Reconfiguration EPrint

Hi all

I hope someone can help me. I have a HP Laserjet Pro 1415FNW MFP. I brought this printer about two years ago. Well, during the installation I installation eprint with personalized email printer so I can remember it. (for example: [email protected])

There are a few months I had a problem with the printer and had to reset the printer to factory settings so I could reconnect it to my network. Meanwhile, I noticed that my eprint request changed the printer code. I have no worry at the time because eprint is not something I use on a daily basis.

Well, tonight, I need to reconfigure the eprint. When I went to the eprint site and logged in, the site told me that the Web site service is now called connected HP. The website automactilly has transferred my acct on connected HP eprint but my printer was not on my account more. I assumed it was because I had to factory reset the months of the printer before and it gave me a new claim code.

Well, long story short, I reconnected it my printer HP laserjet on the new HP Connect site under my account. When I tried custom back to the old custom, e-mail address e-mail address site told me that the email address was used aready. Anyone know how I could get this easy to remember address eprint?

Hi there, unfortunately it is not currently possible to reuse a custom ePrint address once a new claim code was generated for the printer.

Best.

Tags: HP Printers

Similar Questions

  • ePrint Setup could not connect to the network

    I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

    Hello

    First, I put a static DNS on the built-in web server (EWS). To do this:

    1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
    2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
    3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
    4. Power cycle then the printer and it should then connect to web services

    As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

    To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

  • Impossible to activate the services web ePrint for Color LaserJet M551

    Hello

    I read all the posts in this forum about the web services enabling ePrint to the question and tried all suggestions with no luck.

    Here's the situation:

    1. The printer works fine on place. I can print without problem.
    2. The printer is connected.
    3. All my router ports are open for outbound connections, including UDP.
    4. Communication using log in my router I can see that the printer can resolve DNS names using either my ISP DNS server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows ' registration-pro - site1print.houston.hp.com "Decides to 15.240.60.111 and" registration-pro - site2print.houston.hp.com "Decides to 15.201.224.79.
      This indicates that the printer can indeed resolve the addresses. Newspapers also Awakenings that the printer communicates with the servers (connection is established and data transferred) via https (probably the web service), but always after a few minutes the clearance process is to expire.
    5. I tried this allowing the procedure since a few days my believe that the recording servers should have worked some time during this period.
    6. I'm frustrated
    7. .. .even more frustrated
    8. what I am doing wrong?
    9. Help, please!

    trying to install eprint for my new M551dn Color LaserJet and it fails with the

    Who out there having the same problem I had. HP could not help me I restore to factory settings and reconfigured everything and all of a sudden the printer managed to enable web services and print the print code.

    Good luck to you face the same problem!

    / MrQQ

  • HP LaserJet P1102w: I do not know my email address for HP EPrint

    Hello

    I have a HP Google Chromebook 14 and I try to my HP LaserJet P1102w EPrint.  I did not initially set up this printer and I need email EPrint to print.  How to find this e-mail address?

    Such an IP address is wrong and will not allow access to the content, the printer or the printer connected to the network.

    Try turning off the printer, make sure it is not located too far away from your router has HOWEVER also ensure there is no less than 1.5 to 2 meters between the printer and the router.

    Turn off the printer, once it is off restart your router by unplugging its power for 10-15 seconds.

    Once you plug in the back of the router allow it 1 to 2 minutes until all lights turns on and you are able to access internet from your chromebook.

    Only, then turn on the printer and leave it a few moments to connect until the blue light turns blue.

    Then print another check for the difference.

    If you see all these addess that starts with 169.254 once again, please specify your model of router, also make it clear if you have any other computer available (this is in order to understand our options if necessary to reconfigure the connection of the printer wireless as such can be done directly from Chrome OS)

    Please let me know the results,

    Shlomi

  • Basic for ePrint AirPrint troubleshooting

    Some of our users have temporary problems with AirPrint, ePrint and using our Web Services provided by the ePrintCenter website. There may be a number of issues which can lead to these problems, but I am giong to do my best work to try to help understand them.

    With AirPrint, you deal with just your local network. If you are having problems with AirPrint, here are the first steps you can take to correct the problem.

    1. make sure that both devices are on the same network and share the same SSID. Sometimes a single device will be connected to a network of "guest", and this will prevent the cross-communication.

    2. turn off Bluetooth. Rarely, but I've seen that happen before, Bluetooth will interfere with communication with our printers. This is because AirPrint was written to use the same Bluetooth channel. And as having two stations radio which are very close to each other, you will sometimes encounter interferences that prevent the signal.

    3 reconnect the printer to the wireless network - simply run the Wireless Setup Wizard solves many connection problems

    4 set your printer a static IP and DNS from Google (at the bottom of the screen of the configuration should read the 8.8.8.8 and 8.8.4.4). Here is a video on how to set that-

    http://www.YouTube.com/watch?v=llYNMNKJMX4

    5. after that, if you are still having the same problem I have run a network reset, so that all devices reconnect to your network and servers correctly. Firstly turn off your machine (and other devices on the network that you want to communicate with the printer [e.g. phones/tablets]), then unplug your router, after 10 seconds reconnect the router. Once the lights are all back to normal power (flashing, stable or not) the machine followed by your other devices and test print again.

