Recording connection failure attempts

Similar Questions

• ACS 3.1 user account disable failure attempts to exceed:

  I look through the documentation on ACS 3.1 and can't seem to find the default password attempts failed. What I want to know is if there is a time limit for how long between password attempts failed the counter is reset. ACS retains an infinite number of the race and after failed attempts the account determined locks if there were 2 minutes or 2 weeks between failed attempts or there at - it some time, after which the failed attempts are disabled?

  Thanks in advance.

  There is no timetable associated with it. If the user enters an incorrect password 5 times in a row (by default) over a period of time, the account is disabled.

  ACS maintains a counter of the current number of connection failures for each account in its database, and it resets it to 0 if there is a successful connection. Theoretically, you can connect 4 times incorrectly, wait a year, and as long as your database is still intact connection again with an invalid pw and the account will be disabled.

• How to turn off the message waiting after a connection failure?

  Hello

  I'm testing a new login process. Sometimes, I can not connect due to bugs in my procedures.

  
  

  On the login screen, there is a connection message that makes you wait 5, 10, 15 seconds etc after a connection failure.

  
  

  I don't want no waiting to connect again.

  
  

  I use APEX 5.0.3 with Oracle 11 GR 2
  

  
  

  Best regards.
  

  The connection limit is to reduce the risk of denial of service attacks, and therefore it is not recommended to disable this feature.

  That being said, you can turn off the countdown to the instance level and not at the level of the application.  Connect to Oracle Application Express Administration Services. Click manage an Instance from the drop-down list level, and then select Security. Click on the authentication tab, and then under global settings, to 'delay after connection attempts that failed in a few seconds', enter 0 to disable the countdown and allow immediate access.

• Connection failure: unknown username or bad password

  I use Thunderbird without problem for businesses for nearly eight years. I currently run at the top of a tower with Windows 7 Pro. There is only a single account/e-mail address on Thunderbird.

  This morning when I went to check my e-mail I have my password is requested, then received the error 'sending of password did not. Mail server exchange.company.com replied: connection failure: unknown username or bad password. "I retried the password, restart Thunderbird and tried again, but still not received the same error. I sent an email from Thunderbird test which was very good. I am also able to connect to the server via web browser and I am able to send and receive emails on my mobile device.

  I erased all the saved passwords of Thunderbird and I checked account settings, but I am still unable to download any email Thunderbird.

  Apart from the deletion of the account, I don't really know what to do here. Any help would be appreciated! Thank you.

  The problem has been resolved. Apparently the POP stack had to be reset by the side of the Exchange.

  I hope this helps someone in the future...

• ERROR: Connection failure: unknown username or bad password

  Whenever I want too run a .exe field or a program that requires administrative permissions, I type my password using the account control user, but instead of just let me through it come up with this error:

  Connection failure: unknown username or bad password.

  I searched for fixes, but have not found one that works.

  This was a very big problem I am a player computer and all the games I have, have the administrative sign (shield) and or are .exe files.

  This has happened for about 3 or 4 months now... It really gets me upset. Since there is no way to shut off User Account Control (UAC) without opening UAC itself...

  I'm running on a:

  Manufacturer: Acer
  Model: Aspire M1201
  : Processor Dual-Core AMD (tm) 8550 2.20 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit operating system

  http://www.Petri.co.il/disable_uac_in_windows_vista.htm

  Read method 1.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 professional - connection failure: unknown username or bad password.

  I have new xps computers 8700 identical Dell running windows 7 Professional.  The new dells replace the old dell dimension computers Windows XP Edition Professional.  I traced a drive 'f:' of network easily to my server from windows 2000 of the first Windows 7 Professional machine.  But when I tried to map the "f:" network drive on my windows 2000 Professional 2nd new windows machine Server 7 I got the following message: "connection failure: unknown username or bad password."  The computers are identical.  After the introduction of the first professional machine of windows 7 with success and mapping the drive "f:" on my server, I cloned the drive hard so that all my apps and settings would be the same on the second Professional machine of windows 7.   I tried to change the 2nd windows 7 professional name of the computer, but I still regularly get the "connection failure: unknown username or bad password."  Any ideas or suggestions would be greatly appreciated.

