Record in journal of Teststand

Similar Questions

• How to clear all stored results when executing sequence?

  I am running very long sequences. Time of execution of these sequences is from one day to two weeks. All the necessary results are stored in the file with LabView VI. So I did not need record all results in TestStand level.

  If consumption of memory sequence has become an issue. I have my sequence of debugging and discovered that the initial check 'save results' causes this problem.

  Now, I want to assure you, that results in memory are destroyed by a new stage.  "Locals.Results"-table includes containd results of current sequence, but not the results into subsequences. "."

  Where are registered all results? and how I can destroy them?

  I think you should read a bit more on the TestStand reports.

  If your custom report generation does not use the ResultList, you must check the following box in the Station Options:

  

  hope this helps,

  Norbert

• Registration of the VMWare Tools? No created log file

  Hello

  I have SuSE Linux with VMWare Tools.

  I add in the /etc/vmware-tools/tools.conf

  [record]

  Journal = true

  log.file="/var/log/VMwareTools.log".

  log. Level = Debug

  But the file does not create or write.

  What I did wrong?

  Is it a problem that the 'free' VMWareTools was insalled before?

  I would like to know why the Scripts:

  / usr/sbin/pre-freezescript and/usr/sbin/postthaw-script

  are not start if I run a snapshot

  Thank you

  You configuration in /etc/vmware-tools/tools.conf should look like this:

  [record]
  Journal = true
  vmtoolsd. Level = debug
  vmtoolsd. Handler = file

  vmtoolsd. Data = /var/log/vmtoolsd.log

  See the following article:

  Enabling debug logging for VMware Tools within a guest operating system

  With these settings, I can get logging to work in a prompt of SuSe VM.

  I would like to know why the Scripts:

  / usr/sbin/pre-freezescript and/usr/sbin/postthaw-script

  are not start if I run a snapshot

  To start the file names must be:

  usr/sbin/pre-antifreeze-script

  usr/sbin/post-thaw-script

  These files must also be executable with 0755 permissions and owner root. Make sure that it is set to script files.

  Also you can check the file vmware.log of the VM on the data store that records messages related to the VM of ESXi host point of view.

• Using the data logged in an interface with the aggragate function

  Hello
  
  I'm trying to use logged data from a source table in one of my interfaces in ODI. The problem is that one of the mappings on the columns target implies a function (sum) overall. When I run the interface, I get an error saying not "a group by expression. I checked the code and found that the columns jrn_subscriber, jrn_flag, and jrn_date are included in the select statement, but not in the group by statement (the statement group contains only remiaining two columns of the target table).
  
  Is there a way to get around this? I have to manually change the km? If so how would I go to do it?
  
  Also I'm using Oracle GoldenGate JKM (OGG oracle for oracle).
  
  Thanks and really appreciate the help
  
  Ajay

  "ORA-00979"when the CDC feature (logging) using ODI with Modules of knowledge including the aggregate SQL function works [ID 424344.1]
  Updated 11 March 2009 Type status MODERATE PROBLEM

  In this Document
  Symptoms
  Cause
  Solution
  Alternatives:

  This document is available to you through process of rapid visibility (RaV) of the Oracle's Support and therefore was not subject to an independent technical review.

  Applies to:
  Oracle Data Integrator - Version: 3.2.03.01
  This problem can occur on any platform.
  Symptoms
  After successfully testing UI integration ODI using a function of aggregation such as MIN, MAX, SUM, it is necessary to implement change using tables of Journalized Data Capture operations.

  However, during the execution of the integration Interface to retrieve only records from Journalized, has problems to step load module loading knowledge data and the following message appears in the log of ODI:

  ORA-00979: not a GROUP BY expression
  Cause
  Using the two CDC - logging and functions of aggregation gives rise to complex problems.
  Solution

  Technically, there is a work around for this problem (see below).
  WARNING: Problem of engineers Oracle a severe cautioned that such a type of establishment may give results that are not what could be expected. This is related to how ODI logging is applied in the form of specific logging tables. In this case, the aggregate function works only on the subset that is stored (referenced) in the table of logging and on completeness of the Source table.

  We recommend that you avoid this type of integration set ups Interface.
  Alternatives:

  1. the problem is due to the JRN_ * missing columns in the clause of "group by" SQL generated.

