Record for computer Toshiba laptop stopped working

Hello

I did a format for my camera and he got on the factory mode. Before that, I did an inscription to my pc now, after it has been formatted, it gives me this message at startup "Toshiba note book recording stopped working win will find the solution".
I don't know what to do to stop this message.
Give me a solution to stop it without affecting on registration of the product in the company of Toshiba.

If you already have registration and registration has been performed correctly, there is no reason to panic. After the installation of own recovery you will be always asked the same again and again.
Just ignore this option and use your laptop.

A question: do you see this message every time that you start your laptop?

Tags: Toshiba

Similar Questions

  • my computer vista laptop stops working

    my computer vista laptop stops working. It starts ok and allowes me to choose my user account, then it loads to the top of my page with all the desktop icons and wellcome page, then it stops working. How to solve this problem? Thank you!

    LTCRay,

    If the problem persists in Mode without fail, it is very likely that the system has been infected.
    You can take a look at the post of PA Bear on the removal of the malware on this thread:
    Remember that you may need to removed the hard drive from the system to scan for infections.
    I hope this helps!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

    My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

    Hello Bonnie,.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your laptop?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.

    This problem may occur because of corrupted device drivers or incorrect device settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check.
    Reference:
    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    If this does not help, use method 2.

    Method 2:
    Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbd

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Product key lost for my computer toshiba laptop

    I need to reload the windows vista, but I lost my product key for my computer toshiba laptop.
    Does anyone know if I can get a replacement and that I have to pay.

    Hello

    You could not lost the product key because the recovery disk is already activated.
    So you n t need any key to install the OS by using the recovery disk.

    But if you have lost the recovery disc then you can order it from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    But it s not free, you will have to pay a small fee.

  • I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

    I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

    Hello

    Please, try the suggestions mentioned here and see if they help you:

    http://www.thewindowsclub.com/failure-configuring-Windows-updates

    Hope this helps, good luck :)

  • CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get message "license for this product has stopped working... error code 150:30.

    CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get the message "a license for this product has stopped working... error code 150:30" how to re-enable programs CS4? Thank you.

    Could you please check the solutions:

    1. License for this product has stopped working error 150:30
    2. Error: "License has stopped working". Mac OS
    3. Error: "License has stopped working". Windows

    Concerning

    Stéphane

  • I bought Adobe Acrobat Pro 9.  I used it on my computer for years with no problems.  Today he gave me the following message: "license for this product has stopped working.  You cannot use this product at this time.  You need to fix the

    I bought Adobe Acrobat Pro 9.  I used it on my computer for years with no problems.  Today he gave me the following message: "license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (0)"I then uninstalled and reinstalled using the license key of my package, and I just get the same message.  I contacted customer service and they told me that they are unable to support me and directed me to the forum.  Please help as soon as POSSIBLE.

    Error: "License has stopped working". Windows

  • I get the rror message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your administrative COMPUTING

    I get this error message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (148: 3) "How can I fix it? When I reinstalled the software, I get a message that I have an invalid serial number.

    Hi John,.

    Could you please the version of Acrobat you are using, and also work on the operating system?

    To check the serial number of your product, you may return the following document.

    Quickly find your serial number

    If you are using windows you can see the following link for more information on the solution to the existing problem.

    https://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

    If you wish to contact Adobe support team, please visit the following link.

    http://helpx.Adobe.com/x-productkb/global/Service1.html

    Please click the blue button "Still need help" to connect with Adobe executives.

    Let us know how it goes. In case you need more assistance write us back.

    We would be happy to help you.

    Concerning

    Sukrit diallo

  • Someone at - it smart enough to: «host process for Windows Services has stopped working...» » ?

    I have spent a week on this problem, looking all over the internet and doubt that someone knows enough to solve this problem. I've been a software engineer for 30 years and never worked on an operating system such as buggy windows Vista (or windows)

    I got TWO errors. They may be related.

    = The first is with Windows Update

    -If you know, I tried:

    At ran windows BITS difficulty
    ran sfc/scannow (it found and fixed some iexplorer 8 _)
    has ran defrag and
    has ran chkdsk
    drivers replaced with the latest news from Toshiba
    has run hardware diagnostics - no problem

    I tried with and without firewalls and AV running.
    I don't run AVG control and malware - no problem

    Windows Update always fails.

