Record and play back a cluster

Similar Questions

• record and play clicks using LabVIEW

  I want to LabVIEW to save the my mouse click and then it reads. Now, the mouse clicks are not in LabVIEW. For example I am google.com and then I click on maps, then on images and then the books. I want to labview to record and play back like a TI open google and click on the maps and images and so on. Is this possible with LabVIEW or is there another software OR who done it.

  Thanks in advance

  ; Lab

  Hey Lab.

  As mentioned above, you can do this by using the functions of the library windows. Attached you will find two screws Record cursor Position.vi will record the position of the mouse cursor. You need to change the Clicks.vi of mouse clicks to simulate in the reading order. I hope this helps.

  See you soon

  NOR-khil

• CS5 - sub commands Start Recording and play recorded command grayed out

  How can I activate "Start Recording" and "play recorded command? Please and thank you...

  Sorry to be so stupid, the feature has been removed from the latest versions of Dreamweaver. The recoding and reading refers to a macro that you can create to automate tasks within DW.

  Take a look here help Dreamweaver | Task automation

• anyone successfully recording audio mic and play back on ios?

  Hey all

  I'll have a lot of annoying problems with recording audio microphone and play on the iPhone (same app works perfectly on the desktop and android)

  has anyone of you who successfully done?

  Saar

  OK, I have some answers

  Divij Kumar, thanks for the manual, but I never had the traffic jam of your swf file since the compilation of my own project with "Deployment - Apple App Store" instead of "Quick publication for the device debugging" did the trick.

  Then, the app worked fine.

  fast publication was the problem, at least in my case

  THANK YOU ALL

  BTW, registration starts a little late on my iPhone 3 g - but it's the fault of the iOS - I checked and integrated enforcement "Dictaphone" is also end. I need in my application instant record so I have a record constant buffer and I use the buttons to score points rather than adding and removing SampleEvents listeners as we all have here.

  see you soon

• How to store events and play back them later?

  Hello
  
  I will store the events sent by the clicks of button and then play back them later. Reason for this is to help test. My plan is to have a selected scenarios that I can record and playback in the trials of the system. As automated functional tests.
  
  What I've done so far, is that I can store event objects in a table, but do not know how to "playback". I tried the dispatchEvent method and the EventDispatcher class, but without success.
  
  Another use for this would be to store all the events, a user made, incase if it manages to crash or otherwise put the system in an undesirable state, it would be easier to debug using the list of events and a possibility to put the system in a State even step by step.
  
  Joint are a few code snippets, just to make the idea more clear
  
  Any help on how to do this is highly appreciated.
  
  Thank you.

  Crazy idea: it is perhaps interesting to try to call the expedition on the object that is native to event?
  Something like event.target.dispatchEvent (event)?

• (Redirected) Alienware for recording and playing World of Warcraft

  I am considering buying an Alienware Aurora to play world of Warcraft, but I also intend to record and make the game You-Tube videos, someone at - it experience with the appearance of the recording and the Aurora? Its an expensive system and I cannot spend all that money and not being able to do what I need.

  Hi Coyoteowl,

  Please repost this in the forum of the Alienware club for faster assistance.

  http://en.community.Dell.com/Owners-Club/Alienware/

• ULaw and alaw record and play G711

  I want to be able to capture and play directly to the a - law and u - law format.  I have read several posts on how to put the reader (capture in my case) in amr and pcm mode.

  Capture of AMR and PCM is not a problem, but the correct string of capture to capture the u - law data is unknown to me.

  for the record:

  capture://audio? Encoding = PCM works, also tried something like:

  capture://audio? Encoding = PCMU (does not), also tried to replace with pcmu, ulaw, audio/x-ulaw

  capture://audio? Encoding = AMR (works)

  When I exit the capture I get supported types:

  Device supports capture Type: audio / amr
  Device supports capture Type: audio / basic
  Device supports capture Type: audio / x - gsm
  Device supports capture Type: image / jpeg

  To play, I think that I should put the x - wav player and provide good wav header, will try later, but my first concern registers directly as G711.

