Recovering the Windows system does not recognize the hard drive

Computer does not recognize the hard drive when booting.  Guard gives me 1782 disk error.  Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere.  Computer was working fine this morning and then I stop when I turned it back on it was not properly start.

I have a zt3000 running xp sp3

someone please help me, thanks

Hello

Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.

Tags: Notebooks

Similar Questions

  • Windows 7 does not recognize external hard drive after the reboot

    I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

    Check if the hard drive is assigned to a drive letter in disk management.

    Click Start, right click on computer

    Click on management of

    Expand disk management

    Select your external hard drive if its posted here

    Make a right click paths and change drive letter

    Restart your computer, open the computer in the start menu and see if it shows then.

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Managing disks in Windows 7 does not recognize external hard drive

    It is a recent event. I backed up my computer only 45 days ago and it worked Ok. The same external drive has no problems with your Windows XP desktop.

    No other USB devices is facing this problem.

    Device Manager identifies the mass storage device (WD1140), as well as the USB controller.

    This utility cannot sort.
    It is not possible to change/assignment of a new letter to the reader as disk management does not identify her. I also tried to use the command-line (list disk)... the only disc that displayed is internal.

    I tried to change the USB port, without result.
    The operating system is Windows 7 Starter.

    Hello Cristian,

    I appreciate the efforts to solve the problem. We would like to know the following information form you for help to come.

    (1) what store did you run to fix the problem?

    (2) you have any software from third-party security installed on your computer?

    (3) what is the brand and model of your computer?

    You could address this issue due to a hardware conflict or if the external hard drive that you are trying to connect has virus. Prior to the resolution problems make sure that you have installed all Windows updates. Follow the steps below to solve the problem.

    Method 1: Run hardware and troubleshooting utility device.

     

    Connect the external hard drive to your computer, and then run the troubleshooter below.

    Open the hardware and devices troubleshooter.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Reinstall the USB controllers.

    You mentioned that another that this device, all other devices are detected, follow the steps to make sure that you have the latest USB drivers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

    (a) click Start, type device in the area Manager Search , then click on the peripheral Manager.

    (b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

    (c) when completed, restart your computer. Your USB controllers will automatically install.

    Method 3: Run Microsoft Safety Scanner.

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Write to us at the State of the question. If you need additional assistance, we will be happy to help you.

  • system does not recognize new hard drive

    HD has failed (WD 80 GB) so I installed a new a 250 GB WD. I checked with WD HD replacement is compatible, Dell confirms that the jury will have the biggest HD (I've updated the bios). The Bios the WD 250 HD, but when I try to load Windows XP Home Edition (SP1) I get none found after the part of hard disk initialization? Q: we told me that Windows XP SP1 will recognize not a HD 250 GB and I need to install XP SP2 or more... is this true and if so is there anyway around this problem as I only have SP1? Thank you

    Since you have a Dell, you can contact them and see if they will send you an updated XP installation disc. The alternative is to integrate SP3 into the XP SP1 support and create a new XP installation disc which will include SP3. It is not difficult.

    http://theeldergeek.com/slipstreamed_xpsp3_cd.htm MS - MVP - Elephant Boy computers - don't panic!

  • Windows 7 does not recognize my hard drive

    I took my Toshiba drive of my previous PC running Windows Vista, put it into a Dynamode pregnant and now Windows 7 wont recognize - constantly asking me to re - format the drive.

    Some utilities recognize and some say corrupted file or you save to disk

    Hi Richard,

    You connect it as an additional drive or the drive?

    Try to modify the boot menu in the BIOS to get it detected. Check the manual for how BIOS works in the computer. See the methods to solve the problem of detection of material:

    Method 1: Run the fixit:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: Check the status of the device in disk management.

    Disk Manager is a utility that manages the system disks and the volumes or partitions contained. With disk management.  You can extend the disk, reducing the drive, create other partitions, delete partitions, change the drive letter, among other things, all in one tool, and better, by using the system tool.

    Open Windows 7 or Windows Vista Start menu.

    In the Find box type diskmgmt.msc, type command then the file will appear in the box, simply click on the file to open the tool.

    Let us know if you need more assistance. We will be happy to help you further.

