Recording of already used XP

Similar Questions

• Error adding attributes of Member... (3320); Alias... already used... (3306)

  Hello
  
  While he was trying to perform a cube dimension build Essbase of DRM, the following 5 types of errors occurred:
  
  #1:
  \\Record #258 - error adding attributes of Member APT41953170 (3320)
  APT41953100 APT41953170 i/o income Trading - Provided N +.
  \\Record #382 - error adding attributes of Member APT41953184 (3320)
  APT41953170 APT41953184 P on FRA T (i/o) N +.
  
  #2
  \\Record #1476 - alias P & Deb Corp. no Pub JP already used for another Member (3306)
  APT41948760 APT41948764 P on & no JP Pub Corp Deb n +.
  \\Record #1611 - alias derivatives margin already used for another Member (3306)
  APT41941629 APT41941630 derivatives margin N +.
  
  #3
  \\Record #3110 - WARNING: account only of attributes can be defined in dimensions non-comptes
  APT71032500 APT71035180 of APT71032500 APT71035553 CD accumulation over $100 K agency Excl-Provided public, N +.
  
  #4
  \\Record #3110 - shared member isn't a formula
  APT71032500 APT71035180 of APT71032500 APT71035553 CD accumulation over $100 K Excl. Public Agency -
  PROVIDED N +.
  
  #5
  \\Outline of verification errors:
  Member of \\Shared [APT41953134] above its prototype.
  Member of \\Shared [APT41953117] above its prototype.
  
  
  Can someone please suggest a possible solution for these types of errors?
  
  Thank you!

  My assumptions:

  Reviews 258 and 382 - you try to push a bad for these members. Is there a reason that part never can't go to them?

  1476 and 1611 - reviews you reuse aliases that are already affected

  Record 3110 - you pass properties accounts only to a dimension of accounts not (although what you show, never share and + hardly seem like properties accounts only). You also try to write a formula to a shared member. Really, you want to change properties for a stored Member? Why?

  The last two--you have references early, that is, the shared member is in outline before the base member. Which tells me you have a BSO here as ASO cube would be much more emphatic about this error and in fact would not allow it at all. Be careful of this condition - he can do things twisted with Essbase.

  Kind regards

  Cameron Lackpour

• Show only the colors already used in the document?

  Hello!

  Is it possible somewhere see what colors I already used when you work with a document? I think it would be nice to have the option, for example, the swatches Panel to display only colors of selected by the user so that I can come and go in my color palette of 6 to 10 very quickly. It would be kind of a 'color story '. Is it possible to somehow?

  Image--> Mode--> indexed color, then use the options to record and edit palettes...

  Mylenium

• Apple music family free 3 month subscription if a member already used

  Hello. I'll put up my family shares account specifically for the Apple's music, and I have two questions:

  1. If there is available free 3 month trial for the whole family, is the family organizer that only 'click' (eg on his iPhone) and it is available for all members? Or all of them need to click separately?
  2. What happens if a member already used this free trial version and other members had no? The whole family is charged after the first month?

  Hi varvados,

  The resources below will explain how to change your individual membership of Apple's music for a family membership and how to set up in the sharing of the family.

  Manage your membership Apple music on your iPhone, iPad, iPod touch, Mac or PC

  Move from an individual membership to a family membership

  With a family membership at Apple music, families of up to six people can enjoy all the benefits of Apple music, each with their own library. If you have joined Apple music as an individual Member, you can change to a family membership at any time. You can also switch to an individual membership if you choose. You can also attach an existing family membership.

  Join an existing family membership

  If you have an individual membership of music Apple and want to join an existing family membership, follow these steps:

  1. Disable the automatic renewal of your individual membership.
  2. Ask the organizer of the family membership you want to join invite you to join the Group.
  3. Accept the invitation to participate in a family group.
  4. After accepting the invitation, open the Apple app music and make sure that you are part of the group.

  Implement the family sharing

  After you configure the sharing of family, you can invite members of your family to join.

  Author invites people to join the family

  As long as you use both iOS 8 and later versions or OS X Yosemite and later, you can add anyone who owns an Apple ID to your family. If you have children, use these steps to create Apple ID them and add them to your group. Use the steps below to add someone who already has an ID of Apple.

  On your iPhone, iPad or iPod touch:

  1. Go to settings > iCloud > family > add family member.
  2. Enter your member of the family name or e-mail address.
  3. Follow the instructions on the screen.