  The work around is to duplicate the knowledge (LKM) loading Module and the clone, change step "Load Data" by editing the tab 'Source on command' and substituting the following statement:
  <%=odiRef.getGrpBy()%>

  with
  <%=odiRef.getGrpBy()%>
  <%if ((odiRef.getGrpBy().length() > 0) && (odiRef.getPop("HAS_JRN").equals("1"))) {%>
  JRN_FLAG, JRN_SUBSCRIBER, JRN_DATE
  <%}%>

  2. it is possible to develop two alternative solutions:

  (a) develop two separate and distinct integration Interfaces:

  * The first integration Interface loads the data into a temporary Table and specify aggregate functions to use in this initial integration Interface.
  * The second integration Interfaces uses the temporary Table as Source. Note that if you create the Table in the Interface, it is necessary to drag and drop Interface for integration into the Source Panel.

  (b) define the two connections to the database so that separate and distinct references to the Interface of two integration server Data Sources (one for the newspaper, one of the other Tables). In this case, the aggregate function will be executed on the schema of the Source.

  Display related information regarding
  Products

  * Middleware > Business Intelligence > Oracle Data Integrator (ODI) > Oracle Data Integrator

  Keywords
  ODI; AGGREGATE; ORACLE DATA INTEGRATOR; KNOWLEDGE MODULES; CDC; SUNOPSIS
  Errors
  ORA-979

  Please find above the content of the RTO.
  It should show you this if you search this ID in the Search Knowledge Base

  See you soon
  Sachin

• Tabular presentation - history of the journal record

  Hi all
  I have a scenario where I have to monitor or insert a record into a table on the activity of the user. So I have to just watch and insert a row in a table, all that the user is in a table as a new record is added or updated to date of existing record or deleting the record in another table. Does anyone know how to do it.
  
  I'm able to do in regular form as he PAGE that are associated with element. But the form that resembles a report and is not associated any point Page. I'm not sure how to monitor users ' activity.
  
  Thank you
  Lucy

  Hello

  You can run this example to understand how she can actually trigger

  drop table trg_demo;
  drop table trg_demo_bak;
  create table trg_demo(
  col1 VARCHAR2(50),
  col2 VARCHAR2(50)
  );
  
  create table trg_demo_bak(
  col1_old VARCHAR2(50),
  col1_new VARCHAR2(50),
  col2_old VARCHAR2(50),
  col2_new VARCHAR2(50),
  log_type VARCHAR2(50)
  );
  
  CREATE OR REPLACE TRIGGER BIUD_TRG_DEMO
   BEFORE INSERT OR DELETE OR UPDATE ON trg_demo
   FOR EACH ROW
  DECLARE
   l_type VARCHAR2(50);
  BEGIN
  
    IF inserting THEN
      l_type := 'INSERT';
    ELSIF updating THEN
      l_type := 'UPDATE';
    ELSIF deleting THEN
      l_type := 'DELETE';
    END IF;
  
    INSERT INTO trg_demo_bak(col1_old,col1_new,col2_old,col2_new,log_type)VALUES(:OLD.COL1,:NEW.COL1,:OLD.COL2,:NEW.COL2,l_type);
  
  END;
  / 
  
  insert into trg_demo (col1,col2) values('test1_col1','test1_col2');
  
  insert into trg_demo (col1,col2) values('test2_col1','test1_col2');
  
  update trg_demo set col2 = 'test1_col2' WHERE col1 = 'test2_col1';
  
  insert into trg_demo (col1,col2) values('wrong_data1_col1','wrong_data1_col2');
  
  delete from trg_demo where col1 = 'wrong_data1_col1';
  
  select *
  from trg_demo_bak;
  

  Kind regards
  Jari

  Published by: jarola on October 12, 2010 19:38

• The photos in photo looks blurry, with large pixels. Recorded images were of high resolution, why what is happening?

  I used the migration assistant to transfer all the data from my old macbook pro to my new iMac, now the images in the Photos seem to be blurred, with large pixels. Recorded images were of high resolution, why what is happening? Is it possible to fix it. In the old macbook pro, the image looks ok.

