Recovering the system crashed and now just continuously reboots.

Similar Questions

• I've upgraded to Vista XP, the system crashed and now it says to install the disc so that it can be fixed. He doesn't like XP or Vista disc. How to get a copy of the Vista disk (and not an upgrade) my computer can run.

  my vista system crashed and now it asks me for my vista drive.  He doesn't like my drive to upgrade to vista, says that my XP system drive does not work either.  where I kenza a copy of vista disc that works?

  To reinstall Vista:

  You can not legally do a clean install of Vista with a Vista Upgrade disk/license.

  Reinstall XP > then go to Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's a startup repair disk, you can do:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• My system crashed and now I just get the blue screen that says to reinstall windows, when I try to use my recovery disks that it won't work.

  Is there anywhere to get a new copy of the system recovery disc for my windows vista computer.  I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows.  The recovery discs that I burned when I bought the computer do not work.  What are my options?

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  With HP normally press you F11 at startup to start the process of recovery from the recovery partition

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  If the problem persists with the recovery process, contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  or try HP support froums

  http://h30434.www3.HP.com/

• computer could not reboot after the system restore and now do not start or respond to f2 or f8

  My brother prefomed a system restore, after restoring the system, that it has restarted, however never got to the windows form.

  Then he turned the system with a difficult start, which got stuck before the windows screen.

  so after I told him trying to start with f8 during boot, this has had no response.

  then I had him find his records recovery and told him to start while now the f2 and his computer crashes when you try to find its usb devices.

  I have no idea of what is wrong and worry that it will not respond to f8 or f2 start

  Look at the top right of your keyboard.

  You can have a F-Lock key that prevents you using F2 or F8.

  See you soon. Mick Murphy - Microsoft partner

• A run the system restore, and now my Adobe Acrobat license has exceeded its limit

  I tried to restore computer because of a corrupted installation and it deleted Adobe Acrobat, since the system restore did not work, I have reinstalled the operating system, corrected and then installed Adobe Acrobat Professional of XI, entered my license and it comes up with amounts excesses of this license. I would just get the license reactivated. Any help would be appreciated. I tried to call and Adobe is closed on weekends, cat I tried but nobody came online in some time so now, try the forums as they are 24/7.

  Thank you-

  Jake

  You need to talk to Adobe, not users on the forums, because only Adobe can reactivate something on their end.   I guess the numbers increase during the work week.

• Ran the system recovery and now all my pictures are gone

  Original title: photos of lost.

  my photos have disappeared since I ran the system recovery. Can I get back them?

  Original title: photos of lost.

  my photos have disappeared since I ran the system recovery. Can I get back them?

  Please tell us exactly what you mean by "system recovery." And exactly how you did.

  If you mean the system recovery provides the manufacturer of your computer, what it does is to restore the computer to the State it is in when it left the factory. Yes, all your photos and anything else put you on the disk is gone.

• Media Player will not play mp4 or mpeg1 files. When I try the system crashes and it goes to the blue screen of death

  I'm running a quad core with 8 GB of windows 7 with office 2013 RAM.  All are clean installs.  When I try to play a video file on Media player my system breaks down and made a memory dump.  This also happens when I try and put a video in PowerPoint.  I am able to play these videos on QuickTime on the same machine.  The videos play fine on another machine of Windows 7 office 2013.  We use this system for presentations churches.

  Can anyone help?

  Hello

  1. Do you have an error message when you play this video?
  2. What Media Player do you use?
  3. Did you recent hardware or changes to the software to the computer before the show?

  I suggest using Windows Media Player, then try the following steps. This problem may occur because of codecs. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  You can refer to the suggestion made by Rohit Chettri in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Player-will-not-play-MPG-files/16145802-7e2b-4BD0-a81f-c58c54588d26

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• recently performed the system restore and now I have no internet connection

  I recently had to restore my computer and after I network and sharing Center says there is no connection available. I hit troubleshoot and diagnoses say that connection 8 - avg network filter driver-0000 box card problems. also when I try to disable my avg firewall, I get an error message saying: the specific registry key does not exist. What do I do?

  It would be useful to know why he had to use the system restore... In any case.

  Download and run the appropriate AVG removal tool
  http://www.Avg.com/us-en/utilities

  Maybe it's enough for the difficulty of access to the Internet.  If there is still a problem that run at an elevated command prompt - netsh winsock reset

  Of course, make sure you reinstall AVG or another anti-malware program.

• I just installed a new windows 7 and I've activated. the system crashed after about 3 hours of my activation. How to get back my activation and product key?

  I bought a genuine Windows 7 starter edition and installed in a system. After the activation of Windows, the system crashed about 3 hours later. now I am confused on how to install the same window with the same product key in the same system. Help, please.

  Where is "here"?

  Then just re-install the same way as you did initially.

  I don't see what your problem is...

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund if you can.

  Find my iPhone Activation Lock

  Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

  Find my iPhone Activation Lock

  Find my iPhone Activation Lock - remove a device from the account of the previous owner

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• I bought Adobe Acrobat Pro Extended 9. My laptop got crashed and now I want to install Adobe Acrobat Pro extended 9 as I have the serial number for this product. I'm not able to find the download link for this product, but there is a link to Adobe Acrobat

  I bought Adobe Acrobat Pro Extended 9. My laptop got crashed and now I want to install Adobe Acrobat Pro extended 9 as I have the serial number for this product. I'm not able to find the download link for this product, but there is a link for Adobe Acrobat Professional 9 and I download and run the program installation and entered the serial number and it shows incorrect serial number. I need fix the download link for Adobe Acrobat Pro Extended 9. Thanks in advance.

  Windows:

  Download Acrobat products | 9, 8

  Mac:

  N ° 1)

  Click on the below link, Sign In and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.

  Then click on the link below and download the installer directly mentioned in step 2.

  Step 2)

  http://trials2.Adobe.com/applications/Acrobat/APRO/9/APRO9_Mac_WEB_WWEFG.dmg

• My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  These can help:

  http://support.Apple.com/kb/HT1808

  For a Windows PC, try this http://support.apple.com/kb/TS1538

  For a Mac, try this http://support.apple.com/kb/TS1591