  On your Mac:

  1. Choose the Apple menu > System Preferences, and then click iCloud.
  2. Click on manage the family.
  3. Click on +, then follow the instructions on the screen.

  If your family member is with you, they reach their password Apple ID on your device to accept the invitation. You can also send them an invitation, and they can accept their device. If you have more than one Apple in iTunes, you can invite all of your accounts to the group, you can share your other Apple IDs with your family purchases.

  Enjoy!

• How can I use the USRP to record a signal using its two RX ports simultaneously?

  Hello.

  I am trying to record a signal using two antenna cone. The reason that I need two antenna to cover the bandwidth (DC - 6 GHz). a single antenna covers DC - 300 MHz and the other covers 300 MHz to 6 GHz. so I need to use two RX port of USRP at the same time to record the signal. I have two questions:

  1. is this all USRP market capable of covering this frequency range?

  2. is it possible to use the two RX port at the same time to the signals of the records I described? If this is not the case, how can do?

  P.S. I have two NI2920 USRPs and two USRPs N210 in my lab.

  Thanks in advance for your time.

  Sam.

  Hi Sam,

  To answer your first question, the USRPs you can reach the bandwidth you want. There is not a USRP, to my knowledge, that can reach this range in a single device.

  Also note that you can only use RX convened for two different ports at the same time using LabVIEW and the pilot of the USRP. If you want to use the two lines of RX, you will need to run a session with a single line, close the session and then start a different session for your second RX line.

• Software re - install requires XP SP2 but I am already using SP3

  My PC crashed several weeks ago and I sent him to recover as much as possible. I was already working with WINDOW XP Pro SP3 update when the incident happened and everything worked very well. Unfortunately, I lost a few programs (Pinnacle's video editing software - Studio Plus Version 11) in the process.

  While trying to load, I get an error message that says I have to have SP2 installed upgrading to continue.  As I said, I had already used SP3 is how to reset my system after the crash.  Microsoft does support SP2 and has no practical solution.  Software is also is no longer supported and all the world wants upgrade me to the most recent (WINDOWS 7 or VISTA, new video, new hardware for video capture, editing software, etc.)

  Is it possible that I can get everything working properly (as it was previously)? The obvious answer is that SP3 should take care of it, but having the SP3 (instead of SP2) upgrade is what prevents the installation. How can I overcome the requirement for SP2 to SP3 is already there?

  Does this solve the problem you are having?

  http://Avid.custkb.com/avid/app/selfservice/search.jsp?docid=219569

• Genuine key of Windows Vista Starter DVD already used after formatting PC!

  I have a real DVD of Windows Vista Starter. It has been activated and worked very well. But after a few PC, formatting and reinstalling, it says key already used and I'll have a temporary profile with features in need!

  My copy is authentic and I have the key, but it fails to activate! ???

  Hello

  Take the option phone, skip the automatic steps, and brace yourself for a real person explain to the.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  1. open the Start Menu.

  2 in the white line (search) box, type slui.exe 4 and press enter.

  3 select your nearest store and click the Next button. (See screenshot below)

  

  4 click on continue in the UAC prompt.

  5 a local phone number should apear with a set of numbers generated by Windows and displayed on your screen under step 2: . (See screenshot below)
  NOTE: It will be a series of numbers within the 1 to 9. I just removed here for obvious reasons.

  6 call the phone number of activation chosen.

  etc etc.

  See you soon.

• Vista ultimate will not key code - accept already used said - wiped my lap top so was used. How can I reset?

  Vista Ultimate will not accept key code - already used said - wiped my lap top has therefore been used. How can I reset?

  Use phone Activation

  activation by telephone (call of the operator)
  Click the Start button
  in the search
  type
  SLUI 4
  and hit the keyfollow Enter instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?

  I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?
  my email * address email is removed from the privacy *

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
   
  Have you tried to phone activation?  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
  Or click Start and type ' slui.exe 4.  Do not meet the guests until you are asked if you want to speak to an agent.  An agent can tell you the State of the product key.
   
   

• upgrade-actvation key already used?

  This is the second major time an application reads the instructions oddly. I do not understand:, why is the function of upgrade recommending a new key request when he quite sure that I already use the button turned on? This update was to iron out the problems and recommended by the windows magazines. The reinstallation of the operating system first asked me for the key, and then when it was installed - so is not the same tone? How can I go about it that "this copy of windows is not genuine" is not the truth of the issue.help.