  Thanks in advance,

  Ken Preston

  Hello Ken,

  Thanks for posting your question on the forum of the Microsoft community.

  The issue you mentioned will be better suited for the public of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• ISE max connection failures

  In ISE, is - anyone know if the tally for the failures of maximum connection for accounts invited (found under settings > comments > political portal page) is one per session or cumulative setting during the lifetime of the account? The County never resets and is there a way to display the current number of connections that have failed?

  Our use case, is that we have guest accounts that distributed to multiple hosts (for example for a hosted conference or special event). We had a couple of this type of accounts get suspended because of hitting max connection failures. We have increased the adjustment, but I would like to understand the parameters more has some of the guest accounts must apply to a significant period of time.

  This is per session, when logged in successfully, the counter is reset.

• Unable to connect to a Samba file server. error "the connection failure: unknown username or bad password?"

  Original title: I can't connect to a server to Samba from Windows 7 files

  I used to use a Mac machine to connect to a file server Samba as smb://myfileserver.mycompany. Now I use a PC with Windows 7 Professional and when I write the address on Explorer as \\myfileserver.mycompany it opens a pop-up to enter my credentials, but when I put my authentication information and click ok, it reminds me the pop-up to try again with a message stating "connection failure: unknown username or bad password.'. '.

  I tried several times but still the same result.

  Is there another way to do this?

  Is there a third party app that will do this job?

  Thank you.

  Hello

  (1) is the computer connected to the domain?

  (2) is the issue specific to your username and password?

  (3) tried to connect from different computer?

  If the problem is specific to your username and password please contact the it Department for assistance.

• Host connection failure: VMs, warehouses of data inaccessible (in gray)

  Hello everyone,

  I have 1 ESXi host 5.1 throwing alarm: host connection failure. Al a SNMP trap for the entity has been sent.

  I have 10 servers ESXi 5.1 all the amanged by 1 5.1 VCenter server.

  8 ESXi servers belong to a cluster HA and 2 are not in a cluster.

  The issue I'm facing is with 1 ESXi host that is outside the cluster.

  The virtual machines on that host are powered OFF. I am not able to turn on. I am not able to Vmotion them. However, if I remove them from the inventory and add them to the inventory on a different host running, VM works very well.

  Shared on this host data warehouses show Greyed out as well except the local data store (VMFS). I have 1 VM on the local disk of this host and I can power ON the property. But all other virtual machines are the shared data store (NFS - Netapp) and I can not turn on this particular host 1.

  Same data warehouses (NFS - Netapp) are shared with the other 9 (Clustered and nonclustered hosts) ESXi hosts and data store is fine and detected by all hosts.

  I tried to reboot the host several times but without success.

  Can someone please share their expert advise on how to fix this?

  Please see the attachment for details of esxi host does not.

  Thank you

  AG.

  Hello

  Yes, you can remove and install it again, Siu here below KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

  Mohammed

• Unified_Audit_Trail fails to audit connection failures

  Hi all

  Oracle DB EE version 12.1.0.2.

  I have activated Unified_Auditing (pure Mode) on the database and the default policy that ora_logon_failures is enabled.

  We have pooled set up and use the view unified_audit_trail / sys.cdb_unified_audit_trail.

  I see no record of success / failure of connections. I tried to rebuild politics nothing helps.

  Of the clues as to what I can do to solve the problems? I have MOS SR open, but looking for a faster solution.

  Thanks in advance.

  -RR

  Here is some info of parameters:

  CHOOSE the VALUE OF V$ OPTION WHERE PARAMETER = "unified audit."

