Recoverable error of memory - next steps?

Hello

Over the past years, we have seen a number of alerts "Recoverable error" memory of our out-of-support PS4000.

They were a few months out and now seem to happen every month or two.  I want to be proactive and replace what needs to replace.

Error:

09/26/2016 WARNING 20:37:35 CINPS4000 SECTIONS 19.3.0 | 19.3.3. 19.3.16 | 19.3.24 memory recoverable error on CM at location 0. Initiator of the data request was (0 x 1): CPU1 | In response to the request for data was (0x7): memory controller | Data memory correctable ECC error.

09/26/2016 WARNING 20:37:40 CINPS4000 SECTIONS 19.3.0 | 19.3.2. 19.3.16 | 19.3.24 memory recoverable error on CM at location 0. Initiator of the data request was (0x0): CPU0. In response to the request for data was (0x7): memory controller | Data memory correctable ECC error.

WARNING 09 27, 2016 08:55:03 CINPS4000 SECTIONS 19.3.0 | 19.3.4. 19.3.16 | 19.3.24 memory recoverable error on CM at location 0. Initiator of the data request was (0 x 2): bridge of e/s 0. In response to the request for data was (0x7): memory controller | Data memory correctable ECC error.

WARNING 09 27, 2016 08:55:09 CINPS4000 SECTIONS 19.3.0 | 19.3.2. 19.3.16 | 19.3.24 memory recoverable error on CM at location 0. Initiator of the data request was (0x0): CPU0. In response to the request for data was (0x7): memory controller | Data memory correctable ECC error.

What exactly should I buy here?  RAM?  Should what kind of prep and interruptions of service I expect?

Thank you

Hello

You must replace the controller.   What firmware version it works?

If the active controller, so you'll want to do a reboot to switch to the passive.  Then you can replace it without any downtime.

Kind regards

Don

Tags: Dell Products

Similar Questions

  • Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

    Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

    Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

    -Dov

  • Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step is really for a solution online

    Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step really is to get an online solution and close the program, close the program. Signature of the problem:

    Problem event name: BEX

    Application name: Cloud.exe Creative

    Application version: 3.4.3.189

    The timestamp of the application: a 56702, 75

    The name of the module with the error: StackHash_0a9e

    Version of the module with the error: 0.0.0.0

    The module of time with error stamp: 00000000

    The exception of compensation: 00000000

    Exception code: c0000005

    Exception data: 00000008

    OS version: 6.1.7601.2.1.0.768.2

    Language code: 1049

    Additional information 1: 0a9e

    More information 2: 0a9e372d3b4ad19135b953a78882e789

    Additional information 3: 0a9e

    Additional information 4: 0a9e372d3b4ad19135b953a78882e789


    uninstall all cc on your computer.

    clean a http://www.adobe.com/support/contact/cscleanertool.html

    Restart your computer

    suspend your antivirus/antimalware

    Right-click on the file to install the desktop application, and then click "Run as Administrator".

  • Error, BeginingDump memory, what it is and what I can do to fixit

    Error BeginingDump memory, is what and what can do for fixit.

    before thishappend, I had a SYSTEM 32DLL error. I tried to install ADAware anti virus that worked very well.

    I just upgraded.thats when things looked wrong.

    Then I picked up a clean PC program SysTem Mechanic wich seeemed to work clear and slaughter or slowdown in the gel.

    IM back to this error.

    Thank you

    Hi, Rej123,

    Are you sure that the message is not "Beginning dump of physical memory"

    Because you used a registry cleaner and the error is returned, the next step is to completely reinstall Windows.

    I suggest that you back up your files and perform a full restoration.

    http://EzineArticles.com/?what-causes-beginning-dump-of-physical-memory?&ID=1556013

  • Should what next steps I take if the subscription was canceled despite valid payment information?

    Please, let me pay you, Adobe!

    I've updated my credit card over the phone with a representative of Adobe 5 days before my subscription of the CC was due and thought that this thing had finally been laid to rest! I was told to give him 24 hours to reflect the changes, but rather my CC membership has been cancelled by Adobe on the expiration date. I'm not sure of what has past.

    I think I spent about total 8 + hours trying to update my credit card information! I started the process weeks before that my subscription was set to expire as my previous card was also expiring. I came across errors on multiple machines, multiple browsers and saw this forum than many others had as well.

    Well, I was finally able to get a call from a representative of Adobe which was very useful and carefully unhooked my credit card details, even reading to me for verification. Then three days later... CC membership cancelled!

    Now, I should start a new subscription? Can I get my old subscription restored? I tried to honor my long commitment of the year at Adobe several times. Adobe, I would like to pay you - I have a valid card. I want to support my memory of end of contract. Please, please let me pay you, Adobe! I don't understand how you can create the best software in the world, but your customer service to make sure that people can actually pay and use it is so dismal.

