Reconnect to DAQPad-6070E (fw) after powerloss

I'm under Labview 8.2 with my DAQPad 6070E for continuous measurements.

This configuration is tailor-made for about a year. At least once a month, all the facilities

about, it is tested with the electric backup power for a few minutes.

The laptop runs on its battery, but after the short powerloss (when switching) the

DAQPad loses his (firewire) connection with the laptop.

In Windows XP, I see that the hardware is detected again.

However, my VI do not reconnect with the material and begins to produce

empty measures.

Simply leave the VI and it again solved the problem, but it is not

a solution for installation where sometimes I don't have access to several weeks.

How can I make my VI to reconnect to my equipment after a powerloss?

It solved! No matter if I reset the VI or invoked via a higher-level block of "invoke VI."

all this has not worked.

Now, I used the "LabVIEW Quit" block, and I run the compiled application

Since a batch file which refers to the time the tobacco cessation occurred in a text file, then

restart the application from the command line.

The batch file runs indefinitely, that's what it looks like:

off @echo

: BEGIN
Compiled_Application.exe
echo date %% time % > powerlosslog.txt
n 10 ping 127.0.0.1 > ZERO

GOTO BEGIN

Thanks for the help though!

Tags: NI Software

Similar Questions

  • HP pavilion dm4-1265dx slow to reconnect to the wireless network after Awaking of the fashion watch

    I am running Win 7 and recently my wireless connection was slow to reconnect to the router after waking from sleep.  If the pc is turned on at startup wireless is fast.  I checked all the settings and even tried to put off security for my cisco E4200, but still no luck.  I also downloaded the drivers to date and bios, but still no luck.  I even checked the power management settings.  I need to some advice or assistance on this. Thank you

    Uninstall the current driver for the Intel wireless adapter.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here and check the results.

  • Review of material ReadyNas Duo V1 2 Firmware corrupted after powerloss

    I have restored the default settings on my Duo then starts to created a volume and all by creating the volume, I got a powerloss.

    In Raidar, it seems now that my Duet is ok, but now I can't set up the Duo, that's what I see:

    Scan with Raidar:

    The thing trying to restore the default values with the paper clip button and power don't seem to have any effect, restart without hard disks is no option, does not work.

    Who can help?

    Hi feneyes,

    In addition to the mgdm you response, please try using other browsers such as Firefox or Safari to access the web-GUI of the SIN.

    Kind regards

    Rokhaya

    NETGEAR community team

  • Phone is not able to reconnect to the bluetooth device after accidentally forgetting the device.

    There are some time I accidentally "forgot" a Bluetooth of my friends when they were connected to my phone.

    Since I have never been able to get them reconnected.

    I checked that my bluetooth works. (I am able to connect to my friends phone, and my headphones are also able to connect to my friends phone)

    I read online messages from others with various other phones that have had the same problems and tried various solutions without success.

    Thank you

    If you reset the headset, and then pair them again?

  • Windows 7 will not reconnect to the network wireless after the first connection.

    Hi, we have computers portable windows 7 on a corporate domain which primarily use a desktop lan connection. We have a user based certificate that is registered automatically through Group Policy, to allow wireless access, and another group strategy that puts in place the wireless itself.

    The question we have is: LAN/WLAN switch is enabled in the BIOS.

    User can start and open a session with or without the LAN cable and wireless connections automatically connects them (if no LAN cable not inserted) wireless access point

    Once connected (if started with inserted LAN cable), when the LAN cable is removed, the wireless connection will automatically connect AP (specified by Group Policy).

    If the user then taken LAN cable back in, (after returning from meetings etc...), it connects to the wired LAN fine.

    If the user removes the LAN cable once again, (another meeting etc.) the wireless connection is not automatically connect again.

    The user can open the connections wireless at this point and manually connect to the access point.

    The opposite occurs if the user starts with no LAN cable it inserts after the start and then he removes, the wireless connection does it not connect automatically.