  VALUE

  ----------------------------------------------------------------

  TRUE

  display the parameter audit_trail

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  AUDIT_TRAIL NONE string

  -DBMS_AUDIT_MGMT. AUDIT_TRAIL_IMMEDIATE_WRITE

  -Select POLICY_NAME, AUDIT_OPTION, AUDIT_CONDITION, COMMUNE of AUDIT_UNIFIED_POLICIES where policy_name = "ORA_LOGON_FAILURES";

  POLICY_NAME AUDIT_OPTION AUDIT_CONDITION COM

  ---------------------------------------- ---------------------------------------- ---------------------------------------- ---

  ORA_LOGON_FAILURES CONNECT NO YES

  -Recreate the policy:

  CREATE AUDIT POLICY ORA_LOGON_FAILURES LOGON ACTIONS;

  -Select * from AUDIT_UNIFIED_ENABLED_POLICIES;

  USER_NAME POLICY_NAME ENABLED_ SUCCESSES FAILURES

  ---------------------------------------- ----------------------------------------                                    --------      ---                ---

  ALL USERS ORA_LOGON_FAILURES BY YES YES

  Looks like it's a bug...

  Unified Audit trail - log Action not captured (Doc ID 1940793.1)

  BUG: 19383839 - no UNIFIED AUDIT - NO logon OR FAILURE of logon ACTION CAPTURED

• Followed ADF connection failure

  IM new to adf... .kindly help to find out how to follow the failure of the connection attempts in adf... as well as for more than 3 attempts have to display error message
  
  Thanks in advance,
  Muthu

  Hello

  Account lockout can be activated in weblogic as in weblogic, you can configure your security vendors.

  --
  Birame

• Before LOCKING connection failures?

  Greetings from the TEXASbig country,

  I've been locked out of my system yesterday morning.  Had other tasks to take charge and after returning home was able to connect on my limited user.

  Would like to know where it is defined, how much, if we can change this setting?  Also would like to know where a person can disable an account and where we might find if there are groups of users listed and if we can disable all those, please?

  These things you are looking for are part of the local security policy of Windows:

  

  You can find more in the WindowsSeven Forums where there is no Microsoft haven't committed Support Engineer 'experts' to send you on the prosecution of the wild goose:

  http://www.SevenForums.com/tutorials/72240-account-lockout-threshold-invalid-logon-attempts.html

• ISCSI connection failure causing ESXi 5.1 VMs at the stop

  Hi all

  At the hope that someone may have seen the problem that we encountered during the last 2 weeks.

  Our virtual machines are performing unexpected stops. Our Exchange Server rebooted twice today

  The closing time is information that we see our Equallogic logs:

  INFO APCEQLM1 09:35:19 7.2.15 26/07/2013. 7.2.24 | 7.2.29 session iSCSI to target '192.168.43.12:3260, iqn.2001-05.com.equallogic:4-52aed6-c7ca4349e-87b00217be35059e-lon-prod-vm-1' initiator ' 192.168.43.31:58797, iqn.1998 - 01.com.vmware:apcesxhost1 - 24c73c18 "was closed. | iSCSI initiator login failure. | No response on the connection for 6 seconds.

  We have 1 Equallogic PS4100X, run the latest firmware EQL 6.0.5. We have 2 switches Powerconnect 6224 stacked. Our table and switches are configured by DELL support.

  We followed the recommendations of DELL on vSphere storage ISCSI connection. I see that our vSwitches are correctly configured.

  Someone has any ideas why we find that this behavior? I have connected this with the support of DELL, but thought I would ask on the forums in case someone knows that it emits.

  Thanks in advance!

  Lee

  Hi Julie,.

  My apologies, I thought that I had updated this discussion with the fix. It was related to a problem of driver on one of our hosts. I logged a call with VMWare and they got the answer very quickly. The problem was our host NETWORK interface card tg3 driver. I've followed this article to resolve the problem:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2035701

  I hope it is of some use to you!

