Records of gel and gel comp.

Similar Questions

• I did this after intro animation effects and it was made entirely from photoshop files and my comp settings in AE is HDV 1920 x 1080 25, then I was asked to the release of the film in 1920 X 1080 MPEG H.264 NTSC 29.97 progressive, someone has an idea how?

  I did this after intro animation effects and it was made entirely from photoshop files and my comp in AE settings is HDV 1920 x 1080 square pixels 25,.

  Then they asked me out of the movie at 1920 X 1080 MPEG H.264 NTSC 29.97 progressive, someone has an idea how?

  1. to adjust for NTSC composition without affecting the report l / h.

  2 - this film must be rendered in RGB + ALPHA, and yet the mpeg does not support this definition, it seems that the record will be in the video codec animation or other.

  I am bit confused if I need to adjust the model, or leave it and set the video codec only.

  Thank you

  If you have (or get) MPEG Streamclip, which is free, you can open the anamorphic clip and resize it to 1080 true. You will be able to choose H.264 as a codec. It will be if necessary deinterlacing. Suppose that the MPEG card is a MP4 container.

  Good luck.

  Russ

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• How to record the numbers and words in the same file

  Hello:

  I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."

  Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:

  Initial position X 1000

  final position X 2000

  space 100

  But idon't know how to save the words and numbers in the same file.

  As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)

  Thank you for your attention

  Hi bitxor.

  You can use all the functions of the WriteTotext file to write strings to a file.

  Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...

  BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!

• Sound Recorder, Volume Control, and Word Pad is gone and is not found in entertainment accessories, etc.

  Original title: My Sound Recorder, Volume Contol and Word Pad is missing and cannot be found in entertainment accessories, etc. on my Windows XP computer. I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd.

  I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd using cmd or %systemroot%\system32\sndrec32.ex_%systemroot%\system32\sndrec.exe ideas would be appreciated.

  Hi nsuzann,

  1 have you made changes to your computer recently?

  2. are you all error codes or error messages?

  You can try the following steps and check if you can access Sound Recorder and WordPad.

  Method 1:

  a. go to C:\Windows\System32 and double-click sndrec32.exe and check

  If she opens the tape recorder, and then create a shortcut on the desktop

  b. right-click on sndrec32.exe and select send to desktop.

  Method 2:

  About lack of WordPad, try the following steps:

  Step 1:

  Try to launch WordPad into the run window and check.

  a. Click Start and select run

  b. type WordPad, and then click Ok

  Step 2:

  a. navigate to the following location:

  C:\Program Files\Windows NT\Accessoires

  b. right-click on wordpad.exe and create a shortcut on the desktop

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with recording / playback volume and record length

  I turned up the logging level in the in the Audio section on the Control Panel, but that sound recorder (Windows) in entertainment relit at very low volume.  My headset with microphone and speakers work very well for Skype calls, so I think that the microphone is ok.

  Also, is it possible to save more than a minute?

  Thank you

  Hello Tjansen,

  Thank you for your message.  Please, try the following steps:

  Double-click on the taskbar of the speaker icon > click on 'Options' > select 'properties '.

  Make sure that the 'Micro' and 'PC speakers' have check marks.

  In addition, ensure that your output device and Microphone are not silent by displaying the mute boxes on each category

  You can then adjust the volume coming out of your microphone with the volume slider, you can adjust the bass etc.

  To do this, click on 'Options' > select 'advanced controls '.

  With respect to the registration of more than one minute, you can follow the steps below as a workaround, or you can download a 3rd party program that performs the actions you have requested.

  Allow the recorder record silent for 60 seconds.  Click 'Edit' > 'Copy' > click 'Edit' > 'Paste' > 'Insert '.

  This will add 60 more seconds. Click on "Edit" > "Paste" > "Insert" as many times as you need. Save as a file 'model' (name it something like long record.wav)

  Then, when you want to save something for more than 60 seconds, open the long record.wav file and instructions on the existing (virgins).

  Make sure that you save the new record with a new file name.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to record music, films and messages from my external decoder and other decoder satellite tv on my computer

  How to record music, films and messages from my external decoder and other decoder satellite tv on my computer

  Hello

  I suggest you to contact the cable operator for more details.

• Record an action and assign a shortcut key F1 (Photoshop CC 2015)

  I want to record a very simple action and assign a shortcut key F1.

  I record the action and choose F1, but it does not work.

  The action works if I play but not if I press the F1 key.

  It going to be fixed?

  I use the CC 2015 (trial!) version and it is not a good sign when I think to buy it.

  Its been a while I have used a Mac, but I'm pretty sure that the BONE protects the function keys. To override the F1 on a Mac, you must hold down the "fn" key and press F1, which I think then behaves like a normal F1 press. Try to start your action by pressing fn - F1.

  It might easier to choose a shortcut different keyboard for your action.

  Terri

• I recorded annual plan and you paid every month since November 2015. But because of the pregnancy, I can't use adobe more at this time. Can I Cancel to pay after next month, or are there other ways? Please let me know.

