Recording of telephone Messages

Similar Questions

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• How to record a custom message / event in the virtual center of the virtual machine

  Is it possible to record a personalized message in the virtual center of the VM?

  I use a vCLI script to reset a virtual machine. I want to report where (PC) this script is launched.

  And it would be great if it is possible to report to the event list or task of the virtual machine that will be reset.

  You can relate from where and which this script is initiated by the following script

  #!/usr/bin/perl -w
  # CustomEvent.pl
  
  #
  use strict;
  use warnings;
  use VMware::VILib;
  use VMware::VIRuntime;
  
  my %opts = (
     vmname => {
        type => "=s",
        help => "Name the virtual machine associated with the event",
        required => 1,
     },
  );
  
  Opts::add_options(%opts);
  
  Opts::parse();
  Opts::validate();
  Util::connect();
  
  my $vmname  = Opts::get_option('vmname');
  my $username, my $compname;
  ($username = `echo %USERNAME%`) =~ /(\S+)/; $username = $1;
  ($compname = `echo %COMPUTERNAME%`) =~ /(\S+)/; $compname = $1;
  
  my $EventManager = Vim::get_service_content()->eventManager;
  my $EventManager_view = Vim::get_view(mo_ref => $EventManager);
  my $vm_ref = Vim::find_entity_view(view_type => 'VirtualMachine', filter => {'name' => $vmname});
  eval {
      $EventManager_view->LogUserEvent(entity => $vm_ref, msg => "CE_RESTARTVM : VM $vmname restarted by $username from $compname.");
      Util::trace(0, "\n CUSTOMEVENT \'VM $vmname restarted by $username from $compname.\' post Successfully.\n");
  };
  if ($@) {print "Error: ". $@ . "\n";}
  Util::disconnect();
  

• Thunderbird says it can't find the records that my message filters use and are present in the list of folders.

  The error message reads:

  The record [which] is not found, then the filters associated with this file will be disabled. Verify that the folder exists, and that the filters to point to a valid destination folder.

  If I manually edit the disabled message rules and try a mail run, the same error messages come up.
  

  I have the problem solved. The database of the service provider Internet Mozilla for some reason any returns the name of the server 'imap.gmail.com' when the account is set up in Thunderbird.

  Manually configure as "photoscape", and filters work very well.

• How can I stop the boot record guaranteed Tempro message?

  Whenever I start my Toshiba Satellite computer, a dialog box with the message "reminder to register Toshiba Notebook has stopped working, Windows is checking for a solution" is displayed. No solution never appears.

  I looked at the status of the guarantee on TEMPRO, where it is said that I had not yet registered to the standard warranty.
  OK, well I thought I had, but maybe I forgot or do not materialize.

  So I clicked on save, entered my details and found that in fact I HAD recorded, about a week after I bought the computer (as I thought).
  If the registration reminder program should not be run!

  It's really annoying for this next screen, especially since I tend to shut my computer down when I'm not using it so got to encouter this most of the time I start using it.
  And for some reason any the TEMPRO software did not record that I registered.

  How can I stop this?

  Hello

  Either it's something wrong with the installed Tempro tool or tool didn t notice that you are already registered for the guarantee.
  So first of all I recommend reinstalling the Tempro and upgrade to the latest version available.

  You can find the latest here on this page of Toshiba Tempro:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/TEMPRO_W7_RELEASE/

  If this is not enough, you could disable the Tempro in msconfig (enter RUN msconfig). In the Startup tab, you will find an entry tempro which you can uncheck. Save the changes and restart the device.

  This will help you get rid of this message.

  Welcome them

• Records Manager error message

  Hello

  We have recently upgraded to Records Manager of TRIM version 7.1 and that we had a few problems that I hope someone can give me some advice on.

  My colleague stop error message "the requested operation cannot be performed on a file with a mapped section open user #800704 c (8).» She is currently working on a PowerPoint file that has never been saved in the folder Manager. It is copy and paste information from another PowerPoint presentation (also not saved in the folder Manager) in this new. Whenever she's copying something a new slide and hit save this message appears. 'OK' to hit does disappear for a minute, and then it reappears again.

  A that anyone has had a similar problem? So, I am confused since no documents, she works to have links to Records Manager at all.

  Any suggestions are appreciated

  Thank you!

  Sarah

  Hello SarahECVO,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it
  http://h30499.www3.HP.com/T5/HP-Records-Manager-HP-trim-Forum/BD-p/ITRC-1015

  I hope this helps!

  Concerning

• How can I record a voice message from my iPhone 4 to my desktop?

  I will be upgrading my iPhone 4 in the next month or two.  I have a vocal recording, my mother.  She's been gone.  Is it possible that I can save this to my computer or a text or an e-mail message? Thank you! ~ Kathy

  See this-> How to save voicemails on your iPhone - Apple Support

• "Movie recording disabled" failure Message When recording HD on HDR-SR12

  We have owned a Sony Handycam HDR SR-12 for many years and have had great success. Recently, when recording of sporting event of the child, suddenly received the message, HD Movie recording disabled". On the touch screen of Handycam, indicated that there is no space left on the hard disk, that is, 0 minutes. I was surprised, but deleted some old HD videos off the hard drive and continued. The touchscreen has indicated that about 120 minutes, the space was now left on the hard disk of 120 GB. I fillmed minutes more HD video and watched the minutes of the thin runoff from 120 to 119 to 118... then all of a sudden, the minutes of the end instantly went to 0, and I got the message 'HD Movie recording Diaabled' again.