  Thank you

  Lee

• Connection failures "wmiprvse.exe" on Win2008R2

  Hello
  We have the RAC HOST1 production database (sid: PROD1 VIP:10.10.10.1) and HOST2 (sid: PROD2 VIP:10.10.10.2) on Windows 2008R2. Version of database is 10.2.0.5 64-bit and the Infrastructure of the network is 11.2.0.3.
  Early on, there is problem, some process is obviously trying to connect to the database with the windows SYSTEM account, because oracle account SYSTEM crashes after an hour.
  After searching for newspapers, we found that all the exactly 8 minutes he tries to connect:
  
  1 listener.log entered - the port number is not fixed
  + March 27, 2012 12:12:34 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = servicename.domain.si) (INSTANCE_NAME = prod1) (CID = (PROGRAM = C:\Windows\system32\wbem\wmiprvse.exe)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS = (PROTOCOL = tcp (PORT = 65362))(HOST=10.10.10.1)) * establish * elesprod.eles.si * 0 +)))
  
  2. after one minute (60 seconds Timeout) we also obtain registration in alert_prod1.log
  Kills Mar 27 12:13:35 hour Central Europe 2012
  WARNING: inbound connections has expired (ORA-3136)
  
  3 and sqlnet.log
  Fatal OR connect error 12170.
  VERSION INFORMATION:
  TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
  Oracle leaves NT Protocol adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
  Adapter protocol NT Windows NT TCP/IP for Windows 64-bit: 10.2.0.5.0 - Production Version
  Time: March 27, 2012 12:13:35
  Tracing not lit.
  AMT error struct:
  NS main err in code: 12535
  TNS-12535: TNS:operation expired
  NS secondary err code: 12606
  NT main err in code: 0
  NT secondary err code: 0
  NT OS err code: 0
  Customer's address: (ADDRESS = (PROTOCOL = tcp (PORT = 65362))(HOST=10.10.10.1))
  
  The funny thing is that this connection attempts are only on node 1 (HOST1) and none on node 2 (HOST2).
  No idea what's going on?
  
  p.s.: we create "nolock" profile just for the user of the system, locking if this account is not a problem, but I want to understand, why/who/what is the pain in my a *.

  Hello

  the password for the system account has been recently changed on this computer?
  If so, then the error appears, because the WinPrvSE.exe program uses the wrong account password (and locks the account so).

  To change the password for WinPrvSE.exe program:

  ?:\> %ORACLE_HOME%\bin\operfcfg.exe
  Enter user-name: system
  Enter password: password
  Enter tns-alias: orcl
  operfcfg: New registry values have been successfully set.
  

  or you can change via. assistant administration for windows "Oracle of the counters for the snap-snap-in Windows performance monitor.

  Concerning
  Sebastian

• How to manage the connection failure of network at the service of bussiness on OSB

  Hello everyone.
  
  Thank you for your attentions. I need help with the error handling in the OSB 11 g. I have a proxy that road to a business service to check the status of the service profile. I use the java client to use the proxy service and return the results to clients. The problem that I am facing manipulation is failure of the network connection.
  
  I want to get some message (or any useful information) of proxy service to indicate that the connection to the business service is not available when the connection fails. I tried to add the management of errors, but I can't found the action from the list of options.
  
  Can you review my proxy service and tell me some resolutions?
  Any suggestion is appreciated.
  