  I recorded annual plan and you paid every month since November 2015. But because of the pregnancy, I can't use adobe more at this time. Can I Cancel to pay after next month, or are there other ways? Please let me know.

  Hello

  Please refer to cancel your Adobe Creative Cloud membership

  If you need to contact support technical assistance

  Contact the customer service

  Concerning

• How to record audio Microphone and PC?

  I've been looking for everywhere tutorials on how to do it, but don't can find videos of audition 3.

  I want to record my mic and PC audio at the same time (Yes, my PC supports "Stereo Mix").

  Thank you!

  Just hearing records everything that is given by your sound card or audio interface so you don't have to sort the parameters he who send the microphone and the audio PC to the record side of your system.

  How to do this will depend on exactly what your audio device and how you set the ranges.

  Once you have the end of the sound card put in place, the hearing is easy though.  Go to hardware edition/preferences/Audio and, if all is good on your sound card, it must appear as an option in the menu dropdown for entry 'default'.  You can also route the default output however you want to listen to things.

  A couple of points... the 'Device class' box allows you to specify the type of driver you are using.  Unless you have a specialist audio interface, it'll probably be Ms. also, the sampling frequency that you define in hearing must match what you set when you were selecting things on your audio card/interface.

  I don't want to end on a Downer, but many sound cards these days this force you to save on the thing or the other and cannot make a mixture of sources like XP and earlier versions of Windows used to offer.  Maybe that's why you keep finding tutorials for AA3.0... it was the last version designed around XP and previous versions.   I hope you're one of the lucky ones.

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• Hello, I had a sharing adobe account but I can't seem to find him. I had posted a series of record. How and or connect?

  Hello, I had a sharing adobe account but I can't seem to find him. I had posted a series of record. How and or connect?

  Hi momo,.

  Are you referring to the workspaces? This service was withdrawn on January 7, 2015. There is no way of recovering files that were not uploaded before the service pensions.

  If you are referring to a more recent Acrobat.com account, try to connect to https://cloud.acrobat.com/files.

  Best,

  Sara

• anyone successfully recording audio mic and play back on ios?

  Hey all

  I'll have a lot of annoying problems with recording audio microphone and play on the iPhone (same app works perfectly on the desktop and android)

  has anyone of you who successfully done?

  Saar

  OK, I have some answers

  Divij Kumar, thanks for the manual, but I never had the traffic jam of your swf file since the compilation of my own project with "Deployment - Apple App Store" instead of "Quick publication for the device debugging" did the trick.

  Then, the app worked fine.

  fast publication was the problem, at least in my case

  THANK YOU ALL

  BTW, registration starts a little late on my iPhone 3 g - but it's the fault of the iOS - I checked and integrated enforcement "Dictaphone" is also end. I need in my application instant record so I have a record constant buffer and I use the buttons to score points rather than adding and removing SampleEvents listeners as we all have here.

  see you soon

• 61 records are saved and applied.

  Hello
  
  When I update the value in form then it shows "61 records are saved and applied." but in fact I update only value.help me thanks in advance.
  
  Sarah

  Hi Sarah!

  If you have items with the validation list set to Yes property
  and this lovs have a column mapping property to another basetable-item in your building
  may what the status is changed after the request too, if no matching record is found in the lov.

  Concerning

• Crypt32 error recorded during gel system

  Windows XP home SP3 kept updated and regularly clean the operating system (with iolo sys mech) (Norton IS 2012 is updated and I regularly scan)

  Event ID: 8

  "Failed to retrieve auto update of third-party root sequence number in the list: with error: this network connection does not exist.

  This error continues on a regular basis, around 5 minutes outside. The main symptom seems to be a short freeze function that is mouse frozen and for example, watching a movie, the movie freezes.

  The error message and the above event ID is saved in the course of these gels although I can't seem to understand why a network connection problem has this effect with regard to the freezing.

  The movie player used when the gel is VLC, but these gels themselves at all times and not just during movies. I maybe only 3 open windows (a folder and 2 apps) when a freeze comes, they may last a minute or two and the system returns to full function after a frost.

  I will continue to try to understand what 32 crypt and if it is related to him freezes. I find it curious because I noticed only the gel in the last days and the frozen mouse was the first symptom notice, event viewer recorded the crypt 32 error every time. My short really good OS and I have problems on rare occasions and in general they have been easily corrected. I plan to replace the crypt 32. dll with a copy of a backup, I'm not sure of the effect this will however, if it does not solve the problem, it can make things worse.

  Any advice would be much appreciated

  Try to download and install the update for root certificates manually.  Go to the following site:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Jump down to the paragraph "Root Update Package (designed for Windows XP only)" and download the updated certificates root from the indicated link.  After downloading the file, double-click it to install it.  With certificates installed up-to-date, if all goes well, he don't keep trying to download all the minutes.

  HTH,
  JW