Recorded movie has no video, audio only

Similar Questions

• Premiere Pro CC2015. Clips are transferred to the timeline without the video, audio only.

  Clips are transferred to the timeline without the video, audio only. Add video and audio together are only possible if you first close all sequences and throw the clip on the timeline vacuum . The CC14 wasn't like that. What is the problem and how to fix it?

  Is your Source patch and targeting of the track set correctly?

  

  MtD

• timeline will not play video, audio only

  I just recently changed computers (windows 7 to Windows 7) and when I re-installed first CS5.5 on my new computer the video in the timeline never plays.

  The video box timeline shows a graph in offline media even after all the media was reconnected.

  When I press play, the playhead moves, but he will play only the audio and only shows the graph of media for the video offline. I tested a few of the clips to see if they would play in the source monitor, and each of them has played very well. It's just the video editing window that will not play.

  He started work yesterday for some reason, I don't know, but when I opened it the program it was back to the same problem.

  I watched a ton of messages, but none of them seem to have this same problem.

  I just figured out how to fix it. There are a lot of files in this project because it's a feature. So I thought maybe he could start working after all files have been reconnected (not only those of the sequence in which I was currently working). So last night I reconnected it most of them and the video began to appear in the monitor of the chronology for each sequence, I opened. I don't know why it did not show anything either until everything has been reconnected, but now it works. Thanks for your help!

• MOV is black and audio only

  I am trying to ingest footage that is in one. MOV format. I tried to put it in Media Encoder to encode in Cineform, our mezzanine codec, but it is completely black with no pictures when I do. A side note, when I double-click it in Windows, the image is perfectly fine. I then try to import it directly into Premiere Pro, but instead of a black screen now it imports only audio. Anyone know what to do? Thanks in advance!

  The clip has a framerate exceptionally: fps 24,672

  Can convert to a constant framerate with HandBrake first before importing it in first.

  With what camera these photos were taken?

• Video audio only black

  Hi communities

  By the sudden creation does not show me any video in the preview and if I encode a flie is black. I have audio in the preview and the encoded file but no video. I try to superimpose a title to see if there is a video problem, but also title is not displayed. I use video files, I've used in the past that worked very well. Same project as renderings 4 perfect days ago, now gets me a black result. There was no upgrade known about something special that I am aware of. Only change is my place in europe to the United States (if there is something like a regional code?).

  If someone has an idea. Thank you.

  

  Deactivation of acceleration gpu solved the problem.

  Greetings

• No video, audio only

  I have a HP Pavilion dv6-2150us, Windows 7, Internet Explorer.  When you try to play a video, only audio comes through.  What can I do to fix this?

  then I would reinstall IE because in this browser, you have problems.

• C40 versus 3000MXP recording Local & Far - end video & audio

  Hello

  On a project, we would use a 3000MXP Integrator codec.

  But we discovered that this device is rained on the price list to sell more.

  The next thing would be a codec C40. With of course is a much better codec.

  But... I couldn't find a way to put Audio and video outputs (DVI or HDMI), so we can save on a local VCR the far and the near the end of a video conferencing session.

  We have a single screen in the room on this screen, we would like the end of the great video Far on the screen and the small local video (PIP function by default)

  But for the record, we would like to have a screen with equal participants.

  Note: We have a video scaler which creates video PAL to a DVI/HDMI signal.

  We need simple local recording due to security issues related to the meeting by videoconference.

  So my question is: Y at - there a way to set the HDMI to DVI output so that we can see, site-by-site Local and Far-end Ditto for audio and video.

  As in the 3000MXP

  Thanks in advance

  Bert-Wietze Dijk

  You might be able to do what you want by using the TC Console (it's a free tool):

  http://developer.Cisco.com/Web/Telepresence-developer/tools/integrators/TC-console

  /Jens

• no dvd video, audio only

  I don't get all the videos on my dvd.  I get audio very well, but I can't see the menu page or interact with him.  I just took the dvd Corel decoder and installed to see if it works and there, down from $ 10.  reg avi files play fine, it's just with dvds.  How can I fix it?