    With ePrint and our printer enabled applications, sometimes it will be not able to be used temporarily. Like most networks, the cloud of HP traverse time periodic when the servers are down for maintenance, maintenance and update. These could cause temporary outages in some of connected applications as well as some of the services provided by HP.

    However, if you encounter problems in the long term with ePrint printer applications, there are a few things you can do to correct the problem

    1 reconnect the printer to the wireless network - simply run the Wireless Setup Wizard solves many connection problems

    2. give your printer a static IP and DNS from Google (at the bottom of the screen of the configuration should read the 8.8.8.8 and 8.8.4.4). Here is a video on how to set that-

    http://www.YouTube.com/watch?v=llYNMNKJMX4

    3. after that, if you are still having the same problem I have run a network reset, so that all devices reconnect to your network and servers correctly. First turn your machine off, then unplug your router, after 10 seconds reconnect the router. Once the lights are all back to normal power (flashing, stable or not) the machine on and test the connection to the server.

    4. Finally, if these measures fail, you can disable and re-enable web services. This will make you lose your custom printer e-mail address and you will remove the information from your printer to ePrintCenter origin and reconfigure the applications and services you want. However, if necessary, you can contact our free support number below (for US and Canadian customers)

    1-855-785-2777

    I hope this information is helpful to you and if you have any questions, feel free to PM me or link me to a thread on the subject.

    Spend a day here is a nice photo of a puppy and wonderful!

  • EPrint Restart

    Y at - it all the way to reconfigure the Hp Eprint Mobile App so I can re enter email Eprint or use my main address. Ive clicked the verification, but never got a Code for several days. When I get it. It has expired at the time wherever I opened my Email

    Hi Salbel53,

    Thank you for being an active member of the HP's Support Forums. I understand you when you receive the activation code for the HP ePrint application that has expired at the time when you receive it.

    To reset the application, you can restore the application data from the settings menu in the application. Once you have reset the app data, you can then enter a personal email address to have the verification code sent to that email address.

    If you continue to have problems with activating the application Mobile HP's ePrint, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

  • HP Officejet Pro 8610: Cannot print from the HP ePrint app on the Internet

    Hello

    I try to print using the HP eprint on my Android mobile application. I am able to print using the WiFi on my phone but when on the go, the app will not find the printer. The eprint service works correctly since I can print when sending an email to my address of email eprint even when I travel but the application won't work when the printer of the Internet access. The printer is connected to a cable modem, wireless. Is there a way to print through the Internet using the HP ePrint app?

    Thanks in advance

    Well after I asked a few friends with iPhones and Android devices to print over the Internet using the application, I noticed that everyone could.

    So, initially, I reset the printer to the factory setting and reconfigured it. It has resolved all the issues I've had both with built in the application to manage as well as my phone. Now I can normally use the HP ePrint app on the internet and printing.

    As a side note, I downloaded an update of the firmware to the printer and most probably caused problems, but, as says the resolved all factory reset.

    See you soon

  • Cannot add to 6500 a eprint services

    I have a 6500 a. I print the print code mobile ePrint. I connect to eprintcenter.com and try to register. He said that the code is not valid. Among the reasons are that the printer can be registered to someone else. It's possible--I got the printer some time ago and it worked so I can have registered under a different account. But I don't see what it is.

    So the instructions suggest I can generate a new code/printer email address. By disabling and re-enabling the printer and then print the code again.

    I did it. Several times. The code is still the same and never works.

    Clues?

    Hope you are doing well and welcome on the HP forum,

    To reset your printer to the factory settings to keep in mind that this will clear all your current configuration in network settings printer incluiding you will need to reconfigure.

    Press on and hold (#) and the number 3 all by plugging the power cord.

    This should return the printer to the factory settings and give you a new printer code

    Let me know if can be of any other assistance.

    Hope this helps;

    RobertoR

    And don't forget...

  • DeskJet impossible 3070 wireless printing scanning or eprint

    Hello, I'm a Mac OS 10.7 with a Deskjet 3070 b611 series [7CB640].

    I am using CABLE and

    Encryption WPA2 Personal

    I feel wireless and scanning previously, that a month or two ago I got a new router, with a SSID being different to the previous one.  I'm now trying to get printing to work with the new router.    CISCO - modem/wireless router, DPQ3925

    I've uninstalled and reinstalled the software several times.  I can print the Wi - Fi connection test and it looks good, I can print the network configuration page and it seems fine.

    When I print from my PC it it just hangs there saying 'connecting to the printer' but never actually print anything either or ends.

    "When I press the 'eprint' and he tries to set up the automatic update, I get a message that says" the printer could not connect to the internet.  I also have problems with scanning - doesn't work at all, but as fate would be the first impression if you can help I would be very grateful.  I've been playing with this for almost two days now.