  I'm running on Simulator and device (BB Torch v6) which should be able to support the u-law/a-law.

  someone at - there more information on this? It is not possible or should I put the recorder in pcm mode and convert my data on the fly?

  Hi James!

  Registration is only linear PCM.  The reading can be linear, G711 uLaw and alaw for PCM.  On a BlackBerry audio/basic = audio/pcm.

  If you are interested, GSM is GSM6.10 of recording and playback, AMR's locker AMR - NB 12.2 Kb/s (unless you specify voipMode = true in your locator, but I will not go into these details, you can search the forums if you need more information on this) and any mode of AMR - NB valid for playback (only three units I know can also playback AMR - WB and AMR - WB +).

  Finally, to save some time there is code attached to this question (if you can connect, related to this thread) who has code to generate headers wav on the Blackberry platform for you.

• How to record and play Audio

  Hello

  I want a code example to learn how to record audio and play audio recorded

  Can anyone help me regarding this?

  Thank you

  Pounet

  Try this code, it works for me.

  To record the audio. Note that this code records audio in the device memory. Just change the url to save the code in the sd card.

  try {}
  Reader = Manager.createPlayer ("capture://audio?encoding=amr");
  Player.Realize ();
              
  RC = (RecordControl) player.getControl ("RecordControl");
  BT = new ByteArrayOutputStream();
  rc.setRecordStream (bt);
  FC = (FileConnection)Connector.open("file:///store/home/user/RecordedFiles/audio1.amr");
  {if (!) FC. Exists())}
  FC. Create();
  }
  OT = fc.openDataOutputStream ();
  rc.setRecordStream (ot);
  rc.startRecord ();
  Player.Start ();

  } catch (Exception e) {}
  e.printStackTrace ();
  }

  To stop and play the audio. Copy the following code,

  try {}
  RC.Commit ();
              
  data = bt.toByteArray ();
  BT. Close();
  Player.Close ();
            
              
  BI = new ByteArrayInputStream (data);
              
              
  Player = Manager.createPlayer (bi, "audio/amr");

  Player.Realize ();

  Player.Start ();

  } catch (Exception e) {}
  e.printStackTrace ();
  }

• Record and play variable a string will not copy

  I have a variable of string - serialization of an xml variable result - in a process.

  It has a length of 'unlimited '.

  When I opened the recording and playback, there is text indicating the beginning of sequenced xml:

  < node_x

  That's all that I can see.

  Unfortunately, the option 'copy value' in the menu contextual is dimmed, just at the moment where I most need!

  This is normal behavior for a scenario like this?

  Is there anyway that I can get to copy...

  Thanks in advance!

  At least try to open and close the variable perspective.

• Someone knows how to get a Walkman NWV-E475 to accept and play protected WMA with DRM audio files?

  I bought a new Walkman - NWZ-E475 a few days ago. It's my third Walkman. I use the devices to download audio books from local libraries. Older devices work fine, but the new system said that the WMA audio books cannot be played on this. I can drag and drop them on the device by using Internet Explorer, but they will not play.

  He spent about 90 minutes in support of online chat yesterday. People very nice but have not solved the problem.

  It's so boring. The Overdrive library software uses slick works as a whistle with the older Walkman (E345 and S545). What is the problem with the news, and what I can do to make it usable?

  Thanks in advance for your help.

  Hi Donna,.

  Welcome to the community of Sony!

  Trying to transfer rights WMA files digital management DRM Windows Media Player. The Walkman player only supports these files when they are transferred through the Windows Media Player software. In addition, Walkman player must be recognized as MTP device. Follow the steps on the below technical support article:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1003479

  However, we cannot guarantee the compatibility, but audiobooks checked through a Web site of the public library and transferred to the drive using their media must be compatible and play back fine. If they do not return, contact the source for more information on compatibility.

  Please indicate the only accepted such solution if you find the information useful.

  Thank you for your message.

• computer is spit back out dvd but will keep and play the game disc

  have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

  Hello

  Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ----------------

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can not play back current recording

  I recorded songs using the tape recorder in Vista and they played back fine and always do.

