record and play clicks using LabVIEW

I want to LabVIEW to save the my mouse click and then it reads. Now, the mouse clicks are not in LabVIEW. For example I am google.com and then I click on maps, then on images and then the books. I want to labview to record and play back like a TI open google and click on the maps and images and so on. Is this possible with LabVIEW or is there another software OR who done it.

Thanks in advance

; Lab

Hey Lab.

As mentioned above, you can do this by using the functions of the library windows. Attached you will find two screws Record cursor Position.vi will record the position of the mouse cursor. You need to change the Clicks.vi of mouse clicks to simulate in the reading order. I hope this helps.

See you soon

NOR-khil

Tags: NI Software

Similar Questions

  • CS5 - sub commands Start Recording and play recorded command grayed out

    How can I activate "Start Recording" and "play recorded command? Please and thank you...

    Sorry to be so stupid, the feature has been removed from the latest versions of Dreamweaver. The recoding and reading refers to a macro that you can create to automate tasks within DW.

    Take a look here help Dreamweaver | Task automation

  • (Redirected) Alienware for recording and playing World of Warcraft

    I am considering buying an Alienware Aurora to play world of Warcraft, but I also intend to record and make the game You-Tube videos, someone at - it experience with the appearance of the recording and the Aurora? Its an expensive system and I cannot spend all that money and not being able to do what I need.

    Hi Coyoteowl,

    Please repost this in the forum of the Alienware club for faster assistance.

    http://en.community.Dell.com/Owners-Club/Alienware/

  • ULaw and alaw record and play G711

    I want to be able to capture and play directly to the a - law and u - law format.  I have read several posts on how to put the reader (capture in my case) in amr and pcm mode.

    Capture of AMR and PCM is not a problem, but the correct string of capture to capture the u - law data is unknown to me.

    for the record:

    capture://audio? Encoding = PCM works, also tried something like:

    capture://audio? Encoding = PCMU (does not), also tried to replace with pcmu, ulaw, audio/x-ulaw

    capture://audio? Encoding = AMR (works)

    When I exit the capture I get supported types:

    Device supports capture Type: audio / amr
    Device supports capture Type: audio / basic
    Device supports capture Type: audio / x - gsm
    Device supports capture Type: image / jpeg

    To play, I think that I should put the x - wav player and provide good wav header, will try later, but my first concern registers directly as G711.

    I'm running on Simulator and device (BB Torch v6) which should be able to support the u-law/a-law.

    someone at - there more information on this? It is not possible or should I put the recorder in pcm mode and convert my data on the fly?

    Hi James!

    Registration is only linear PCM.  The reading can be linear, G711 uLaw and alaw for PCM.  On a BlackBerry audio/basic = audio/pcm.

    If you are interested, GSM is GSM6.10 of recording and playback, AMR's locker AMR - NB 12.2 Kb/s (unless you specify voipMode = true in your locator, but I will not go into these details, you can search the forums if you need more information on this) and any mode of AMR - NB valid for playback (only three units I know can also playback AMR - WB and AMR - WB +).

    Finally, to save some time there is code attached to this question (if you can connect, related to this thread) who has code to generate headers wav on the Blackberry platform for you.

  • How to record and play Audio

    Hello

    I want a code example to learn how to record audio and play audio recorded

    Can anyone help me regarding this?

    Thank you

    Pounet

    Try this code, it works for me.

    To record the audio. Note that this code records audio in the device memory. Just change the url to save the code in the sd card.

    try {}
    Reader = Manager.createPlayer ("capture://audio?encoding=amr");
    Player.Realize ();
                
    RC = (RecordControl) player.getControl ("RecordControl");
    BT = new ByteArrayOutputStream();
    rc.setRecordStream (bt);
    FC = (FileConnection)Connector.open("file:///store/home/user/RecordedFiles/audio1.amr");
    {if (!) FC. Exists())}
    FC. Create();
    }
    OT = fc.openDataOutputStream ();
    rc.setRecordStream (ot);
    rc.startRecord ();
    Player.Start ();

    } catch (Exception e) {}
    e.printStackTrace ();
    }

    To stop and play the audio. Copy the following code,

    try {}
    RC.Commit ();
                
    data = bt.toByteArray ();
    BT. Close();
    Player.Close ();
              
                
    BI = new ByteArrayInputStream (data);
                
                
    Player = Manager.createPlayer (bi, "audio/amr");

    Player.Realize ();

    Player.Start ();

    } catch (Exception e) {}
    e.printStackTrace ();
    }

  • Record and play variable a string will not copy

    I have a variable of string - serialization of an xml variable result - in a process.

    It has a length of 'unlimited '.

    When I opened the recording and playback, there is text indicating the beginning of sequenced xml:

    < node_x

    That's all that I can see.

    Unfortunately, the option 'copy value' in the menu contextual is dimmed, just at the moment where I most need!

    This is normal behavior for a scenario like this?

    Is there anyway that I can get to copy...

    Thanks in advance!

    At least try to open and close the variable perspective.

  • Record and play back a cluster

    Hello

    I am a student and I have to perform and LV application.
    I did the majority of the program, but I have a problem with the backup data.
    I use a complex cluster (dial other clusters etc.), I can save it as a binary file, but I am not able to open it and read it.
    I got together the post a simple VI to explain the composition of the cluster.

    It's maybe a stupid question, but I am a beginner with LabView, so I still have trouble understanding certain logics of LV

    Thank you for reading and perhaps help

    Ray.R wrote:

    I don't know if the things in the displayed examples would not help, because they may or may not use the clusters.

