Records of work due to Windows 7

Similar Questions

• Event log Windows has stopped working due to an appcrash.

  Recently on windows problem reports and solutions, I got a note saying: windows event log has stopped working due to an appcrash.

  I went to the windows event logs and record the time and the problem. I'm relatively new to computers so I could not understand the problem.

  I find the time, this event occurred and I got a certificate service Id 64, a application Id 1000 event.

  could someone help me with this problem, thank you

  The Office of response technicians can probably help you. Click on this link-online http://answerdesk.microsoftstore.com/

  Good luck.

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Click recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... »

  I'm having a problem with Windows Media Center. It starts no problem, but when I click on recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... "If I click on TV guide there is no problem. I tried a restore, but for some reason any restore function has been disabled.

  (copy - paste from another thread - user has same question):

  
  You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
  Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target.  Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
  FIX: Open Explorer and go to C:\users\Public\Recorded TV.  Find and remove "human Target__"(exemple: «La Target_WDIVDT_2010_10_01».) ".
  Start Media Center, and then try again.  Fixed?

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• FixIt center operating system is not compatible Windows and update does not work due to 8007066

  I have an Asus Essentio with Windows 7 Professional. Although the computer was working ok, I installed the FIX It Professional [I bought it to install on my computer to girls] for the interview. Since then, I had several problems with slow MSN Mail and slow performance. I uninstalled the product and to restore the computer to the date of installation of the software. Here are some of the problems I have:

  When you try to run Microsoft difficulty It Center I get a message "the operating system is not compatible and must be XP or newer" which it obviously. I've used this program in the past without any problems and actually have a user account, but it still does not work.

  Trying to access Microsoft support told me that the software is not "enabled" even though it says it's under System properties, and the product number is not saved, even if it has been for more than 8 months.

  Whenever I click on the MSN butterfly, a security message wonder if Explorer is allowed to make changes to my computer. Not a big deal, but remember why nobody liked Vista and I would like to get rid of him.

  A Windows Update does not work due the 8007066f, who doesn't have a solution, but updated logo keeps interrupting my work.

  Thanks for any help.

  I suggest an Inplace upgrade to fix your computer.

  The upgrade in place is a tool to fix the system. Thanks to the special upgrade process, we will be able to repair the system. The upgrade in place will not affect the settings like photos, movies, documents, etc. that are saved on the computer. Although this operation will not remove or modify the files and installed programs, I suggest always that you back up important files before you do. In addition, you may need to reinstall the device drivers after this operation.

  The detailed steps are included as below:

  On-site upgrade
  ====================
  1 log on to the system first.
  2. Insert the Windows 7 DVD in the DVD drive of the computer.
  3. Click Start and select computer.
  4. find the "setup.exe" file in the DVD-ROM and double-click it.
   
  5. click on install now.

  6. When you are prompted to enter the product key, please click Next directly without entering any key. The installation wizard will prompt and ask if you confirm to install Windows 7 without the key and choose please confirm.

  7. When you get to the screen ' which type of installation you want', click upgrade to upgrade the Windows 7 system files.
   
  Note: When running the upgrade on the spot, the system will restart automatically (several times) to merge the files and programs, please leave the computer alone and does not configure it until the 'upgrade on the spot"finished. The system should start Windows 7, once it is upgraded. Once the computer is running "upgrade on the spot", you can go and leave the computer and it completes automatically.

  Let us know if that helps.

• Are there drivers for the recorder sony icd-bp150 for windows 7

  Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

  Hello sconley3.

  I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

  However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
  Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
  Plug the other end of the cable to the Microphone Jack on the computer.

  You can follow the link below to transfer files using mini cable plug.
  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

  Kind regards
  ColbyP.

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error when recording video and audio in windows 7 32-bit?

  Dear support,

  ERROR: recovery of the class factory COM for component with CLSID {632B606A-BBC6-11D2-A329-006097C4E476} failed due to the following error: 80040154

  I programmed an application based on windows using VB.net using windows media encoder 9 series for the screenshot of desktop and audio. and its working properly in windows 7 64 bit. But when it comes to the program 32 bits windows 7 will not run correctly. the reason behind this is code mentioned below

  "Encode = New WMEncoderLib.WMEncoder" when I'm creating application object get out automatically, this only happens with windows 7 32 bit os please help me to solve this problem I get 4 days struct. "."

  Hi Brice,.

  I suggest you to ask your question in the MSDN forums. We have experts who can help you with issues related to the applications developed.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

• Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product.

  Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• After 11.0 Mac Firefox update, Firefox works, but no window can be seen

  I am running OSX 10.5.2 I just upgraded to Firefox 11.0. Firefox works, but no windows are visible.

  Have you tried to delete the localstore.rdf file as suggested in the first link in my post above?

  • http://KB.mozillazine.org/LocalStore.RDF
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• my apple keyboard does not work on my windows desktop 7

  I can't get my apple keyboard to work on my Windows 7, help desk?

  If you are running Windows 7 on a Mac with Boot Camp see:

  Use your Apple keyboard on Windows with Boot Camp - Apple Support

  Otherwise it probably don't is not supported.

  TT2

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

  The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

  How did solve you this?

• HP DV6768se Mini Remote works only on Windows 7!

  Just like the title says, my mini remote control won't work for nothing, I have windows 7 ultimate. I have the ENE CIR Receiver driver installed (41645) and with this driver, the only thing that works is the button to switch to the external display. I tried to change the battery twice (was a 2 Pack of brand new) still nothing. I even tried to change a new driver ENE CIR driver (44983) which is supposed to be for windows 7.but with this driver even not that external display button will work. This remote was working find on windows vista (but everything still sucked him )

  For your model, all you need to do is to install Quick Launch Button software, CIR driver comes into it.

  Uninstall the current ENE CIR driver, and install software QLB, Win7 Upgrade guide, here, your laptop is in level 2.