    "Connect automatically when this network is in range" is enabled in group policy

    IPv6 is disabled on the wireless card

    I tried to delete the contents of the Interfaces file in the program data\microsoft\WLANSvc\profiles

    WLAN/LAN switching works fine every time.

    Anyone have any ideas?

    Thank you!!

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand that you have problems with the wireless connection that isn't automatically. That this computer is connected to a domain network, I would like to advice post you your query in the TechNet Forums.

    Forums TechNet for Windows 7
    http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Hope this information helps. Feel free to write us again for other queries.

  • C309g-m do not reconnect to the network wireless after the start-up

    I have a question similar wireless as people before, however, I think that my case is different, somehow:

    1 during the initial installation, I set the wireless settings (just select the name from the list and enter the password - there are many networks around me)

    2. everything works, connection is never dropped, the printing speed

    3. then, when I turn the printer off and then later turn it on, wireless blue led lights, but there is no connection. Running wireless network Test gives in the statement: "the wireless radio does not work. Contact HP support. The network running configuration does not help again, no wireless networks are found.

    4. However, when I unplug the printer from the power while it's on (at rest), then plug back in and turn it on (I shouldn't do this, I know) - printer is connected within seconds to the configured network and everything is OK - "no problem found", said the wireless network Test

    I call HP support and they asked me in the service menu and make the semi full reset, I did. He turned me to configuration - see point a. Connected printer and was working fine until I turned it off. (I tried turning it off and on again shortly after completing installation and the printer connected correctly, however, the later, when I turned it off (but not disconnected) for a longer period of time, the question has remained.)

    Yet called HP, the guy said is directives are stop here and return the printer. I said two weeks ago, I installed new cartridges place - he said to take out them. Is it really OK for a cartridge to rest just like that, to sit on a table for a week or two without drying? I said how to store the - he said leave, they'll be fine.

    Y at - it a fix for this, because I don't want to be bothered with the printer until the point of transport service? Not one that follows would behave like this? And are there recommendations of store for the cartridges out of the printer? I feel I'm wasting a lot of ink in outgoing and re - install a new printer! I don't want to, this isn't my fault printer is defective.

    The last question is - when it makes sense to turn off and inkjet printer. I print a few pages every couple of days. I usually turn off the printer when the working day is over and then turn it back on next day (or 2nd day) when I need it again.

    I thank very you much for your help and advice!

    If they send you a replacement printer, there with her ink tanks.  You can store your current printer ink tanks and use them later you 'new' printer if you wish.  Store the nozzle in place so that they do not leak.

  • How to reconnect safely iSCSI SAN connection after new ESXi4u1 reinstall on USB?

    Hi all

    Can anyone here guide me how to add the connection to the current host of ESXi 4 iSCSI SAN?

    I think not as export the ESXi existing profile using vMA can do much because the version number is different so ESXi profile export is useless.

    Note: during the installation of 4u1 ESXi I unplug the host LAN cable.

    Thank you.

    Kind regards

    AWT

    Access to the host on the MD3000i configured?

    Cause the host will have a different IQN, you must reconfigure the access.

    André

  • Matching of the after shows to 9.3.4 update

    After the update to the new iOS, I found that lost connection icon remains lit.  My iphone shows the watch is connected and I receive occasional notifications from my phone to my watch.  The Flash applications do not work.

    Is this a problem with the new update?

    Disconnections can be normal, when the watch loses the Bluetooth connection with the matched iPhone (for example, when updating iOS) and no known Wi - Fi network is available.

    The devices should reconnect automatically a short while after become available and/or close being brought back. If they don't, keep your iPhone and close watch each other and follow these steps until they do:

    • Check that Bluetooth and Wi - Fi are activated on your iPhone:
      • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
      • For optimal performance of your watch, during the General daily wear keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.
    • Check that airplane Mode is not enabled on your watch:
      • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
      • Otherwise, it can help to activate / turn off the airplane Mode again.
    • Restart both devices, both turn off together, and then restart your iPhone first.

    If they still do not reconnect, try next disconnect and rematching your watch (choose restore backup if offered the choice):

  • Apple Watch don't pair after the recent software update

    I've just updated my software and now my iPhone and watch will not pair. Am I missing something?

