Recommended installation for the stability of the regions hot &; warm even under Safari until Mac, cooling system is innovated. For a more Durable Mac
Hello. It is best to combine a stable software (10.11.6 is stable to this day) and a cool hardware, even with Safari (with many tabs). A stable software is not enough, a cooled optimal equipment is also essential; It creates a stable holistic system.
Until Apple, miniaturize perhaps, a sort of refrigeration in the circuits themselves (coolant will be not compact) due to the warming of the planet (some countries reaching a strong history of 46 to 65 degrees Celsius), cooling fan is not viable because it is so hot that he uses room air, regardless of how fast the fans spin (which would be just like a set of dry hair to the maximum) is not enough. An already hot air will get even hotter once Macs is used for long hours that could damage the GPU in particular, or perhaps even deform boards disconnect some circuits even or deform inside fleas which includes also circuits in them. Heat can also soften the welds in the Mac.
It is recommended to run fans manually with a fan control application, even if the Mac is new (over the past six years the iMac I have had 2 replacements of GPU - this is most probably because of the heat and lack of ventilation in the Macs.) Apple may have more emphasis on function and either looks-it can't be 50-50. Replacement could cost if not for Apple Care which is good to have), if you are in an area that is warm or hot, at least 2000 rpm which seems to be a good balance between cooling and too much noise (it keeps the GPU minus 70 Celsius, especially). At 2000 rpm, the wear on the fans is not the only striking, it's usually only 47% of the maximum rpm of Apple fans (good fans are usually evaluated during maximum 5 years running 24/7 all year). But the best is to turn off all the gadgets to make noise to make the quiet place and adjust the fans (with a minimum of 2000 RPM) as quickly as possible without being noisy for the user. It is better to add extra cooling in the back (like a small electric fan or fans of cooling for laptops) for maximum stability if you're not in a cold air-conditioned room.
It is good to reset PRAM then MSC after the fans and password recovery to use disk utility (two types of repair) manually before booting into your main operating system.
God bless you. Revelation 21:4
Directly from the plug of the iMac:
Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)
If you try to work beyond these limits, good luck!
There's this thing called 'air conditioners' cool the environment.
Tags: Mac
Similar Questions
-
Get the error during the installation of the regional coordination unit
Hello
I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
Thanks in advance...
2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
Please enter the name of user and password valid
2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
Please enter the name of user and password valid
at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
in java.awt.EventQueue$ 1.run(EventQueue.java:602)
in java.awt.EventQueue$ 1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged (Native Method)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)3rd error is known, one can ignore it.
Try it with the user of the system, I thought I told you that.
This should work.Score pls help if
-
installation of the regional coordination unit
Hi experts,
I use a tool to administration of BI (Client Installation) on 32-bit computer
If I try to open the RPD in online mode, then he said: not able to connect to the Server BI instance.
I'm trying to connect to the server of BI on the other 64-bit machine
I'm going to install the weblogic Server
If Yes? then
1 should. what version I
2. do I need to create a separate RCU schema for this.
If not then what steps I will follow
see you soon
AnkitAnkit Gupta says:
I'm going to install the weblogic ServerN °
I can assure you that you can certainly connect using the tool of administration of a BI 11 g client install on a 32-bit Windows machine to a BI 11 g RPD on a 64-bit BI server online (my server is RHEL 5). You have not need a client-side install of WLS. You need not any schema RCU more. However, you must create an ODBC connection to your customer. Start Run odbcad32 - then create a system DSN. Even on a single node installation the port will be the port cluster (8706) not the bi port server (8703). Click on test to test the ODBC connection. Success?
-
I tried to install an application Installation created by Labveiw 8.2.1 on Win XP machine to an another ATE running on Windows 2000. But it has not been possible. The error message is attached. Can someone explain to me how do I solve this problem? Help you enjoy.
Well, what you defined in the Advanced page?
-
The buttons are clickable, even under an object
I have a layer of buttons and then on top, I have this overlay that fades on sometimes. While this layering is there underneath all the buttons are still clickable and always the cursor turns into a hand. How can I make the buttons not clickable when there is an object on top of it?
the overlay is on a higher layer by layer of buttons and is not transparent.
You can assign their false _visible property or their property enabled to false.
-
LR4 RC2 is necessary after installation of the LR 4.1?
LR4 RC2 is necessary after installation of the LR 4.1?
N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.
-
I volunteer for installation of the Government in New Orleans. I'm helping recommendations on equipment and software. Their editing computer cannot be connected to the Internet. How to buy and receive the software and updates?
Please see this link in the topic "successful."
Creative cloud using Enterprise | Applications and updates
You can use managed delivery of applications for the following:
- If you need to exercise strict control over the applications installed on client computers.
- If end-users have administrator privileges on the computer.
- To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
- If there is no Internet access on client computers.
-
Update service NOR recommend to install the patch f5 for the 2012 LabVIEW runtime engine. However, I have LabVIEW 2013 currently running on this computer and never had installed LabVIEW 2012.
