Record the entire Session?

Similar Questions

• How come back initially on an editing session without closing the entire program and start again?

  How come back initially on an editing session without closing the entire program and start again?

  Hello

  There are two answers to this. If you have not saved the image since the opening, you can restore the file Menu-Revert or F12 and that will bring back you at the beginning. A more elegant solution is the historical Panel.

  Photoshop has a history panel (Windows Menu-history) that keeps track of everything you do on an image and allows you to go back in the flow of work and in effect then go ahead if you change your mind. The original image is always registered as a snapshot and then subsequent action recording. So you can come back not only the original image, but any previous change after opening. You can even take your own snapshots which is a useful feature.

  Hope that helps

  Terri

  

• How to close a jmf rtp session when the entire file is sent.

  I use jmf to stream a video file from one client to another, everything seems to work fine except for the fact that I don't know how to close the prosessor and the session/datasink on the transmission side when customers the clientis done streaming, I can close lets say after 60 seconds of starting, but I am not able to understand how to stop when the entire record is streaming. I tried to use the datasinklistner when sending the video and the following code

  public void dataSinkUpdate(DataSinkEvent event) {
  
           if (event instanceof javax.media.datasink.EndOfStreamEvent) {
               endOfStream = true;
  
           }
       }

  but the endofstream event is never received from the data source.
  
  the problem is that it works very well if I using 20 second video and I close the datasink and the processor in 60 seconds, the entire file get listened to but if I have a file for more than 60 seconds, then just file is reduced to 60 seconds.
  
  I also tried to use a sessionmanager a sessionlistener and a sendStreamListener with the following code

  /**
       * SessionListener.
       */
      public synchronized void update(SessionEvent evt) {
  
  
      }
  
  
      /**
       * SendStreamListener
       */
      public synchronized void update( SendStreamEvent evt) {
          System.out.println(evt);
  
       if (evt instanceof InactiveSendStreamEvent) {
            flag=true;
            System.out.println("done");
  
  
       }
       if (evt instanceof ActiveSendStreamEvent) {
  
           System.out.println("start");
  
  
      }
      }

  I ran the code and send files and everything, but neither an activestreamevent nor an inactivestreamevent happens but the file is currently distributed correctly

  user13490676 wrote:
  could this be a problem with jmf itself that the endofstream don't get generated for the playing of a file data source

  In this case, that would be the problem... more that likely there is something odd about the file, maybe it doesn't have a duration set in the header and JMF treats it as a live stream.

  You can always write a custom data source that passes right through the entrance of a normal data source and then generate the EndOfStream event yourself... maybe based on a timeout counter or failure? I have not received all the data in x seconds or after x attempts, so I guess that the file is... Or when you have read enough data that the file cannot have more (read > = file header / data file)...

• How can I record the sessions of navigation and reopen it in Firefox 4?

  I don't have tools and options with all this that cutesy c * like FF used to have. FF4 has two bars of different option under Firefox Orange drop-down list menu, and another drop options to the bottom of the menu box options. So how the hell do I record a browsing session? So how do I open it again? Can I put this thing to reopen the last browsing tabs session as normal browsers do? And I can get this stuff without crushing the thing cursed every 5 minutes? Thank you-keimanzero

  For FF:
  ... Why I have to jump through obstacles to get the FF reload my previous session? Why change something that already works? "it works,
  
  SECOND OF ALL, if I close FF and then click on a link somewhere in a Microsoft Word, then FF will open it! and guess what? Restore previous session will be grayed out.
  ESPECIALLY, when you see "26 of 58 people found this answer helpful" that means that you...

  Here it says "Add image." I would have taken a dump, take a picture of it and put everything here... FF does not deserve my dump!

  Edited by a moderator because of the language. See the rules and lines guidelines .

• I saved my adobe files temporarily muse in my computer when I restart my PC I see not the mt files, please tell me how to recover my files and how to record my entire Web site file using save option.

  I saved my adobe files temporarily muse in my computer when I restart my PC I see not the mt files, please tell me how to recover my files and how to record my entire Web site file using save option.

  When you talk about 'temporarily' as record files in the temporary folder and then by restarting the machine will lose files. You can save the file in any location stored as reader or office and then reopen the case should show all of the content without any loss.

  If the files are deleted or lost there's no way to recover those, sorry if this is the case.