  Hi Larryvis,

  ·         What application you're using to play the dvd?

  If you use Windows Media Player, then try to update the codecs to check if the problem persists. See the following Microsoft Knowledge Base article mentioned.

  Player Windows Media for Windows XP supported Codecs

  http://support.Microsoft.com/kb/291948

   

  How to Download Codecs automatically in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/291818

   

  I hope this helps.

• Some videos transferred does not work on Windows Media Player (no picture when playing video, audio only)

  Hello!

  I have this problem, and it's very frustrating.

  I tried to solve this problem, but it seems that it does not work.

  When I want to click and open to see a video that was my old HTC SD card that I transferred all the files and videos on my account Dropbox, and now when I try to open and watch the video, it doesn't appear as an audio file and not with the original video.

  However, when I watch the video on my Dropbox account or my Samsung phone, it's showing the video perfectly well. I also tried to transfer the videos separately, but it simply doesn't. Here I'll show you a picture of what it looks like on the videos which does not appear

  http://oi58.Tinypic.com/wi4ub8.jpg

  And it's one of the rare videos that work to see, (on the phone EVEN HTC and SD card)

  http://gyazo.com/090902637ebd63f7fa6ff6080d40a409

  Help, please!

  Hello, I have now fixed my problem by downloading a converter called Freemake Video Converter!

• Export the clip with no video, audio only and keep the timecode

  I have transcribed for a documentary film clips. There are many of them and my transcribers using a program that can use the timecode of audio and video files.

  We are Dropboxing so I want them to be just audio files, but I need the timecode to stay on the clips when I export the audio.

  So far he strips and all I get is life.

  The original videos are in. MTS format. They import in first CC very well, but when I export the audio the initial timecode disappeared.

  The other option would be to compress the video and the watermark, but the time code disappears when I do that too.

  I think that I get it.

  You want just the files as small as possible. Right? That's why you just want audio?

  Well, rather than do without the video completely, just to reduce the flow of something terribly weak, where the video is barely able to be seen. You want to export to a format that the program can handle, like Quicktime. But where I could export to 25 Mb/s, you might be able to export 1 Mb/s. The video will look terrible. Well, so what? Who cares? Right?

  But there the timecode.

  When their web page says they can accept different audio formats, I don't think they hear audio by itself. They mean that the audio in the video stream may be audio AIFF, WAV, AAC and MP3.

• my hard drive has stopped playing audio, only during DVD playback. XP Home Edition. What should I do

  ASUS SDRW - 08D 1 S - U Eee PC

  Hi towertool,

  1. what type of file on the DVD?

  2. is it works much earlier? If so, then remember to make changes to the computer, after which the issue started?

  Try the steps from the link to the following article and see if it helps:

  How to troubleshoot problems that occur when you play a DVD in Windows XP

  I hope this helps.

• Windows Movie Maker plays audio only, from video files downloaded

  (I see other, similar types of questions about my problem, but none that fits 'exactly'.  So here we are...)  Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer.  Files saved as .mpg files.

  When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).

  I used the 'compatibility', put options different filters turned off. but this does not work either.

  What should I do to solve my problem (and subsequently, to play these videos)?

  (I see other, similar types of questions about my problem, but none that fits 'exactly'.  So here we are...)  Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer.  Files saved as .mpg files.

  When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).

  I used the 'compatibility', put options different filters turned off. but this does not work either.

  What should I do to solve my problem (and subsequently, to play these videos)?

  =====================================
  Movie Maker has problems of compatibility with .mpg
  conversion of files... files in .wmv format .mpg
  before you import into Movie Maker may be your solution.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your clips .mpg video on the
  main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  More info... This article treats your
  question of ' audio only ':

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• Try to record audio only from a small video clip of a digital camera.

  Try to record audio only from a small video clip of a digital camera.

  How to do it on Vista?

  Hi robt1962,

  Thank you for using answers Forum.

  You may be able to use Windows MovieMaker to extract audio from your video file, depending on the format.

  If you use your favorite search engine and look for "extract the audio from video using windows moviemaker" for more details.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.