install and configure Apache HTTP plugin?
  I see that we have already seen libproxy_61.so file in /bea/wlserver_10.3/server/plugin/linux/i686
  
  Do I need to install the patch even then as said in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
  
  2. While am adding the lines in the httpd.conf file.
  LoadModule modules/mod_wl_22.so weblogic_module
  
  If I put ibproxy_61.so instead of mod_wl_22.so in this line?
  
  3. While configuring the proxy server, balancing and session replication will be assured?
  
  4. and for my setup, as stated at the beginning, a few lines, which may be the best architecture?
  
  Your help is really appreciated.

  Hi Subh
  1 so all external requests go to the single domain server with MoreWeb app. In this scenario, you don't need any additional Proxy Apache server. Because the basic concept of the Apache Web server is to route multiple applications on a cluster of managed servers. In your case, it is a single server, you don't need any additional Web front server. Now you have these EJB on another area that is clustered. I guess you use search standard JNDI to access the EJB. So, how do you make sure that only MoreWeb app requests are load balanced to the EJB. As each subsidiary request for EJB must go to MS1 and MS2 as robin in default mode. First request to MoreWeb need access EJB of MS1. Second request for MoreWeb need access EJB MS2 etc. This means in theory, you should have an Apache Web Server before the second area something like that. You have any servlet default weblogic cluster already deployed to the second area. Otherwise use that or care of apache in etc. Then in MoreWeb App when you search the EJB, make sure that you give the address Cluster and the direct port instead of the host/port MS1 or MS2. This Web server should in turn make the round robin for EJB on second domain clustered. When you get the InitialContext object instead of using empty default constructor as new InitalContext(), you may need to use something like InitalContext (aMap) new aMap corresponding to a hash table with the properties for the provider url, etc. etc. You can see the docs for more details. Here is the link for the EJB Clustering. See the section on EJB

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103//cluster/load_balancing.html

  Hope this helps
  Ravi Jegga

• Oracle on NetApp - white paper best practices?

  I thought I saw a nice whitepaper "best practices" that Oracle published to operate the RDBMS on NetApp.
  
  But I can't seem to find now. Does anyone have a link?
  
  (I access Metalink if it is there, but my search didn't find it).
  
  Thank you!

  The doc I have comes actually from NetApp, not Oracle. It is titled: NetApp Best Practice Guidelines for Oracle

  You can find a copy here: http://media.netapp.com/documents/tr-3633.pdf

  See you soon,.
  Brian

• Spectrum X 360 (N1W02PA #UUF): best practices for the use of the power supply battery for laptop (spectrum X 360)

  Hello.

  I know the best practice to use the power supply to charge the battery? I heard that keep charging your battery while using Notepad deteriorate autonomy. I don't know if that's true, but I do not charge my spectrum X 360 at 20% power level.

  Kindly need some expert advice. Thank you.

  Hello:

  My recommendation is to follow the instructions provided in this document from HP to address... paying particular attention to the info listed according to the recommended battery care practices.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c00596784

• Oracle WebCenter content configuration

  Hi all

  I have install and configure Oracle WebCenter content 11g for development purposes, as part of it have installed the Oracle WebCenter content and also created managed servers required. Now I'm setting up Oracle WebCenter Content and I don't know if I can skip these steps and go further.

  https://docs.Oracle.com/middleware/11119/WCC/install/config.htm#INECM201

  • Article 3.8, 'Configuration of SSL for Applications Oracle WebCenter content'
  • Section 3.9, "Reassociating the storage of identification with an external LDAP authentication provider"
  • Section 3.10, "adding users in Oracle Internet Directory.
  • Article 3.11, "Configuration of Single Sign-On (SSO).
  • Section 3.12, "integrating Web Oracle WebCenter content layer".
  • Article 3.13, "Configuration of managed Server Clusters."
  • Article 3.14, "Oracle Web Services Security Configuration Manager.

  Thank you

  Moore

  Probably yes, but it really depends on what goals, your system must be used to.

  Just in case it is not obvious, I'll write a short comment to each of your points:

  Greater security - SSL - 3.8, the prevention of the man-in-the-middle sniff for content

  3.9 - external LDAP - for development, you can go with WebLogic server embedded LDAP, but it can also be convenient to use an external; especially if you take identities that are already defined in your organization

  3.10 - associated 3.9 (you need to set your users at least in one place, or all your developers will have to use the "weblogic" account)

  3.11 - SSO - for a stand-alone system possibly unnecessary, but should improve you in several systems (e.g. WebCenter portal content, or content WebCenter WebCenter + BPEL/BPM) it could could be convenient set SSO

  3.12 - WebTier - only if you want to use the features of some WebTier (e.g. Caching), or need to install the web server on a different HW as the server application (in general, behind the firewall)

  3.13 - incubators - only if you need it (perhaps not necessary for the dev TEAM, but some systems TEST should have if you too in PROD)

  3.14 - WS security - needed if the system will be accessible to other clients via WS, particularly if these clients are located behind a firewall

• Best practices for placing < meta > tags of the document HEAD

  Good afternoon

  We use the ability of Oracle UCM to dynamically generate pages based on page templates, model region and data files of contributor contributors can edit and publish. We have a specific need to include meta tags in the head section of each page that are customized for the data present in each contributor data file. Including meta tags in the model of the region that relates to a section of our site Web do not work, because it does not include a < head > section. Otherwise, I can't put metatags in the page template, since the data contained in each meta tag are specific to the metadata surrounding each contributor of the data file.

  My question is this: is there a best practice, or Oracle-taking method in charge of this task? I believe he remains the path to get there, as is a very common need for meta tags for search engines and social media sites.

  Thank you very much for your time,

  Josh

  I believe that the following should be useful:

  wcmElement

  ssGetDocInfo

  Jonathan

  http://jonathanhult.com