    Machine: Vista 32 Home Premium SP2 on a Toshiba Qosmio computer laptop X 305-Q705 4 Gig Duo P7350 Intel with nvidia

    Otherwise, Windows works fine. Net access is fine using Mozilla. Even correctly downloaded files. BUT

    I get this error: windows update does NOT. It gives an error "failed", whose code is:

    0X80072EFE-2147012866 ERROR_INTERNET_CONNECTION_ABORTED

    Also, sometimes strange, windows displays an error dialog box:

    "Host process for Windows Services stopped working and was closed"

    A check with AppCrashView (wer reports) gives these data:

    Version = 1
    EventType = APPCRASH
    EventTime = 129402052692496014
    ReportType = 2
    Consent = 1
    Response.Type = 4
    SIG [0]. Name = name of the Application
    SIG [0]. Value = svchost.exe
    GIS [1]. Name = Version of the Application
    GIS [1]. Value = 6.0.6001.18000
    GIS [2]. Name = timestamp of the Application
    GIS [2]. Value = 47918b 89
    GIS [3]. Name = name of the Module fault
    GIS [3]. Value = ntdll.dll
    GIS [4]. Name = Fault Module Version
    GIS [4]. Value = 6.0.6002.18005
    GIS [5]. Name = Fault Module Timestamp
    GIS [5]. Value = 49e03821
    GIS [6]. Name = Exception Code
    GIS [6]. Value = c0000005
    GIS [7]. Name = offset of the Exception
    GIS [7]. Value = 0004714e
    DynamicSig [1]. Name = OS Version
    DynamicSig [1]. Value=6.0.6002.2.2.0.768.3
    DynamicSig [2]. Name = locale ID
    DynamicSig [2]. Value = 1033
    DynamicSig [22]. Name = additional Information 1
    DynamicSig [22]. Value = 4a3d
    DynamicSig [23]. Name = additional Information 2
    DynamicSig [23]. Value = c79c8c21b0e4702d54b9aebf158b2ec4
    DynamicSig [24]. Name = additional Information 3
    DynamicSig [24]. Value = f371
    DynamicSig [25]. Name = additional Information 4
    DynamicSig [25]. Value = 3b5338b3aed6dc4728911b2d00a3b11f
    UI[2]=C:\Windows\system32\svchost.exe
    UI [3] = host process for Services Windows has stopped working
    UI [4] = Windows can check online for a solution to the problem.
    UI [5] = check online for a solution (recommended)
    UI [6] = check for a solution later (recommended)
    UI [7] = close
    UI [8] = host process for Services Windows has stopped working and was closed
    UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
    UI [10] = & close
    FriendlyEventName = Stopped Working
    ConsentKey = APPCRASH
    AppName = host process for Windows Services
    AppPath=C:\Windows\system32\svchost.exe

    AppCrashview also shows the fault as module: ntdll.dll and once urlmon.dll

    The system event logs says:

    Application failed application svchost.exe, version 6.0.6001.18000, time stamp 0x47918b89, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception 0xc0000005, offset error 0x0004714e, process 0x7cc id code, start on time 0x01cbbafdcd8a8edc.

    = Error n ° 2

    I can work in SafeMode with networking (I'm in it now) using Firefox WITHOUT blue screens.

    Now, BOD (bluescreens) seems to be related to the use of the damndable IExplorer 8

    the crashdump gives:

    ==================================================
    Dump file: Mini012311 - 01.dmp
    Crash time: 23/01/2011 08:02:10
    Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x000000d1
    Parameter 1: 0x00000a54
    Parameter 2: 0x00000002
    Parameter 3: 0x00000000
    Parameter 4: 0x8304c49a
    Caused by the driver: iaStor.sys
    Caused by the address: iaStor.sys + 4349 a
    Description of the file: Intel Matrix Storage Manager driver - ia32
    Product name: Intel Matrix Storage Manager driver
    Company: Intel Corporation
    File version: 8.5.0.1032
    Processor: 32-bit
    Computer name:
    Full path: C:\Windows\Minidump\Mini012311-01.dmp
    Number of processors: 2
    Main version: 15
    Minor Version: 6002
    Size of the dump file: 138 424
    ==================================================

    The drivers loaded in the memory range were:

    ==================================================
    File name: iaStor.sys
    Stack address: iaStor.sys + 4349 a
    Address: 0 x 83009000
    Address: 0x830e2000
    Size: 0x000d9000
    Time stamp: 0x4883d53b
    Time warp: 2008-07-20 19:15:55
    Product name: Intel Matrix Storage Manager driver
    Description of the file: Intel Matrix Storage Manager driver - ia32
    File version: 8.5.0.1032
    Company: Intel Corporation
    Full path: C:\Windows\system32\drivers\iaStor.sys
    ==================================================