Is this expected behavior and it is actually recommended to install this update?
Hi mest,.
Details of the full patch for f5 patch are available in this knowledge base article. As a general statement, we encourage everyone to install the patches as soon as they are available through the Update Service, especially if they are marked as Urgent (it is not marked urgent). In this particular case, it is unlikely that you'll turn to all the problems solved by the f5 2012 SP1 hotfix since you use LabVIEW 2013.
The reason why you see the update in the update service is LabVIEW 2013 installs several versions of the runtime LabVIEW, so Update Service sees that you have on 2012 Run-Time Engine installed and invites you to patch.
Kind regards
Jeff Peacock
Product Support Engineer | LabVIEW R & D | National Instruments
-
Best practices for installation of the equipment of the unit
Is it possible to use the CD of hardware for installation with the unit while I'm using the correct equipment. Or is it recommended to install from scratch and apply the updates of security on the Unity software page.
Thank you
Tim
I think that you are writing about Hardware configuration CD of the CallManager. If you are, then this is a NO-NO.
You need the disks of the Platform Configuration that is provided with the server if you have purchased the license for the windows 2000 Server.
So, if you don't have the disks in the Configuration of the platform, you can download the driver from HP hard drive controller and install Windows manually. Install SP4, IE6 Sp1 and you can use automatic Windows Update If you follow this guide:
Support policy for the automatic update of Windows
-
Variable setting wrong with dynamic action for the region of report
Hello
I can't setting a variable. Here are the details of connection:
Connection information:
TCARMY workspace
User Apex_dev
Password dev_apex
Application 88542
Page 11
If you run the page 11 and just click on submit, there will be two rows. If you click on one, the modal region won't say no data found. If you click on the button submit once again, the value is passed if you click on it now, the results arrive. If you click on the second row, it still shows the value of the first row. If you click on submit again after clicking on the second line, then it is displayed correctly. It seems that the value is set to submit it. I want this to work when clicked, and then for the sql to run with the value that is in this variable when clicks on the element. There is a bit of javascript page level and dynamic action. Something is not right to the installation.
The modal window should popup and run the sql at that time with the variable data and view the two columns. And if the user clicks on the second row, it would display the data in the row.
Thank youTim
TC-army wrote:
If you run the page 11 and just click on submit, there will be two rows. If you click on one, the modal region won't say no data found. If you click on the button submit once again, the value is passed if you click on it now, the results arrive. If you click on the second row, it still shows the value of the first row. If you click on submit again after clicking on the second line, then it is displayed correctly. It seems that the value is set to submit it. I want this to work when clicked, and then for the sql to run with the value that is in this variable when clicks on the element. There is a bit of javascript page level and dynamic action. Something is not right to the installation.
What has not been set up right, it's that the element of P11_NAICNUMD parameter was not specified in the source attribute of Page to go to the region, modal Discount. The current value in the browser page, therefore, was not defined in session state when the report has been updated by the dynamic action. When
-
Two questions on ASM for the Installation of the grid
Version of grid Infrastructure: 11.2.0.3
Platform: Oracle Enterprise Linux 5.6
Question1.
Oracle: dba will own our grid software (not network user). What should be the permission set for the LUN (/ dev/sda1,..) before the installation of the grid?
Question2.
Currently shared LUNS appear in the form
/ dev/sdb.
/ dev/sdc.
/ dev/sdd
is a single partition must be created before LUNS to ASM?
For example, I should choose p (primary partition) below. Right?
# fdisk/dev/sdb
Device contains a table of the MS-DOS partitions, valid Sun, SGI, or OSF disklabel
The construction of a new partitioning BACK with disc 0x8b157fd2 identifier.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content is not recoverable.
WARNING: invalid indicator 0 x 0000 partition table 4 will be corrected by w (rite)
WARNING: The DOS compatible mode is discouraged. It is strongly recommended to
off mode (command 'c') and change the display units to
sectors (command 'u').
Command (m for help): c
Indicator of compatibility BACK is not defined
Command (m for help): u
Change of units of display/entry to the sectors
Command (m for help): n
Control action
extended e
p primary partition (1 - 4).
Check step 5 here. You use oracleasm utility that changes the permission.
Infrastructure of network for a stand-alone server installation
Ta
JAG
-
Re: recommended size for the E-Business Suite.
Hello
Is there a recommended for ASM in GR 11, 2 rack unit Allocation size?
In Oracle 11 g grid 2, AU (Allocation unit) can now be specified as an attribute of ASM Diskgroup. Is there a recommended size for E-Business Suite for what UA value should be fixed?
Kind regards.Salvation;
In Oracle 11 g grid 2, AU (Allocation unit) can now be specified as an attribute of ASM Diskgroup. Is there a recommended size for E-Business Suite for what UA value should be fixed?