    Please tell us what next steps I have to take. I'll try to reach someone via the cat again.

    Cannot afford to spend more time on this, but I have no choice. Thank you for any assistance you can give.

    Many people. It turns out that the best thing was for me to start a new subscription.

    I contacted a representative of useful Adobe via chat who told me that it was better to start a new subscription. I have to admit that I was overwhelmed by the amazing accessible software in CC but very disappointed (surprised) with the huge process of trying to update my payment information. I hope that Adobe will get this sorted out soon. Perform the payment of billing, digital companies online like Amazon and check out a breeze. Update your payment details should take about 30 seconds, not hours of skimming of the online forums, several cats with phone calls. For the majority of the CC users, their time is billable and expensive. We can afford to spend a day of work, sort of things like that.

    Adobe must match excellent customer service and ease of use with their exceptional software. It's logical. Hopefull they will get the kinks brought soon. It will be better for everyone involved.

  • My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

    My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

    Reinstall El Capitan without erasing the drive

    Make sure that you have a current backup before continuing.

    HD recovery start:

    Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

    Repair

    When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

    Reinstall OS X: Select reinstall OS X and click on the continue button.

    Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

    In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

  • Error: "error btstackserver.exe: 0x0054be37 error, 0x000001ef memory could not be read" before the shutdown.

    Original title: Btstackserver causing error computer turns off.

    It began on 15 September after downloading a video game and starts when you try to run the game, but has since broke outside to play the game, even after I uninstalled it.

    The error message that appears before the judgment reads: "" btstackserver.exe error: 0x0054be37 error 0x000001ef memory could not be read. ""
    My laptop close instantly and is unable to start for a few minutes at least. Once a blue screen occurred on startup asking to allow the troubleshooting begin, that I authorized. There is however, no solution found by the computer. I tried several solutions, including running a system defrag and cleanup and uninstall the game. As part of my laptop gets unusually hot at shutdown, I also inspected the area and cleaned the dust of him in an attempt to eliminate possible physical obstructions.
    My laptop is an Asus N61jq age of two years and I run Windows 7 x 64.
    Any help is greatly appreciated.

    After you perform a clean boot several times, I determined the problem with the Steam client set. I also seek to their site of support for similar problems and followed through the steps of support described in this page: https://support.steampowered.com/kb_article.php?ref=1274-UOHK-5653

    For now, this seems to have fixed the problem, but I'll post here if the problem persists.
    Thank you very much for the help!
  • Moving ' excluded e-mail: return of list or brochure Distribution "program for the next step

    Hi all, I'm digging through some of our programs and I noticed there are a large number of blocked contacts in a specific program with the status not ' excluded e-mail: return list of Distribution or a brochure. Delve into the documentation, I realized that this means that the contact has already received the specific e-mail. For this reason, I want to move those contacts to the next step in the program so that they can continue to be fed in bulk.

    1 - is the right thing to do with contacts with this status?

    2. is there an easy way to move contacts with this status to the next step in the program of bulk?

    In addition, we still use Eloqua9.

    Thank you

    Russ

    One solution is to filter all who may have gotten the email before sending it a step in your program with a decision rule; If they received before, proceed to the next step, otherwise, send email.

    The other is at the stage of email send in your program (you may need to contact support and have them activate this for you), but you can understand step to proceed to the other steps errors sending email or allow you to return at the same address:

  • Try to install items with purchased 14 box serial number and system does not... What are the next steps?

    Try to install items with purchased 14 box serial number and system does not... What are the next steps?

    Are you sure have a serial number from the inside of the box, or you could have a redemption code?

    Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

    What is the exact error message?

    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

    - and https://forums.adobe.com/thread/1572504

  • Hello. I bought and downloaded photoshop elements 13 today. When I tried to put in place and asked for the serial number, that I gave and then between (correctly, I checked several times) has been seems invalid. What is the next step?

    Hi there, I have bought and downloaded Adobe photoshop conductive 13 today. When you try to set up, I was invited to the serial number which, after entering, was considered invalid. The serial number is good. What is the next step, how to contact Adobe store?

    Error "serial number is not valid for this product". Creative Suite

    If that does not help, contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  • Muse PHP Diagnostic next steps

    Hi Adobe community.

    I'm relatively new to Adobe Muse and have questions about Muse PHP Diagnostics and next steps.

    I have a Muse configuration on a digital server of the ocean and who currently receive: /scripts/form_check.php

    • OK (GREEN) PHP version
    • misconfigured mail (RED)
    • Configuration of SQL (RED) problem

    Please could you give me the next steps in sorting these errors - thank you

    For forms Muse requires PHP 4.1 with sendMail PHP configured, which means a mailer running on the server.