    ==================================================
    File name: ndis.sys
    Stack address: ndis.sys + ce3b5
    Address: 0 x 83201000
    Address: 0x8330c000
    Size: 0x0010b000
    Time stamp: 0x49e02080
    Channel time: 2009-04-10 23:45:52
    Product name: Microsoft® Windows® Operating System
    File description: driver NDIS 6.0 wrapper
    File version: 6.0.6002.18005 (lh_sp2rtm.090410 - 1830)
    Company: Microsoft Corporation
    Full path: C:\Windows\system32\drivers\ndis.sys
    ==================================================

    ==================================================
    File name: ntkrnlpa.exe
    Stack address: ntkrnlpa.exe + b40e0
    Address: 0x82a3f000
    Address: 0x82df8000
    Size: 0x003b9000
    Time stamp: 0x4c0e557c
    Time string: 08/06/2010 09:36:44
    Product name: Microsoft® Windows® Operating System
    File description: NT kernel & system
    File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
    Company: Microsoft Corporation
    Full path: C:\Windows\system32\ntkrnlpa.exe
    ==================================================

    Hey Joe,

    I see that you have updated your drivers.

    Have you updated your chipset for this PC drivers?

    Are you overclocking PC or running a RAID configuration?

    I suggest to remove all external devices during the diagnostic process, except the keyboard, mouse and monitor.

    If you think this error is with IE, you can try running it without Add - ons.

    Alternatively, you can try to reset the Internet Explorer settings.

    Here is some information on this process:

    http://support.Microsoft.com/kb/923737

    You can also check your profile for corruption:

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Computer Toshiba laptop turns off after 3 seconds

    I can't understand what is happening with my computer, but I hope that this information will help you. Any ideas would be greatly appreciated.

    There are 3 computers involved. One is a Toshiba laptop Satellite L300D Vista I had in December 2008 and the other two are Toshiba Satellite M110 XP portable computers that we got in December 2006 I think.

    The problem started with the Vista. It stops just one day and when I tried to turn it back on, it would show the Toshiba screen for a few seconds and then die. He was the life of the battery. Tried everything, could not, so I have restored the default computer. After it's on, I loaded my music in my external hard drive and a few days later, he crashed again. I restored it again and load my music back in, and then a few days later, he crashed again. Now when I try to restore it, it does not accept the restore disc. The hard drive flashes orange several times and the disc not spin fast enough to start doing anything.

    I decided to forget the vista computer, I had a year and a half... And started using my xp computer is a few years old. I've ONLY used to browse Craigslist (after I started using it instead of my Vista computer for a few days, after that the Vista) and not load any music in there. This computer has worked since then, but about a week after the death of my vista, my xp now has the same problem. It turns on for a while and then turns off immediately. Since they are the two Toshibas, they can use the same chargers so I would use the charger that comes with the vista or another, that I got off eBay a few years ago. Been using two wires forever and then everything suddenly this question not sure that it of a problem with the power or not, but one thing I noticed was my vista computer would make a rattling noise from inside the computer only when has been plugged in the charger from eBay, and I noticed my xp making the same sound as that connected with the charger from eBay just before you die too.

    My brother also has a toshiba satellite m110 xp laptop, and we tried a few things with the vista computer to try to make it work. A site offered to take the RAM and try to turn it on. Nothing that's happened. We took the ram from my brothers computer which works very well and put it in the vista. Nothing happened. We took the hard drive from her computer and put it in the vista and the computer DID start up (which was great cause I've not seen on in about a month) but it started up to a blue screen. Put us the hard drive in my brothers xp and the computer was working fine... For a few hours. Now the computer will not start correctly and we are trying to restore his computer but couldn't find the restore disc. Her hard drive was in my computer literally 15 seconds and his computer is now toast.

    I don't care about my laptop toshiba satellite m110 xp, but I want a solution for my toshiba laptop satellite L300D vista, and I also want to get my brothers running again because I ruined. I don't know much about computers, but my guess is that there is nothing wrong with the ram or hard drives, but something else in my vista computer that is ruining the hard drives. That still doesn't explain why my XP computer is turn off after a few seconds suddenly well. The only thing that the Vista and my XP have in common, is that they used the same power cords (which always worked fine)

    If anyone can help me out or point me in the right direction, which
    would be AMAZING! Thank you very much for your time

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    If you have problems with the Toshiba recovery media, you will need to contact Toshiba.

    It's the Toshiba recovery process.

    Each manufacturer has their own particular recovery process.