  Upgrading one already - troublesomemachine can cause problems even more to the surface.

  If you can get the stable machine at all, run a CHKDSK and SFC command to see if they can fix some of the problems...

  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type
  CHKDSK C: /R
  and press the Enter key
  We'll tell you that the drive is locked and the CHKDSK runs the next time he started - press Y and restart. The chkdsk command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto) - then run the SFC

  SFC - SFC System - Instructions
  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key
  Wait for that analysis at the end - make a note of any error messages - and then restart.

  run another MGADiag report and view the results.

  You want to maybe track by using the CheckSUR tool
  -http://support.microsoft.com/kb/947821
  Download the logs on your SkyDrive and post the link here
  post a new report MGADiag.

• I AM RECIVING A MESSAGE THAT SAYS PRODUCT KEY ALREADY USED?

  I HAVE PURCHED DESKTOP OF A RENTED PLACE CLEAN, IT CAME WITH WINDOWS VISTA INSTALLED AND THE PRODUCT KEY, JUST NO DISC. I FOUND A VISTA ULTIMATE ON CREGSLIST AND PURCHED, AS IT CAME WITH KEY PRODUCT AND THE DISC. I'M WORKING THROUGH SEVERAL PROBLEMS OF MINORR I'VE ACCUMULATED. AND NOW I'M RUNNING IN THIS 'PRODUCT KEY YOU TYPED IS ALREADY USED' - WHY? AND WHAT DO I DO?

  Hello

  Use the control below see if it is authentic or not

  http://www.Microsoft.com/genuine/validate/

  and this problem is with the software of craigslist, you bought separately and not from the desktop computer with vista installed on it read the information below

  you bought a desktop computer with vista installated BUT with no disc to reinstall vista

  BUT you don't have the correct product key for this office on the envelope

  Follow these tips to reinstall vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Do I need antivirus protection if I already use windows Defender?

  original title: Windows defender

  Need me anti-virus protection if I already use windows Defender. And why windows Defender stops whenever I turned off the computer?

  Defender is not an Anti Virus program, it's an Anti Spyware/Maleware program. Yes, you need an Anti Virus program to use along side of it. To answer why it turns off you must provide the details.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• That if I have already used a registry cleaner?

  I read the discussion, and I realize that there is no advantage to using a registry cleaner. What should I do if I've already used one? Thanks for the valuable information on this forum...

  Hello Lawrence_55,

  Let me first of all and it is a contentious issue, not all registry cleaners cause problems. Yes some do and the greatest consensus among users is "do not use Registry cleaners. Unfortunately, like most things, it is a case of caveat emptor (buyer beware)! Maybe the registry cleaners should come with a Government health warning!

  If you used a registry cleaner. By used, I guess he showed you had thousands of orphaned registry entries and you will have to remove them?

  Any registry cleaner worth his salt will have a recovery mode, in which case if you have problems you can restore the registry system back to how it was before the registry cleaner cleaned.

  Given that you have cleaned your system, you can check to see if there is a restore option. Default by providing the installation of registry cleaner is not in the dim distant past, you could do a system restore to a point before when you installed the registry cleaner. This, at least, will put your PC back to how it was previously.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Another question on the exception of 'Port of SMS already use' in

  I found a lot of discussion about the exception 'SMS Port already use' in. My question is this:. Say an application opens a port SMS and ends abnormally without closing. The unit will continue with the exception of 'Port of SMS already in use' up to reset the signal? is there a way to clean the orifice opened without a reset of the device?

  I need to listen to a specific port and from what I've read, even the datagram method allows one connection.

  Hi scoleman2272

  This KB article explains how to use the connection of datagram. This works for listening, the reverse is also true however for sending.

  I hope this helps.

  Concerning

• Cannot activate Windows 8 error key is already used by another pc.

  OT: Product key Windows 8.

  Hi, so I bought windows 8 pro a year ago and installed on my laptop but I recently bought a new desktop computer and gave my laptop to my sister. She didn't so I put windows 7 on the laptop for her and went to put windows 8 on my windows desktop 8. It installed fine but when I go to activate windows it says that the key is already used by another pc. Why he says this when the computer that I had windows 8 is no longer a windows 8?

  You use telephone activation. The database of activation of Microsoft still has your old laptop, saved using the key of Windows 8.

  See http://support.microsoft.com/kb/950929/en-gb