    For synchronized text, Muse requires PHP 5.1.

  • Next step to the top of ESXi?

    ESXi has done wonders for me these past two years, but I anticipate the 32 GB of memory and the limitation of 6 core of ESXi 5 being a problem for me soon. What is the next step to the top of the ESXi 5? I'm willing to pay (I hope that's not too). What are the characteristics offer on ESXi?

    Thanks in advance

    PS - in case this is useful, my primary use of ESXi running VMs as production for my TI servers support businesses, servers web dev apps/services and sandboxes for the new and beta, OSes, software and technology.

    I am not mistaken?

    Somehow.

    VMware offers the same (ESXi) binary files with a free license and paid the license to unlock additional features. From the free version to a paid edition is just a matter of replace the key license, no need to reinstall or downtime for virtual machines. Licensing has changed a couple of times in the past, so what I tell you is on the latest version (5.1). With version 5.1 changed things considerably. Only the free license (hypervisor) is limited to 32 GB of physical memory, no other physical limits as the number of processors, cores,... apply (with the exception of the maximum value supported of course). The paid editions have a limitations on memory and are licensed per processor/socket. The cheaper edition - which may be enough for you - is an Essentials Kit, which contains 6 processor licenses and licenses for an instance of vCenter Server for up to 3 guests with 2 processors each.

    See http://www.vmware.com/products/datacenter-virtualization/vsphere/small-business.html for more details

    André

  • Can't get to get the serial number to the next step?

    try to get to the next step very frustrated?

    ?

    Hi Larslady,

    Welcome to the Adobe Forum,

    The next step after you have entered the serial number's signature Adobe ID if it is a full version of the product, upgrade, then it will ask for a serial number previous qualification.

    If you get an error message then mention for further investigation.

    Kind regards

    Baudier

  • Errors of memory to the Satellite P105-s6177

    Hi all

    I have Toshiba Satellite P105-s6177. He was showing classic symptoms of disorders of memory for months - I get random patterned like MEMORY_MANAGEMENT bsod BAD_POOL_HEADER and a few others, I don't quite remember, especially something on a page in a fault zone unpaged. He lived several reformats nothing doesn't. I ran the windows memory test and it said that I had a RAM error within seconds of starting.

    Recently, I tried to reformat since the backup drives that Toshiba came with the computer and the computer got a BSOD in the middle of the restructuring process. I tried for a few times more and get what Google tells me is a RAM error. I pulled out a piece of RAM, tried, replaced the RAM pulled the other piece, try and get errors of memory. I apologize because I don't remember the name of the specific error that I receive, I will try to provide as soon as possible.

    Basically, I cut down to either the two pieces of RAM being corrupted or virus in the BIOS, simulating a RAM error. Is there a way I can test it for a virus in the BIOS? Currently, I can not even the computer to boot, it has no operating system installed on it because of the fiasco of reformatting. The most I can do, is bring up a command prompt.

    Thank you for your time and attention.

    And why don't you try to get the new RAM module and test it? For me, it's the best thing you can do now.
    There must be some problems with the RAM addressing.

  • I bought a new Iphone 5 s of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none that I just

    I bought a new 5s of Iphone of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none I just an options to select Master card, Visa and Amex. So what should I do to continue without entering a those sections.

    This step must be completed before you can go to the next step in creating an App Store account. It is only for the purpose of verification and just incase accidentally make you an in - app purchase.

    You cannot create an App Store account without card number.

    I hope this helps.

    AppleMan

Maybe you are looking for

  • Power 2 Go

    I used Power 2 Go to copy photos on CD - R discs.  After a couple of discs, the writing process stopped at 34% and the program and the computer locked up. I could not close the program, restart the computer, or remove the CD. I had to turn off the PC

  • Is is possible to reduce the address bar size AND also delete the google search bar at the same time?

    Basically, I want to delete the google search bar that I didn't need. but when I do the address bar is getting too long.From there I want to reduce the size of the address bar, but I don't know how, does anyone know how to do this?

  • I can't access my system/run32dll.exe file... How can I get in XP service pack 3?

    In my view, a win32:funweb - K [smaller] may have damaged my sys/run32dll.exe file.  How should I do?  I removed the virus, but still cannot access my control panel.  Help, please.

  • When I click on all programs, windows won't open any of my program files.

    I haven't added any software or hardware. I just turned on the computer and noticed that the shortcuts and folders on my office everything was different. Then when I tried to do a restore Windows system says it does not recognize the name of the file

  • No usb port works

    I uninstalled the AMD Catalyst Control Center on a 500-027c HP and lost all USB drivers.  Given that only the entries USB I can't enter the computer to a previous state.  My restore disk is on a flash drive isn't an option, the USB are not active.  T