As far as I KNOW no, but you can use the network installation guide and can use recomentation specified for the ASM Diskgroup to EBS attribute also
Respect of
HELIOS -
Hello
I'm kinda new to OA framework and to try to run the Test Page form Jdeveloper himself. I do a query of xxPersonMainPG and press the 'GO' button update the record, I navigate to managePersonPG. Here on this page when I update the record and press the button "Commit Data", I got the following error message:
Details of the exception.
oracle.apps.fnd.framework.OAException: no data found for the region (/ oracle/apps/ak/xxPerson/webui/xxPersonMainPG).
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:527)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3718)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3451)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:999)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
in OA. jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
in OA. jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
# # 0 in detail
Exception:
oracle.adf.mds.MetadataDefException: unable to find the component with an absolute reference =
/ Oracle/Apps/AK/xxPerson/WebUI/xxPersonMainPG, XML Path =
C:\JDevloper\jdevhome\jdev\myclasses\JRADXML; C:\JDevloper\jdevhome\jdev\myprojects; C:\JDevloper\jdevbin\jdev\oamdsxml\fwk.
Please check that the reference is valid and the definition of the component exists on the file system or in the MDS
Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:501)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3718)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3451)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:999)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
in OA. jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
in OA. jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
Exception:
oracle.adf.mds.MetadataDefException: unable to find the component with an absolute reference =
/ Oracle/Apps/AK/xxPerson/WebUI/xxPersonMainPG, XML Path =
C:\JDevloper\jdevhome\jdev\myclasses\JRADXML; C:\JDevloper\jdevhome\jdev\myprojects; C:\JDevloper\jdevbin\jdev\oamdsxml\fwk.
Please check that the reference is valid and the definition of the component exists on the file system or in the MDS
Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:501)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3718)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3451)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:999)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
in OA. jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
in OA. jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
Could someone please help me out what why this error is coming?
Please let me know if any installation do I have to do. Also let me know if any of the steps that I missed.
Thank you
RaviCheck this xxt.oracle.apps.ak.xxperson. * webui.webui * .managePersonCO, twice "webui", on the Page or somewhere, you gave this bad reference. It should be "xxt.oracle.apps.ak.xxperson.webui.managePersonCO".
Thank you
-
record of the recommendations related to the material for music
Can anyone recommend a minimum set of basic upward to record music with Garageband? I expect to play piano and singing, or playing guitar and singing. It is at the same time, then you can expect to need two microphones. I want to talk about a big baby and an acoustic guitar, no midi or microphones. Already, I have the Macbook, the piano and the guitar, but assume that I have nothing else. Should what microphone I expect? What other equipment? Don't forget, I'm the research base and a minimum. Thank you!
Hello EmeraldIbex,
Thanks for your question. I think that music is one of the coolest things you can do on a Mac! I'll include some products from our Web site to help you get started. Products such as The Apogee One will give the microphone and line input jacks you need to record instruments. Microphones such as the Shure SM58 will provide you with exceptional quality for your voice. A visit to your store studio or recording local music will help you decide which is the best techniques of micro and placement for your big baby recording. Here are a few sections of the GarageBand User Guide that explain how to record vocals, instruments, and several tracks on your Mac.
The user guide for GarageBand
Record sound from a microphone or an electric instrument
EmeraldIbex, we have a lot of wonderfully creative Members here on our GarageBand and Logic Pro X communities who are ready to share their expertise, so I'm sure they will chime in with more suggestions and answer your questions about your musical journey.
Good luck!
-
Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free
Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.
I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
I have three options.
1. install a new drive.
2 use an external hard drive
Firmware 3.The latest is the one I prefer.
Can someone help me.Hello
Sorry, but the firmware update will not remove the DVD region lock.
The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
Unfortunately, there is nothing to see!If you wish, you can consult this announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828
Maybe you are looking for
-
How to make the font for the object / / to / date of the largest please?
Don't see too well, even on my 24 inch display. Where is the command for policies that say inbox, and on the left and then subject/date etc. All the info actually?
-
An annoying pop up called Manager apps keep appearing, nothing to do with you?
Using Win7 Pro and Firefox 20.0.1. Get an "App Manager" application from suggesting that I have download three things to let me download some sites including Twatter.I did not want to use the apps, but cannot fing anything in professing be administra
-
Satellite U200: Home WXP - installation of the other language
I saw a good deal on a Toshiba Satellite U200 and want to buy, only problem is the Windows XP Home comes with, it is in French, and I want an English... OK, I have one English here, so I can activate it, but I was wondering if I can just install the
-
Impossible to install El Capitan Mediakit does not enough space on the device
Impossible to install El Capitan - dialog says: MediaKit does not have enough space on the device for the requested operation. I have a 250 GB with 53,99 GB available HD. Has anyone else had this problem?
-
Cursor is at the beginning of the name (artist/album) as I type
When I try to create or change a name of artist or album (or any information that uses the AutoComplete feature) the cursor back at the beginning of the word he reached the first step word which is not already recognized as belonging to the library.