    Hi Sam

    There is a difference between be unpaired and disconnection. When your watch dial a symbol of red phone with a line through it, it simply means that your Apple Watch has been disconnected from your iPhone:

    Disconnections can be normal. For example: your watch will be are disconnected from your iPhone if the devices are moved out of Bluetooth range or if your iPhone is turned off. If your watch is unable to connect to a Wi - Fi network known at the time (as a backup), it will be disconnected.

    The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

    If they do not automatically reconnect, try to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

    • Check that Bluetooth and Wi - Fi are activated on your iPhone:
      • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
    • Check that airplane Mode is not enabled on your watch:
      • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
        • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
      • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
      • Otherwise, it can help to activate / turn off the airplane Mode again.
    • Restart both devices, both turn off together, and then restart your iPhone first.

    For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

  • Do not connect Qosmio X 500-12 L last Wireless drivers after sleep

    Latest drivers Toshiba not reconnect to the router more after getting out of the waking state. I have to DISABLE the wireless adapter, re - activate to get back in. (has nothing to do with 'let windows disable this adapter to save power) in the case that someone thinks to answered that.

    Very annoying, probably a bug.

    Concerning

    Yes, I noticed the same problem on my two laptops from different manufacturers.
    I have a Win 7 64 bit OS installed as well and I think that this could be the Windows or WLan driver problem
    Because the two laptops use different maps of wireless network (Intel and Atheros) I came to the conclusion that this power has something to do with Win 7 OS.

    However, your laptop supports the right card Realtek RTL8191SE Wlan 802.11bgn?
    Have you tried the WLan driver from Realtek page?
    Try this

    I could solve my problem refreshing the IP WLan.
    I did it is the control box (back box began with cmd). Here I used the command ipconfig / renew.

    It was very annoying that so changed that the WLan IPadress of automatically assigns a static IP address of course I had to change the configuration of the router to because DHCP assigns the IP address automatically on all devices in the network.

    In my case, this seems to help also...

  • Cannot reconnect the external hard drive

    Cannot reconnect the external hard drive after moving the computer. I have a WD external hard drive and after moving computer cant use. It is used to mount drive f and now in the g drive. He keeps asking me to format the disk before it can be used, but cannot do so. I am desperate to back up my files but can; "t.Any help would be much appreciated

    Hello meatindustries,

    What operating system do we use?

    The answer to this question, we can pursue various troubleshooting methods.

    There are many third-party data recovery utilities available for free online.  You can search for these using your favorite search engine to find one that you like.

    Let us know the operating system you are using and we can go forward from there.

    Best regards

    Matthew_Ha

  • BlackBerry Smartphones error 507 & problem while reconnecting to JVM

    I bought a used Blackberry 9000 "BOLD" on the Internet and strives to update to OS 4.x for OS 5. I downloaded the Blackberry Desktop Software, saved everything to implement and tried to update. But there is no upgrade available for the current module, so I did a quick search and found that I can install the latest version via the Application Loader that needs to delete the vendor.xml file to install.

    I was upgrading the steps in the software, checked the applications, I needed and let software install upgrades for me, but unfortunately the process stuck at "reconnecting to JVM.

    After that, when I start the system, it displays ' Reload Software: 507 ", which means there is no operating system not installed in BB. I tried to reinstall either Application Loader and Blackberry Desktop Software, but every time I try it is still blocked to "Reconnect to JVM", and in some cases, the device does not start but shows the red light on the BB.

    I searched in the Internet see if there are people with the same problem, and none of them works. So I decided to post my question here.

    Here's the method I've tried:

    1. Upgrade via the Application Loader-> stuck at "reconnecting to JVM.
      -Also tried to upgrade without battery-> Stuck at "reconnecting to JVM.
    2. Upgrade via BB Desktop Software-> stuck at "reconnecting to JVM.
      -Also tried to upgrade without battery-> the same result
    3. Wipe the machine with JL_Cmdr-> "could not find the device, is connected to the computer?
    4. Wipe the machine with BBSAK-> "No device detected, press OK to continue.