  Again I deleted some old videos and exactly the same cycle repeated itself.

  I hooked my camcorder to my computer to see how much space was left on the hard disk of 120 GB. It shows that 34 GB are free 111 GB.

  Do not know what is happening.  I contacted the Sony chat that had me to do two things.

  1. press the reset button.

  2. turn off the camcorder, remove the battery for a minute, then reinsert and power back up.

  No procedure had no effect.  The agent suggested that, somehow, we have changed the operating system on the video camera software.  It is impossible because we have never done anything other than video to your device using PMB or PMH. Before signing off the coast, we have been sent a repair link that cited a lump sum of $300 + for a person to look at the camcorder. Which doesn't make sense.

  Does anyone have an idea what is happening. We love this camera.  We would be very grateful for any ideas on how to solve this problem and to recover and record.

  Thank you very much!

  Rachedie,

  • Set the recording mode (REC MODE) in the camcorder HD AVC 5 M (LP) and check. See page # 68 of the Manual to set the REC MODE.
  • Transfer the recorded movies or pictures from the camcorder to a computer.
  • Format the hard disk of the camcorder. See page # 63 of the manual to find the steps of formatting the hard drive.

  Note: Formatting the drive will remove all files.

  If my post answered your question, please mark it as an "accepted Solution".

• Records show new messages, but there is no new messages in the folder

  I have used filters to set up the folder called application, which I used for several months now, all of a sudden I have a problem with one of this file see the new messages, but there is no new messages in the folder. I checked with my email providers email based web browsers to see if new emails have came that should go into the folder named application and none has to go into the folder of file titled application. Any ideas on what is causing this problem and how to fix it?

  Good. You can then mark the thread as "Solved" Please?
  Thank you.

• is it possible to transmit a complete record of the messages to a recipient?

  I want to pass on a complete file containing about 40 messages to another person - without having to select them and send them individually...

  Get a manager of archives such as 7-zip or ZipGenius and which allows to make an archive .zip file with the content.

• Telephone message / notifications of banner appears only not on the locked screen

  Miss me phone calls and text messages because the notifications are not popping up on a locked screen. The red flag with a number figure on Messages and I phone icons, indicating that a text or rang, but there is no pop up banners on the lock screen. In both applications is parameter to appear and bannerp-style is selected in the Notification settings. I restarted the phone and that didn't help.

  By the way, I "appear on screen locked" slipped to green. In addition, I don't have to "do not disturb" activated.

• His record game: the message says speakers not plugged

  The message says speakers not plugged.  But I have checked and re checked all three connections.  They are all solids.  But still no sound?

  Hello

   
  1. you remember changes to the computer before the show?

  2. who is the operating system installed on the computer?

  
  Perform the steps described in the article:
   
  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  
  Method 2: Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  
   
  I hope this helps.

• Telephone message during extraction

  When I click to listen to my phone messagevia Microsoft Media Player!  On my computer, I get this error C00D0FEA code?

  Hello

  I understand how it feels when you try to play something and you get an error. I would like to know more information, so that we can help you better.

  1. when exactly you get this error message?

  2. Since when are you facing this problem?

  Please quote the complete error message you receive.

  C00D0FEA: this error may have been triggered by an error in another program or a component of Windows.

  See the link below

  C00D0FEA

  Method 1: You can check the link below what similar problem to address

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/1bb18155-1614-4ad6-9e78-90bcd08deb0a

  Method 2:

  See the steps in the following Microsoft article.

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Please reply with the status of the issue, so that we can better help you.

• Sound recording play error message: disconnected from the audio jack and opens the Realtek HD audio Manager.

  Original title: his record game

  Recently, I built a new computer and its been connected via HDMI. Then one day that sounds simply stopped working, so I've updated my drivers that are digitally signed and still no idea. It is said that I unplugged the audio jack, and it evokes the strange Realtek HD audio Manager every time.

  The operating system is Windows 7 64 bit home edition. Does anyone know what I need to do to correct this little hiccup?

  Thanks for the help,

  Mac ~.

  IS TT 3TT)<>

  Hey Mac,

  You can try the following steps and check what is happening.

  Method 1:

  You can try to disconnect and reconnect the connection and check.

  Method 2:

  You can also try uninstalling and reinstalling the latest version of the sound card driver.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all packages to audio driver, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall

  d. restart the computer and check.

  You can also consult the manufacturer of the computer or the device manufacturer's Web site and install the latest version of the audio drivers.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Records of mobile messaging to a profile on a xp disk crashed to a profile on a disc of windows 7

  I have not been able to figure out how to get my current TB (win 7) to read the mail files, I had copied during a profile of TB on a xp disk has crashed. I can't use the backup/restore, because I can't launch TB on xp drive.
  I created a new local folder in my profile e-mail current and copied the contents of my old mail inside folder, but it does not appear when you open the program.
  Is there a way to copy just the files or individual files, and this folder you copy in?

  http://KB.mozillazine.org/Combining_two_profiles