  Thank you

  Sanjit

• Record type.  Display the entire register with DBMS_output.putline

  Hello. I have the following code, I've played with to better understand the Collections. I have a 'how' question. Is there a way to dbms_output.putline a complete file or I have to name each column as I began to do in the code below?
  
  If there is no single statement to display a record, is it a good way to dynamically loop through the registration and use of dbms_output.putline for each output column without having to name each column explicitly?
  
  Thanks much for any help.
  

  DECLARE
  pc_info_rec performance_clusters%rowtype;
  
  CURSOR C1 IS 
       SELECT * 
       INTO pc_info_rec
       FROM performance_clusters 
       WHERE rownum < 11; 
  
  BEGIN
       OPEN C1;
       LOOP
       FETCH C1 INTO pc_info_rec;
       EXIT WHEN C1%NOTFOUND;
  
                  -- Currently have to name each column in the record, but would prefer a simpler way to output the entire record
            DBMS_OUTPUT.PUT_LINE (pc_info_rec.pc_code||', '||pc_info_rec.zip3);
  
  
       END LOOP;
       CLOSE C1;
  END; 
  /

  You can not 'loop' in the columns folder. You must list the columns individually. As I already mentioned, if you need display case in many places, you can create a procedure (you don't need a package as I suggested earlier):

  SQL> create or replace
    2    procedure print_dept_rec(
    3                             p_rec dept%rowtype
    4                            )
    5      is
    6      begin
    7          dbms_output.put_line(p_rec.deptno || ', ' || p_rec.dname || ', ' || p_rec.loc);
    8  end;
    9  /
  
  Procedure created.
  
  SQL> set serveroutput on
  SQL> DECLARE
    2      v_rec dept%rowtype;
    3      CURSOR C1 IS SELECT  *
    4              FROM  dept;
    5  BEGIN
    6      OPEN C1;
    7      LOOP
    8        FETCH C1 INTO v_rec;
    9        EXIT WHEN C1%NOTFOUND;
   10        print_dept_rec(v_rec);
   11      END LOOP;
   12      CLOSE C1;
   13  END;
   14  /
  10, ACCOUNTING, NEW YORK
  20, RESEARCH, DALLAS
  30, SALES, CHICAGO
  40, OPERATIONS, BOSTON
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  Obviously, you will need to create a procedure for each record type.

  SY.

• The entire animation twice in loop and stop at a record label?

  Hello community,

  I can't find out how my banneranimation stop a label after completing two loops.

  I tried different approaches I found in Google searches, but none of them seems to apply to the way my banner is constructed

  Can anyone help?

  You can download the entire project here

  Hello

  You have 2 examples with your own project here: read and stop a movie.

  I use a meter to check your movie using the dashboard API: sym.setVariable () and sym.getVariable ().

  • I have create a counter: sym.setVariable("loop",1);
  • I increment the counter: sym.setVariable ("loop", sym.getVariable ("loop") + 1);

• OpenScript does not record the session

  Hi gems... good afternoon...
  
  I am doing a test for our application of load basis. All related services oats are up. Version of OATS is 12.1.0.1
  
  In configuring Oracle Application Testing in database > Oracle load testing, the schema is 'base default BTA' in the same server of the main schema (of which the application is directed).
  
  The openscript I tried to record the actions to load tests, but it does not record anything.
  
  My navigations are:
  Start > all programs > Oracle application testing suite > File > New > Load Testing (Protocol Automation) > Web/HTTP > Default Repositiory > (given name) > finish
  
  Then I start recording, open browser window, I hit our connected URL and performed an offline action and stop recording.
  But nothing got recorded.
  
  
  However, openscript for the functional test script generation / regression registers the actions properly.
  
  
  Is this a bug or is it my mistake... Thanks in advance.

  Hello

  Try to provide complete domain name ie. MachineName.domain:8080.

  And make sure that there is no redirection to localhost. As I said all that with localhost in the URL is NOT registered.

  Concerning

  Wayne.

• Why my entire session stood

  Why I can't export my record... the duration of the session did, I knew as export step like that... file > export > multi track mixdown > entire session... but do not click on any of the session... Please help me urgent. Thank you

  You use this when you are working in a multitrack session? It will not be enabled if you are in the waveform editing view.

• History shows that the current session. No history of a previous session.