  I thank in advance
  

  <?xml version="1.0" encoding="UTF-8"?>
  <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
    <ser:coreEntry isProxy="true" isEnabled="true">
      <ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
        <con5:wsdl ref="Test/resources/wsdl/PortalSide"/>
        <con5:port>
          <con5:name>PortalSideSOAP</con5:name>
          <con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
        </con5:port>
        <con5:selector type="SOAP body"/>
        <con5:WSI-compliant>false</con5:WSI-compliant>
      </ser:binding>
      <ser:monitoring isEnabled="false">
        <ser:aggregationInterval>10</ser:aggregationInterval>
        <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
      </ser:monitoring>
      <ser:reporting>true</ser:reporting>
      <ser:logging isEnabled="true">
        <ser:logLevel>debug</ser:logLevel>
      </ser:logging>
      <ser:sla-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:sla-alerting>
      <ser:pipeline-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:pipeline-alerting>
      <ser:ws-policy>
        <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
      </ser:ws-policy>
    </ser:coreEntry>
    <ser:endpointConfig>
      <tran:provider-id>http</tran:provider-id>
      <tran:inbound>true</tran:inbound>
      <tran:URI>
        <env:value>/Test/proxy-services/DnICT_WSDL_PS</env:value>
      </tran:URI>
      <tran:inbound-properties/>
      <tran:all-headers>false</tran:all-headers>
      <tran:provider-specific>
        <http:inbound-properties/>
      </tran:provider-specific>
    </ser:endpointConfig>
    <ser:router>
      <con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
        <con:stage name="InputProcess_stage">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
          </con:context>
          <con:actions>
            <con1:assign varName="docId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="depId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="srvId">
              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
          </con:actions>
        </con:stage>
      </con:pipeline>
      <con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response">
        <con:stage name="ErrorHandling">
          <con:context/>
          <con:actions/>
        </con:stage>
      </con:pipeline>
      <con:flow>
        <con:pipeline-node name="GetRequestInfo_pipeline_pair">
          <con:comment>Lay cac thong tin trong form search</con:comment>
          <con:request>GetRequestInfo_pipeline_pair_request</con:request>
          <con:response>GetRequestInfo_pipeline_pair_response</con:response>
        </con:pipeline-node>
        <con:branch-node type="condition" name="branching_public_services">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
          </con:context>
          <con:branch-table variable="depId">
            <con:branch name="SoTTTT">
              <con:operator>equals</con:operator>
              <con:value>1</con:value>
              <con:flow>
                <con:branch-node type="condition" name="DnICT_dept_services">
                  <con:context/>
                  <con:branch-table variable="srvId">
                    <con:branch name="DichVu_1">
                      <con:operator>equals</con:operator>
                      <con:value>1</con:value>
                      <con:flow>
                        <con:route-node name="RouteToDnICT_BS">
                          <con:context>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
                            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
                          </con:context>
                          <con:actions>
                            <con3:route>
                              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
                              <con3:service ref="Test/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
                              <con3:operation>selecttrangthai</con3:operation>
                              <con3:outboundTransform>
                                <con1:assign varName="username">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('stttt')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:assign varName="password">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('123456')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:replace contents-only="true" varName="body">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText><![CDATA[<soap:selecttrangthai       xmlns:soap="http://soapinterop.org/">
       <username       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
       <password       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
       <masohoso       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
  </soap:selecttrangthai>]]></con2:xqueryText>
                                  </con1:expr>
                                </con1:replace>
                              </con3:outboundTransform>
                              <con3:responseTransform/>
                            </con3:route>
                          </con:actions>
                        </con:route-node>
                      </con:flow>
                    </con:branch>
                    <con:default-branch>
                      <con:flow/>
                    </con:default-branch>
                  </con:branch-table>
                </con:branch-node>
              </con:flow>
            </con:branch>
            <con:branch name="SoGTVT">
              <con:operator>equals</con:operator>
              <con:value>2</con:value>
              <con:flow/>
            </con:branch>
            <con:default-branch>
              <con:flow/>
            </con:default-branch>
          </con:branch-table>
        </con:branch-node>
      </con:flow>
    </ser:router>
  </xml-fragment>

  P/S:
  
  When the connection to the business service is failure, I received this SOAP message:

  <soapenv:Envelope       xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
       <soapenv:Body>
       <soapenv:Fault>
       <faultcode>soapenv:Server</faultcode>
       <faultstring>BEA-380002: No route to host</faultstring>
       <detail>
       <con:fault       xmlns:con="http://www.bea.com/wli/sb/context">
       <con:errorCode>BEA-380002</con:errorCode>
       <con:reason>No route to host</con:reason>
       <con:location>
       <con:node>RouteToDnICT_BS</con:node>
       <con:path>request-pipeline</con:path>
       </con:location>
       </con:fault>
       </detail>
       </soapenv:Fault>
       </soapenv:Body>
       </soapenv:Envelope>

  Kind regards.
  CUONG Pham
  
  Published by: Doubt_Man on July 28, 2011 10:26

  You can add an error on the route action handler in your proxy service.

  you could investigate the $fault variable and check example what errorcode BEA... comes back.
  Then, you can decide what to answer in return... for example, create your own SOAP-fault and set your own messages.

  now the default $fault value generated by the OSB will be get back

  http://www.xenta.nl/Blog/2010/07/17/Oracle-service-bus-11g-handling-SOAP-faults/
  Maybe we can help you a bit