    I am urged to find the solution, or should I buy a latest Internet module

    You can check the link below for the details of the error you receive.

    http://support.BlackBerry.com/kb/articleDetail?articleNumber=000002792&language=English

    To reload the software device using the Blackberry Desktop software click on the following link.

    http://support.BlackBerry.com/kb/articleDetail?articleNumber=000011320&language=English

  • after effects has been removed from the creative cloud 2015?

    2015 cloud own creative version and the aftermath is buying the option. It has been removed from the creative cloud?

    Sign the Adobe Creative cloud app and then reconnect you and then launch after effects CC 2015 app and check.

    https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    Always the same?

    1) go to C:\Windows\System32\drivers\etc and locate the file named hosts inside the folder etc.

    Copy 2) host of the file to the desktop and open the same thing with Notepad.

    Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  • Apple Watch will not pair manually or automatically

    Watch became disconnected from the phone.  Followed all the instructions to disable the twinning / re-pair.  Automatic pairing fails repeatedly.  Manual matching fails as well - the watch never displays a 6-digit code.  Has anyone seen this before / resolved for it?  Thank you.

    Hello

    For later use, it is not necessary to clear the pairing and re-pair Apple Watch when it is disconnected. If your watch becomes disconnected via Bluetooth and unable to connect to a Wi - Fi network, known at the time, it will display the icon disconnected on the dial of the Watch:

    Bluetooth disconnects occur every time that the pair iPhone is not available (as in the iOS updates or when your iPhone is out of scope). The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

    If they do not automatically reconnect instead of disconnecting your watch, rather trying to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

    • Check that Bluetooth and Wi - Fi are activated on your iPhone:
      • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
    • Check that airplane Mode is not enabled on your watch:
      • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
        • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
      • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
      • Otherwise, it can help to activate / turn off the airplane Mode again.
    • Restart both devices, both turn off together, and then restart your iPhone first.

    For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

  • Post images of the inhibition of the iPhone

    I imported 150 clips from my iPhone, started publishing and an hour or so later disconnected the iPhone. This has created the "Missing Camera" dialogue. I realized that FCPX had not finished importing clips, so I reconnected it the camera. After awhile clips showed no "Missing Camera" so I tried to publish my video on Vimeo, that's when I get the dialogue "not shareable element while it is still a reference multimedia on the camera.

    I try re-import images, nothing happens.

    I try to rebind the images (I have reuploaded the images to another folder), there is no evidence that missing.

    So now I'm stuck in limbo, Earth where I can't connect publish my video, and I can't connect to the media. Help, please!

    rollowenlock wrote:

    I try re-import images, nothing happens.

    Have you used the reimportation of order Camera.Archive?

    Russ

Maybe you are looking for

  • Support for 64-bit driver for Windows 7 for Deskjet 6540 and Colorsmart D5360

    Or 64-bit Windows 7 drivers for the Deskjet 6540 nor the Photosmart 5360 supports the maintenance function is now impossible to clean the print heads. Two of these printers worked fine when they were connected to my XP machine. At HP dumbed down thes

  • Cannot install service pack 4 Windows on Windows XP Professional Version 2002 Service Pack 2

    I have recently installed windows service pack 3 and now when I try to install service pack 4, I get this Error installing Service Pack 4: The version of windows that you are trying to install does not match the update you are trying to install My In

  • install pop3 and smtp

    do not know what they want or how and what I should type in when asking for pop3 and smtp information

  • Linksys EA4500 all just terrible!

    I've owned this router for over a year. Using this router has been the worst experience with routers ever. Let me count the ways: 1 non-existent Support Linksys is now owned by Belkin 2 Firmware updates 1 and it was awful and should be deployed 3 con

  • Problem ejecting SD cards

    I am running Windows 7 Professional with Service Pack 1 Until recently, when I've quand j' ai ejecte ejected a SD card, using the function of safe ejection is by left-clicking on it, its information and the map disappears from Windows Explorer and ev