    But what the heck... If it helps, then all the better:

    We have to wait to see this link Ray

    Here is a small example of the observations of P

  • error message on plug-and-play

    all of a sudden, I get this error every time I play my games it is said that the plug-and-play service stopped working suddenly and computer will restart. How can I stop it?

    Hi Cory,.

    Note:

    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Use these steps to backup registry:

    • Press the Windows key + R to open the run
    • Type regedit, and then click OK.
    • In the registry, click file, and then select export.
    • Choose a destination for your backup folder.
    • Give the name for the backup file and click Save.

    Try the steps below to solve the problem.

    I suggest that you try to activate the Plug-and-Play service using the Windows registry.

    Try the steps below to activate the Plug-and-Play service.

    • On the desktop, press the Windows key + R to bring up the window run
    • In the run window, type "regedit" and press to enter.
    • In the Windows registry, search for the registry:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PlugPlay

    • On the right pane, you will find the value "Start".
    • Right-click Start, and then click on edit.
    • Set the value data to the 2.
  • Peripheral USB plug-and-play

    Daniel my usb device does not appear in the my computer window as a removable storage device, it appears at all, & he used to appear as a plug-and-play & I used to open and view & delete the files of this

    Hello

    Please make sure that the cable is correctly connected on both ends, if so, make sure that the device is on and the power light indicates that turned on.

    Also have you tried to plug the USB device into another USB port on the computer?  If connecting to another port works there could be a problem with this port,

    You can plug in another USB device on the same port and see if its able to read.

    No of them works, it might be a problem with the USB port, you can go to Device Manager and see if there are any problems with the USB ports if you can try to re - install the drivers.

  • How to record streaming RTP of Wireshark and play using an application called Audacity

    I use dto this regularly a few years ago and used to know all the steps to get the stream RTP of Wireshark and then save to a file and then play using an application called Audacity.

    In my opinion, were the steps that I used to do:

    1 Wireshark - put in place since a file display server to display only the RTP.

    2 then in Wireshark---> statistical sub---> Show all streams---> and analyze---> then save payload as 'gross' or ' to the ' can't remember - forward / reverse / both

    3 then play the file using Audacity.

    I am clearly stating what I need.

    Now when I do the above I can not read the file with Audacity.

    Audacity says:

    Audacity did not recognize the file type. If it is not compressed, try to import using "Import Raw".

    We must continue to use them to remember the steps.

    Any help much appreciated.

    If the RTP stream uses G.711, you can directly use the audio player of wireshark:

    -in Wireshark - telephony - Voip calls

    -Select a call - then click the reader button

    -Click the Decode button

    -Select one or more streams of data and so click on Play

    You can also use RTP analyze tool to record audio in .au format and play with Audacity.

    If you prefer to save the file in .raw format, you can open Audacity and import the file in raw mode and specify the codic law for g.711A so or u - Law codec encoding G.711u and therefore equal to 8000 Hz sampling frequency.

    Kind regards.

  • Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

    I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

    My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

    I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

    Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

    Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

    Any help on this would be appreciated.

    So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

    In addition, the addresses seem to be shifted by + 1.

    Thanks for the tip so.

  • How can I disable the mouse pad when you use a mouse plug-and-play?

    How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Original title: unable to disable my lan connection

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • I turn off my connection to the local network, it is showing message.

      It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

      Please answer soon

      You have problems with programs

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi MVTDA,

    You can try the following methods and check to see if it helps:

    Method 1:

    a. Click Start and select run, type cmd and click OK.

    b. type net stop cryptsvc and press ENTER.

    c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

    d. restart the computer.

    e. open new command prompt and Type net start cryptsvc, and press ENTER.

    Method 2:

    If the same problem persists then you can try to uninstall the network drivers and check.

    a. click the Start button. Select run, type devmgmt.msc and press OK.

    b. Select the network card and right click on it.

    c. now, select Properties.

    d. in the Properties window, on the driver tab, click Uninstall.

    e. After you have uninstalled the drivers, restart the computer.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to install and use a plug-and-play mini dvr/camera in windows xp?

    Forgive me, I have very little computer knowledge. I need step by step instructions on how to use a mini-dvr/camera "plug and play" in windows xp. How do I connect my dell d600 laptop? How to play what I recorded on it?  Thank you in advance for any help rendered.

    Hi, Fred Flintstone786,.

    ·         Have you tried to plug in the device?

    ·         The unit get recognized by the computer?

    Please see the following articles for more information on the Plug-and-Play devices:

    Overview of plug-and-Play

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_overview.mspx?mfr=true

     

    Installation overview of devices

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hardware_installing_overview.mspx?mfr=true

     

    Get the Plug and Play device driver support

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_driver_support.mspx?mfr=true

     

    To reinstall a Plug-and-Play device

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_reinstall_device.mspx?mfr=true

    Hope this information helps.

  • Problems with the computer automatically recording of surrounding sounds and play loudly on Windows 10.

    Original title: Sound

    Hey,.

    My laptop records the surrounding sounds and plays loudly and I have no idea how to turn it off.

    I hope someone can help me.

    ASUS X555L, Windows 8

    Hi Felix,.

    Thank you for your response with the current state of the question.

    I suggest you to make pregnant as default device and also keep microphone also disable.

    1. right click on the sound icon that is in the lower left corner of your screen under the system icons.

    2. Select the playback device.

    3. click on the Read tab, and then select a speaker from the list and then click set as default.

    Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

Maybe you are looking for