Record button

Similar Questions

• Toshiba Camileo x 400 record button does not work!

  Hi there guys!

  I recently bought the camera Toshiba Camileo x 400, unboxed it, took the lens, screen cover and the insulating battery then cap it charged. After that she had loaded it, I inserted the SD (16 GB SanDisk 'Ultra' 30 Mbps) and went to shoot some test videos.
  Aaaaand disappointment.

  The record button (mentioned in the manual as the "video" button) does nothing. I tried pressing it hard, I tried pressing down lightly and... Well, there is not that much more, that you can try. Anyway, I went back and looked through the manual, but it doesn't really have a very good troubleshooting section.

  After a few minutes, I thought I'd give the remote a whirl - and guess what?
  The record button on the remote control worked! The pause button of the camera works too, but for the record, I have to use the remote control. So, what's the problem?

  Should I take it back and replace it?
  Just to clarify, the camera was on the default settings.

  Thank you for the answers!

  -Joe Adams, "Jeo.
  ______________________________
  (the nickname came after one on another forum spelling mistake)

  Hello

  In my opinion, you should visit your dealer and should try another new.
  The record button should work fine, and I think it could be a mechanical problem because the buttons on the remote are working properly.

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.

• Stuck record button

  OK, it happened once more. On a shoot reality and the record button will not work... nothing. And I can't even disable the camea. The only way is to pull the battery. But then when I turned on the camera again media "recreate" lights up. Second time this has happened. The problem is when your in the milldoe of a scene and it happens, live it to the top of the scene for a while. WTF!

  
  

• My new records button has stopped working. How can I fix it? Win 7

  I run Windows 7 and my new records button has stopped working. How can I solve this problem

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Video record button blackBerry Smartphones does not work

  Version cours.148 and I saw this exact problem posted anywhere else.  When I go to the media, the video and click on the record button that I need to return to the screen of choice of media and I can't seem to start recording.  I tried all the usual things. Does anyone else have this problem?

  Thank you

  Gary

  Solution - really open up the Video Camera to the video camera icon and record from there.  It worked.

• I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?

  I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?

  You can add a save button slot for your file, but not a button Save.

• When I select edit then preference, the window is too large to be able to see the record button at the bottom to save my changes in the preferences.  How do I make the window smaller so I can't save my changes?

  When I select edit then preference, the window is too large to be able to see the record button at the bottom to save my changes in the preferences.  How do I make the window smaller so I can't save my changes?

  Your system meets the requirements of System. Dreamweaver?

  The problem can also be caused by the settings of your system as in

  

• Cannot click on the record button in premiere Pro

  Hello

  I want to create voice-over in adobe pro cc first.

  The only thing is that I can not click on the button R ('record' button) when I chose my microphone.

  The microphone works on my mac and showing in the first. But nothing happens when I click on the record button.

  I'm using a Samson q2u usb microphone. Can someone help me?

  Thank you

  .. .thank you! That was exactly the problem that has been plaguing me.

  With the help of CC first edition, the solution was:

  • Select the sequence-> add titles
  • Add a new audio track - select the Mono type

  Everything works fine then.

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• I just hit the record button on a doc I wanted to do a save as. Is it possible to recover my previous document?

  I opened a document that I had already called and saved.  Instead of creating a new document for my second project because the provision would be the same as the current paper I just saved, I just typed on the page layout, and when I finished I hit the Save button instead of Save as.  Is there a way I can recover my previous document?

  Hello Renee,.

  I suggest look at this FAQ on recent versions of the recovery files:
  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions
  It really depends on whether or not a previous version was recorded, but it can't hurt to check.

• Cannot record - stops after clicking on the record button

  Hello world

  In short, I can't save in Captivate.  Here's a breakdown of the fast workflow:

  1. open Captivate

  2. create the new project

  3. Select the size of the window of the application/custom

  4. click on 'Save' button on the top left of the application window

  Once this is done, the recording box disappears, and Captivate disappears (always running in the background).  From there, I can open Captivate in my Start menu, but it opens another request, not the original.  The only way to close it is by putting an end to the task.

  Any ideas?  I've recently updated to the latest patch and can't remember experienced this before.

  Thank you!

  Hi again

  You might try to demolish the settings file.

  Close Captivate

  Open Windows Explorer

  Navigate to the following location:

  ?:\ Documents and Settings\? \Application Data\Adobe\Adobe captivate

  ? = The drive letter

  ?? = Your logged in user name

  Delete the captivate_v40.dat file, you should see (or rename it if you are hinky on deleting files)

  Restart of Captivate

  Note that this operation may require you to adjust the Windows Explorer, so it allows you to view these files. In general, you click Tools > Folder Options > view tab and ensure hide them extensions of known file types and Hide protected operating system files options are not enabled.

  

  Once you have completed these steps and restarted Captivate, it should point out that the file is missing and cook until a new on-the-fly.

  I hope you do once Captivate starts to behave normally again. (I just wish I could do that easily with people and animals, I know and love!)

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Click on the record button

  SO, I want to do something like:
  at the push of a button to a page of oracle apex, it increments a value in a table of some. I want to record how many times the particular button has been pushed. Is it possible to do such thing, by the use of a query, or how?

  When the button is pressed, it must send the page and not to redirect the page. Then, you create a page process that is subordinate to the press of this button. The process would be something like

  Update clicks
  redirect = redirect + 1 value
  where button_name = "Page 1 Submit button";

• Visual web developer 2010 express record button is disabled

  Hi, the button "Sign up now" is disabled. What's wrong? Help, please

  

  I suspect that they key is incorrect.  Check that there is nothing missing or spaces added.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• inserting data in a table when the record button

  Hi all
  
  I have a form that displays all fields in a table. It contains an adjustment column that has the value null by default and also an indicator of adjustment which is by default set to NO.
  
  Now when the form is run the user has the option to add a value in this column adjustment and this value is stored in another table order_adjustment. Entries should be included in the adjustment table only when there is a change in the column setting and for the value that was changed
  

  create table order_adjustement
  ( 
    adjustment_id number,
    oe_line_id number,
    adjustment_cnt number,
    created_by varchar2(100),
    created_date date,
    modified_by varchar2(100),
    modified_date date
  )

  I created a procedure in my form to insert my adjustment value

  PROCEDURE p_adjustment IS
  BEGIN
    insert into order_adjustement
    ( 
      adjustment_id     ,
      oe_line_id        ,
      adjustment_cnt    ,
      created_by        ,
      created_date      
    ) 
    values 
    (
      order_adjustment_seq.nextval,
      :oe_lines.oe_line_id,
      :oe_lines.adjusted_cnt,
      user,
      sysdate
     );
    
  END;

  I used relaxation during the new item on this field of setting instance but the problem is that his spare no not not the value that I'm passing it the first time but if I change these values, so these values are stored in the table.
  
  Published by: Kevin CK on August 17, 2010 15:34

  Hello

  Kevin CK wrote:
  Entries should be included in the adjustment table only when there is a change in the column setting and for the value that was changed

  Well, I prefer to use the database, it will be more effective.
  But if you want to use forms then try using the code below in the UPDATE to the block level.

  IF (GET_ITEM_PROPERTY('adjustment_field_name',DATABASE_VALUE) != :adjustment_field_name OR
      (GET_ITEM_PROPERTY('adjustment_field_name',DATABASE_VALUE) IS NULL AND :adjustment_field_name IS NOT NULL))  THEN
       p_adjustment;  -- here procedure which will insert records...
  END IF;
  

  -Clément