  Migration assistant has a really bad experience with iPhoto and Photos

  If you still your old MB of available space, connect it to your new Mac (network, mode target firewire or use an external to the Mac OS extended (journaled) format hard drive and drag the iPhoto library folder images on the new Mac and heck the iPhoto library to icon in the Dock to migrate Photos)

  I hope this will work better

  LN

• Restore the master book record

  Hello

  I have a MacBook Pro and installed windows via bootcamp 10. Now, I wanted to created a partition which can be read/written by windows and mac software. I created a partition in the format exfat under OS X. I couldn't write on this partition under windows, so I wanted to delete the partition exfat and create a new Windows.

  It seems that I deleted the wrong partition, because only 10 windows then begins. If I press the CMD key during startup, only 10 of Windows appears. I suppose that the Master Boot Record does not work. Is it possible to repair the master boot record?

  My time Machine backup seems to be corrupted too and does not work.

  Thanks for the help!

  Note that if you use Boot Camp Assistant to create your Windows partition, you cannot create additional partitions. You can have the OS X and Windows partition. Create a third partition causes the transition from Windows to be of any use.

  According to the current state, you must start the computer in the HD Recovery, disk utility open partition all the drive back to a single partition, then reinstall a new copy of Mac OS X.

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• How can I connect a Labview XY (cluster of 2 tables) TestStand 2010 SP1 chart and do appear correctly in the report?

  Patterns of data record TestStand 2010 SP1 default shared this cluster in two tables stored as binary data, resulting in two graphs displayed in the report: one for data and one for X data Y. We need the elements X and Y, couples on the same graph. This cluster is marked for logging as a step output variable. It seems possible to add a table "PROP_XYGRAPH" (similar to the PROP_ANALOGWAVEFORM) to the schema to simplify the other treatment after the database record, but how can we get the Builder, to accept this type of data is displayed correctly? XY graphics come from LabVIEW 2013 SP1 exclusively as a cluster of two matrices, usually between 500 and 1,000 items long.

  ... Geoff.

  Hello Geoff,

  Had a few resources for you to check. Let us know if none of them work for you.

  Inserting an image of LabVIEW Control:

  <>http://www.NI.com/example/30736/en/ >

  Display of graphics in TestStand:

  <>https://decibel.NI.com/content/docs/doc-38945 >

  Display of measurement data in the shape of graph:

  <>http://zone.NI.com/reference/en-XX/help/370052J-01/tsref/infotopics/measurement_data/ >

  See you soon!

• How can I get my Teststand report to display only the data of the latest iteration of a loop DoWhile ONLY stage?

  Good so I a DoWhile loop with a numeric value to test.  The loop will run 10 times.  I want only the status of success/failure of the test of the numerical value of the last iteration of the loop is displayed in the report.  I don't like on the other iterations.  Help, please!  Thanks in advance I think that this can be accomplished with the recall of ModifyReportEntry and fancy logic...

  Thanks for your comments everyone.  I ended up changing the reportgen_txt.seq to identify during my test was in a loop (by setting an additional result in the different stages of my comment loop-step to say "Record last loop.".)  Once this indicator lies in the ResultList I turn to reportgen_txt, I have to loop through all the ResultList entries and if the current entry has the same name and the "record last of loop." as a previous entry, I delete the previous entry and store the current.  All this way, I have to do is to set a flag in my test sequence, and if when debugging, I want to see all the data for all the iterations, I just remove the flag.

  The reportgen_txt.seq include:

  C:\Program NIUninstaller Instruments\TestStand 2010\Components\Models\TestStandModels

  I'm not worried about the time constants on my generation of report and I am not limited to stress strict memory so this seemed like the best way for me to do what I had accomplished.  I'm sure there are better ways, but it seemed simpler than the generation of report definition to be disabled and then enabled...

• Programmatically disable the record result

  I am creating a user of Visual Studio c# application, and I want to disable the result of registration in certain circumstances.

  Currently, I put the engine of the Application Manager. DisableResults to true in my application from Visual Studio, but that changes the setting configured at all times (when I open the TestStand sequence editor, set it up |) Station options | Execution | Disable recording of results of all sequences is changed).

  I am looking for a solution that can be called from my Visual Studio application that disables the result of recording before execution of the sequence, but does not change the State of the installed product TestStand.

  Be very specific on objects that you manage. Otherwise, you will end up with a bizarre and unexpected behavior.

  Have you had the chance to attend class NI TS 2?

  If so, please see the chapter on the TS API.

  If not, I give you a few tips:

  -An object of type 'File of sequence' (general) contains one or more objects of type "Sequence".