  Firefox 41.0.1 Windows 8.1.
  Since the update to version 38 (?) 'show history' shows only the current session.
  I have since uodated against 41 with no improvement, bookmarks have remained stable.
  I tried: -.
  Delete Places.sqlite
  Re-install
  SafeMode (no addons)
  Disablimg AVG and defender
  Wisecare and CSA Disablimg

  Changing privacy options:
  Toggle the custom setting remember history/use
  Toggle Private mode on/off
  Clear history displayed/hidden power

  Created a new profile with the Profile Manager.

  Checked the owner and access control of all files and folders in the profile, all full access and read only =.

  Installed the "Housekeeping" module and run it.

  Can anyone suggest any other delicious dishes, or is this a bug of FF running under Win 8.1?

  It creaks! Finally! I think so. I did a positive negative control.
  After a lot of installation and reinstallation of FF. (Why the standard uninstall leaves as many orphaned files program / files / registry entries?) When I decide the uninstall, everything must be removed!)
  Finally, I uninstalled the newer version of the CSA. Even if all the options for the 'cleaning' and 'monitoring' Firefox were off, it seems that it was ups that prevented the record of history. Once that was removed and then history began to be recorded. She did not used to happen. I used the previous versions for many years without problem, but it seems that one of the recent updates (version unknown) started blocking the history of FF.
  (For obvious reasons, I have re - install CSA just to prove the point.)
  PS at the moment, I'm also stay with the version of FF 39

• How can I disable groups of tabs? It requires the same tabs to reopen at the next session

  I upgraded to 6.0.1 and experimented with tab groups. Now I can not turn off. It seems to force the same tabs open with the next session. I had (and still have) the warn me when I close the multiple tabs. She replaces this option if I click on the window is closed. Just, it closes the window of firefox and will reopen all the tabs with the next session. This cancels the best feature that firefox has more chrome.

  Please help me to recover my old Firefox...

  Okay, it's stupid, but simple. Go to tools > Options > general. then in the options switch box to "show my windows and tabs from last time" to "show my home page". I entirely agree that tabgroups are pretty useless and the fact that there are already speaks volumes on their apparent worth questions upward around the Mozilla forums, but also the YAnswers about disabling, or its absence.

• Satellite L300: How to record the sound from a video without sound

  OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

  On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

  I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

  Does anyone have a solution of how to record sound with the speakers on mute?

  Hello

  I also recorded the audio of a video file using another software called 32. and Win XP
  I also used the stereo mix, but to be honest I have never muted the speakers while recording.
  To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
  But as I said, I've never tested and that's why I m not very good if it will work.

• acquisition of wireless signals and record the signal as text at the same time for 5 minutes

  Hello

  I'm wireless ECG signal and the display in waveform graph. And at the same time, I need to save it as text for 5 minutes. The problem I faced is for record of the signal, I use scripture to the extent file that saves the file as text... but everything by saving the trace speed decreases.

  I'm very new to labview so please can someone me if Miss me something in it... Please help...

  Why people always post photos of their screws rather than the screws themselves or at least excerpts?  We can't tell from the picture what Version of LabVIEW, you use (so if we post code, you will not be able to open it), and we can not 'play' with your code and try without, ourselves, by hand, trying to recreate your diagram (sometimes very small).  Please, help us help you!

  This is in any case helps to familiarize yourself with the design of producer/consumer model.

  1. Open LabVIEW.
  2. Click on 'File', choose 'new '.... "(no new VI), then (in models) producer/consumer Design Pattern (data).
  3. Study the model and adapt it to your problem.

  The producer would be anything that generates data.  Once you have the data, you put on the queue and send to the consumer for the entire treatment.  The idea is that the producer has an inherent calendar that he must answer, otherwise you lose data points.  The consumer, on the other hand, just need to follow 'more or less' (in fact, the queue may / will develop, if the amount of data is not megabytes, so the consumer can really be quite slow, if you usually want to consumers, on average, to be at least as fast as the producer).

  Bob Schor

• Am I duplicating music clip-zip when I download the entire file of MUSIC from Windows Media?

  On my Zip Clip with a micro 32 card: using Windows Media, I downloaded my whole 'MUSIC' of the file to the device.   Now that I've added more music in my Windows Media MUSIC file, download the entire file again for "updating" of new music, than i've got, or will I be duplicating what was there before?

  It seems terribly painful to have to selectively add new music, checking back & comes to see what is already uploaded on the Clip-Zip.

  If you use the 'sync' feature in WMP, it will add only what is new or changed in your music on your computer folder. Note that this method is a double-edged sword; It will also remove all the files that you may have removed the record music from your computer. This is not a good thing.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">