    I tried a lot of things I found in the forum, when I type the ip address of the printer in the browser, it cannot connect to it.  192.168.2.245 so I can't go this way of solution for the problem of eprint.

    I have also completed the steps in the post on APple mac printing problems debugging, nothing helps.

    concerning

    Amanda

    Hi AJHHP,

    I'm sorry to hear that you ran difficulties printing to your Deskjet 3070 since installing a new modem/router.

    I've included a link to the HP wireless printing Center.  I went to the section about "replacement of your wireless router. It gives you the steps to follow when you change your router.

    HP Wireless Printing Center - replacement of your wireless router

    http://www.HP.com/global/us/en/wireless/reconfiguring-system-Help3.html

  • Cannot use my old hp eprint messages no more

    After upgrading the firmware on my HP B110a MF, I reset and reconfigured for the eprint service.

    The system now, when I'm reconfigure the eprint service, does not accept my old name of hp eprint (es. [email protected]) and asks me to choose another.

    How to use the former there?

    Thank you.

    Hello

    I'm not afraid,

    After resetting the web services no matter what address will be blocked for a period of 6 months for security reasons.

    You must choose a different address instead.

    Shlomi

  • How to reconfigure wireless network extended with several base stations

    I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

    It is very important to understand that Apple "extend a wireless network" works on signal strength.

    In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

    (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

    (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

    In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.

  • I use hp eprint and that you can not set the e-mail account. Should what settings I use for the Description, host name, Port and use SSL?

    I downloaded hp eprint app and you cannot configure e-mail account

    I suggest you ask on a forum of HP. It's nothing to do with Thunderbird, as the eprint software connects directly to your email provider that I see.

    Maybe this will help http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Cant-find-my-computer-eprint-email-address/td-p/680697.

  • Reconfiguration of Time Capsule, a disk hard only Wi - Fi

    My Airport Time Capsule has been previously configured as my main network wireless via an ethernet connection in my router Xfinity. To my new home, there is no place for the Capsule of time beside the Xfinity router so I would use the Xfinity wireless as my single router and back to use only time Capsule as a hard drive wireless for time machine and individual backups. I have it configured in Bridge mode with the wireless off, but it will not appear anywhere. How can I reconfigure it as a hard drive wireless only?

    Unfortunately, what you want to do is not possible unless you have an older version of "flat or square" of the time Capsule... et... you have a Mac with an older operating system such as Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with the AirPort for Windows utility installed on the device.

    But... even if the terms above can be met... I recommend strongly that the time Capsule does not set up as a hard drive wireless.  Apple has abandoned this option + 3 years for a good reason, namely that it is a very slow and unreliable way to backup your data.

  • How can I disable an ability to users to disable or reconfigure an addon of Firefox?

    I need to deploy Firefox but I need to configure so that my users cannot disable or reconfigure a particular module tab extension. I would like to know if I can just HIDE the extensions from the view of users, or if I can possibly gray out them entirely?

    Thank you!

    The id can be a GUID ({ec8030f7-c20a-464f-9b0e-13a3a9e97384}) or an e-mail address ([email protected]: em: id > [email protected] < / em: id >)

    Yes, you can use a program like 7-Zip to extract the contents of the XPI file and copy all of the content in the distribution\bundles folder

  • C4580 support eprint?

    I saw him from engadget that launches HP eprint. Y at - it that supports any printer? I can't find any info on this? Interested in getting a I own a C4580, will it work with eprint? Thank you.

    cheungszekeung:

    Your current printer will not support ePrint.

    You can learn more about ePrint to the HP ePrintCenter website at www.hpeprintcenter.com.  There is a link on the home page to find out more about web printers connected.

Maybe you are looking for

  • FN key does not work under Vista on a Satellite A100-192

    After the key Fn for Vista Installation do not work.HotKey Utility and other tools are installed (in recommended order), but when to start Vista displayed the error message: "could not start the HotKey Utility. All the other device works.

  • Satellite P750-02R - put on by button / stop

    My part number Satellite P750-02R PSAY3A-02R001 used to power on/off button, but will only start up by pressing the Play/Pause button on the control panel above the keyboard media. I checked the BIOS to V1.90 and done a system restore. A ran diagnost

  • Windows live mail keeps freezing

    Windows live mail keeps freezing. When I open the task manager a notice telling me it does not. This happens whenever I read the mail and may occur several times during each session. I sometimes close direct mail and reopen it to solve the problem. A

  • Mouse replacement for a Tochsmart 310. The mouse model No. MG-0856

    I can't find a replacement for my touchsmart 310 mouse. Mice without a model. MG-0856.

  • MY WINDOWS VISTA COMPUTER DOES NOT START AFTER CLOSING GAME?

    LAST NIGHT I WAS PLAYING THE GAME ON THE COMPUTER. THEN I TURNED OFF THE COMPUTER. THEN LATER WE I SWTICH IT ON AGAIN NOW IT DOES NOT START THERE FACT THAT HAPPING PLEASE SOMEONE CAN HELP ME THANKS