    And as it is now failing to do recovery required, they would be the best people to contact about this.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    And for XP questions:

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • When I try to reinstall Windows XP on my Toshiba laptop, it works until I reboot. Then it says nvrd32.sys not found: press any key to continue.

    original title: NVRD32. SYS ERROR

    When I try to reinstall Windows XP SP3 on my Toshiba laptop, it works until the first reboot. When I boot on CD it comes up saying nvrd32.sys is not found: press any key to continue. When I press a key it is said: the Installer failed. Press a key to restart your computer.

    So, I don't know what to do. I tried searching on google and found a set, but talk of computer that I couldn't begin to understand. Basically, what I consider somewhere or can I fix it myself? I just paid for a new disk of Windows XP SP3, so I'm not looking forward to having to pay someone to use it.

    Hello

    ·         Windows XP came preinstalled on your laptop?

    ·         If so, you have a recovery partition?

    ·         Where did you buy the disc of Windows XP SP3 for?

    nvrd32.sys file is a chipset driver and must be installed via floppy F6 during initial installation.

    Method 1: To do this, follow these steps.

    a. you can download the chipset drivers from Toshiba Web site and copy it to a floppy drive.

    b. press F6 at the start of the installation of Windows XP.

    c. follow the on-screen instructions to install the drivers for the chipset.

    Method 2: You can contact Toshiba to restore to factory on the laptop.

  • Computer Toshiba laptop under Vista is not genuine

    VISTA NOT GENUINE

    * original title - I have windows vista on my computer toshiba laptop.   all of a sudden I tells me that the vista program I have is not authentic. How to get back my original vista program? *

    How to activate Windows 7 or Vista manually (activate by phone)
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    ----------------------------  Alternatives -------------------------------------

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    ----------------------------------------------------------------------------------

    Download and run the Microsoft Genuine Advantage Diagnostic Tool:
    http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
    Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
    Post your results (copy and Paste button) in this forum: http://social.microsoft.com/Forums/en-US/genuinewindows7/threads )

    J W Stuart: http://www.pagestart.com

  • Questions: Re-installation of Photoshop CS3, problem: "a license for this product has stopped working".

    My old computer has Photoshop CS3 (and Illustrator CS3) installed.  The old computer is dead. I did a Time Machine backup from another computer of backup", who had both of these installed applications.  (2 installs is allowed).  I have records of origin for both applications.  My new Mac lacks a DVD player.  So, I downloaded two applications from Adobe.  Photoshop: I launched the installer, & Photoshop CS3 is not installed.  Then I installed the Photoshop.  When Photoshop is launched, I got the dialog box: (((a license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. ()) Adobe fails to phone support for CS3 products.

    How can I get Photoshop CS3 to work?  (And Illustrator CS3)

    Hello

    Please follow error: "License has stopped working". Mac OS

    Hope that helps!

    Kind regards

    Sheena

  • Cannot start indesign in Creative suite - license for this product has stopped working?

    I have uninstalled and disabled my creative suite 4 on my old mac and install it on my new iMac with the Mavericks, Ive updated and recorded and other programs work, but Indesign does not start...

    I get a message saying:

    License for this product has stopped working

    This product has a problem that requires that you restart your computer until you can run.

    If you continue to see this message after you restart your computer, please contact your COMPUTER administrator or Adobe support for help and mention the error code displayed at the bottom of this screen.

    Error: 5

    http://www.Adobe.com/support/

    (incase of your request, I tried to reboot)

    Any help much appreciated!

    I tried to reinstall completely and it seems to have fixed,

  • "License for this product has stopped working" - help

    I use Adobe Dreamweaver CS3 for Mac OS X. Last week my computer crashed. I now have a new hard drive, and most of my data was restored.

    However, when I try to run Dreamweaver I get a message: "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product... »

    Perhaps foolishly, I had never bypassed to the recording of Dreamweaver (despite periodic reminders), even if I use a legal copy, bought in the store with its own serial number, and I guess that's the reason why I now get this message.

    I'm not a computer whizz-kid and nervous about what to do next, as I would not lose data or parameters.

    Exactly how do we uninstall Dreamweaver? And when I reinstall I'm still currently having all my existing sites intact, as they were before?

    Any guidance would be most welcome.

    Thank you.

    Dreamweaver CS3 uses the old system of licenses, which really blows. Licensing for CS3 applications on my computer stopped working several times, and each time, it is a task to an hour to get it up and running again.

    You will need to download the licensing repair utility for your system (Windows or Macintosh).

    Delete / {boot disk Volume} / Library/Preferences/FLEXnet Publisher, via the operating system or the Terminal.

    Run the "LicenseRecoveryLauncher" script provided by Adobe. When the opportunity to work normally (entry) or remove (0), press ENTER to run normally.

    Reactivate your software.

    You will need your serial number of product very convenient.

Maybe you are looking for