  -An object of type 'Séquence' (general) contains one or more objects of type 'Step '.

  -Both the 'Séquence' and 'Step' object have a property that holds the information if TS must collect the result of step of the sequence.

  -For the stage, it would be 'ResultOption' (default 1, disable-0 online)

  -For the sequence, it would be RecordResults (default TRUE, disable-online FALSE)

  Note that some properties of objects can be 'hidden '. You can enable the display of hidden properties by configuring TS ' > preferences show hidden properties "check box.

  Norbert

• deliver results Records

  I use TestStand 4.1 and have the following problem:

  In my main loop, I call functions and the digital test on my results. It works very well. My problem is with the recording of the results. When the report came out, all that is shown is SUCCESS or FAILURE of the call to the function, but not the individual results. What can be the problem?

  I chose the function of the results of recording on each item I want recorded.

  The sequence is attached.

  ThanksNAdvance

  FredTest

  Found the solution!

  It seems that I had accidentally erased the Results.Array of the local population of the PROGRESSIVE STATUS Test. After he was replaced, wa - la, problem solved.

  Thanks for your help though. Funny how TS does not detect this as a problem.

  FredTest

• Tutorial of TestStand Foreach or example

  I am very new to TestStand, can someone point me to an example ForEach or totorial? I'm iteratiing in a table of Local channels, and I don't know how to access each of the elements.

  Kind regards

  Terrell

  I recently used the for each loop in his application for a post where the user can choose to run a certain subset of tests based on a selection.  It takes a little work to get used to the syntax.

  See attached sequence recorded in TestStand 4.0.

  Locals.TestList is an array of 3 elements: test 1, test 2, test 3.

  Locals.test matches the element currently being processed.

  Thank you

  Paul Holzrichter

• TestStand 2012 launch problem

  Hello

  I have an annoying problem with TestStand 2012. Whenever I run the TestStand application a Visual Studio 2010 Shell dialog box appears "invalid license data. Reinstall is required. ». I have no Visual Studio is installed and I've ever had. I certainly never enter any license key. The same dialog box appears when you launch Version TestStand selector.

  I am running Windows 7 Professional 64-bit SP1. Only Microsoft that's installed products are SQL Server Express 2012 and the .NET Framework 4 Runtime. I tried to reinstall times TestStand and .NET Framework always the same dialog box that appears. If I just press "Close" in the dialog box, everything works fine, but really annoying needing to do.

  Someone at - he seen this before and have a solution?

  Thank you

  Mattias

  Mattias_Ericsson wrote:

  Hello

  Well, could work, but I really think that NEITHER should solve this problem properly. I am sure that many will have this problem more as SQL Server 2012 is becoming more common now.

  Thanks for your efforts in trying to help.

  Mattias

  This question, I recorded it in our tracking database. It will probably be addressed in a future release. You might want to try to install Visual Studio 2010 Express (I think it's a free download from Microsoft), or the alternative, I suggested.

  -Doug

• teststand to the remote database connection

  I have a test station in teststand running factory.  I want to log/query a database located on a network server in my installation by ethernet.  Can TestStand using its types of step address/access database this database for viewing and querying records?

  TestStand features of database, including the types of step of database using Microsoft ADO/OLE DB layer and providers installed on a system. Microsoft has an ODBC provider, TestStand can talk to any remote database system that supports the technology of this software. Take a look at the help topic "TestStand Database Fundamentals" in the online help for more information on this. Suggestion of love to look at the example is right on.

  Step TestStand database types are a way to access a database at a high level, but if you want to process the data in a more complex way, you can consider your connectivity database and processing in a code module using the programming language of your choice and call this code of TestStand module.

• Password TestStand

  Hello

  I'm developing a test with TestStand 2010. I protected the file changes sequence of test users by setting a password for the administrator, I have now... I forgot (Yes, I know, stupid!). I thought that I had recorded in my password database (keePass2), but obviously I was wrong.

  I thought that by uninstalling TestStand and re - install I would have had the ability to reset user information, but I was wrong it too...

  How can I save my TestStand Development? Should I uninstall all suite of development OR s/w?, clean the registry?

  Any help much appreciated.

  Thank you

  Marco

  Try to rename the User.ini file in the CFG folder, then launch TestStand SeqEditor. There should be a new User.ini file created with the default settings. That is to say without password administrator.