  When I try to save now it looks like his works, the bar moves, readers multimedia window shows all the graphics as it
  plays but no sound. ITunes won't play it either, back to the bar moves as he plays but no sound.

  All the sounds of the music and the window work fine.

  Would be grateful for the help.

  Thank you

  HP G60 laptop

  Hello

  Thanks for choosing Microsoft community.

  By the description I think to understand that there is no sound in Windows media player when you play all audio or video.

  Let me go ahead and help you solve the problem with the sounds in Windows Media player.

  I recommend you follow the steps to solve the problem:

  
  Troubleshoot audio recording

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

  For everything related to the Windows operating system, do not hesitate to come back to us and we will be happy to help you.

• no name of folder while trying to leave information against records and cluster

  Interesting to note that when running get-permission against the backrest, you get the Id of the entity but no names:

  For example: get-file returns the name and Id, the same example with get-vipermission returns:

  Get-file | get-vipermission | FL *.

  EntityId: File-group-d1

  Role: createNewVmDevice

  Main: testVM

  Spread: true

  IsGroup: false

  Then, when I specifically get-file with the name, then only she returns corresponding permission_schema, anyway to get-file | get-vipermission back

  each available record and information related permission? Why it is necessary is that, suppose you want to run against a cluster:

  Get-cluster | Get-VIPermission

  or an example of LucD as follows:

  Get-file | Get-VIPermission | Select @{N = 'Entity'; E = {(Get-View-Id $_.)} EntityId). Name}}, role, Principal, propagate, IsGroup

  Which always returns only datacenter_names and no associated file info, is this a bug or other additional measures to get this info?

  Thank you.

  You must understand that permissions inherit older feature high in the hierarchy.

  If you use my script, you will get the entity on which the permissions were actually defined.

  If you want to see by record what permissions apply (even those inherited), you can do

  Get-Datacenter | %{
       $dc = $_
       $_ | Get-Folder | %{
            $folder = $_
            $_ | Get-VIPermission | `
            Select @{N="DCname";E={$dc.Name}},@{N="FolderName";E={$folder.Name}},Role,Principal,Propagate,IsGroup
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• My Sony Handycam DCR-TRV950 flashes a yellow icon, C:31:23 and will not record or play.

  A year ago, the camera suddenly started flashing and beeps a yellow icon in the middle of the screen. C:31:23 flashes in the upper right corner above the minutes from the end. The camcorder will not record or play.

  If I remove and reseat or change the battery, and if I remove and reinsert or pass the minidisk, sometimes it'll save or play for a while before the beeps happen again.

  Sunny in Sun Valley

  Try to check the pin of pinch. Open the container of band and you can see the PIN pinch, is a small black roll about 1/4 in. wide and about 1 inch in height, see if she's down on the stem

• How to record streaming RTP of Wireshark and play using an application called Audacity

  I use dto this regularly a few years ago and used to know all the steps to get the stream RTP of Wireshark and then save to a file and then play using an application called Audacity.

  In my opinion, were the steps that I used to do:

  1 Wireshark - put in place since a file display server to display only the RTP.

  2 then in Wireshark---> statistical sub---> Show all streams---> and analyze---> then save payload as 'gross' or ' to the ' can't remember - forward / reverse / both

  3 then play the file using Audacity.

  I am clearly stating what I need.

  Now when I do the above I can not read the file with Audacity.

  Audacity says:

  Audacity did not recognize the file type. If it is not compressed, try to import using "Import Raw".

  We must continue to use them to remember the steps.

  Any help much appreciated.

  If the RTP stream uses G.711, you can directly use the audio player of wireshark:

  -in Wireshark - telephony - Voip calls

  -Select a call - then click the reader button

  -Click the Decode button

  -Select one or more streams of data and so click on Play

  

  You can also use RTP analyze tool to record audio in .au format and play with Audacity.

  If you prefer to save the file in .raw format, you can open Audacity and import the file in raw mode and specify the codic law for g.711A so or u - Law codec encoding G.711u and therefore equal to 8000 Hz sampling frequency.

  

  Kind regards.