  • Windows 7 Starter Edition does not recognize a hard drive WD

    Windows 7 Starter Edition does not recognize a hard drive WD, I used until last month. Device Manager sees it, he sees the USB controller (it lists as a mass storage device), but I can't access the information on the hard disk, or make use of the last backup. I tried to uninstall USB drives - it is not the thing. It gets listed under disk drives.

    Thanks for the reply.

    There was no error message: the device has been recognized (listed) by the USB controller and the Device Manager, but not by the management of the disks - so I couldn't access.

    I managed to fix the problem after:

    -J' scanned the computer (DELL Inspiron) with the Safety Scanner
    -J' completely uninstalled all the software associated with an external hard drive
    -J' uninstalled the USB controllers
    -reboot the system
    -reconnected the external HD
    -After gaining access to the drive, I installed the dedicated software

    Best regards

  • Windows media player does not recognize my hard drive

    Windows media player

    Why Windows media player does not recognize my hard drive

    Hello

    1 are there any changes or updates made on the computer?

    2. do you get an error message? If Yes, what is the full and exact error message?

    I suggest to see the links and check if it helps:

    The problems of the CDs or DVDs

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

  • Seagate Free Agent Desktop does not recognize my hard drive in Windows 8

    My Seagate Free Agent Desktop does not recognize the hard drive on my new computer with Windows 8. Although I can still use it to save and transfer all the data from one to the other, I lose the functions in the menu of the Seagate such as backup and synchronization. It worked fine on my old computer that worked on Windows XP. I tried Troubleshooting compatibility mode and that did not help.

    The message in the Seagate Manager appears as:

    None of the external drives have been found. Make sure that your external drive is connected and turned on.

    [Moved from comments]

    What brand and model exactly.

  • Vista does not recognize external hard drive (LONG!)

    I bought a Terrabite Cavalry USB Mass Storage 1 unit some time around January 2009. We used it to back up my computers portable wife and daughters without any problems (it was Windows XP a Windows Vista). Shortly after, we have tried to back up my desktop computer, also running Windows Vista, but my computer does not recognize the drive into any USB port. After this attempt, we get is more willing to work on any computer. We contacted the cavalry and they replaced the drive, but we lost a lot of data since most of the files saved on my wife and daughter desktops have been deleted to clean up their hard drives.
    When I received the spare drive I backed up my computer with no problems.
     
    We moved from NC to PA in August of last year and had packed the new car. Recently, we unpacked and used to transfer ALL the photos of my wife, numbering several hundred, again with no problems. In addition, she has saved his computer using the Vista utility. Today, I made the horrible mistake of trying to back up my computer using the same player. I had completely forgotten the previous question. Yet once, my computer did not recognize the drive, any USB port used or on the tabs 'computer '. When the drive is plugged in and turned on, it will be not even allow us to display the elements on the tab 'computer '.
     
    And now, just as before, the player no longer works on my wife's computer either. THIS IS AN ESSENTIAL QUESTION! If we cannot access the drive over 500 photos of our family, covering more than 5 years are lost forever!
     
    Although I've read similar questions on this site (especially in regards to Windows XP) I can't find the one that is exactly the same problem as this.
    There is nothing wrong with my computer. Each USB port works fine. I tried other USB devices with no problems of any kind.
     
    On both computers, if you connect the external drive and the power up it starts with a light blue on the front as it is supposed to. He then became red and Windows makes the normal audio alert, as it does with any USB device plugged. On the bar, the new icon 'Remove hardware safely', says but clicking on that alone causes the computer to get ung place intil the drive is unplugged. The same is tru if we try to access the tab "Computer" in the Start Menu. The computer attempts to load the itms 'Computer' but never the completion of the task. THE TWO COMPUTER DO EXACTLY THE SAME THING! My wife uses a Dell with Vista Home Premium and I use an EMachine with Vista Home Basic. And this issue seems to happen only after using his computer to mine, not the other way around because I had done a backup on thise drive when I got last year and she just did a new now on his own.
    I wrote to the Cavalry, but received no response. They said the last time that they aren't able to recover lost data, and it is said that all over their site.
    The external drive is a cavalry model # CAXP3701PA.
    Someone please help! Pictures of our last five years (including photos of my wife of his precious Golden Retriever from puppy to now) are lost if we cannot solve this problem. It seems that the player works well, but something corrupting of the software driver. We tried again to my wife's computer o and it begins with "Download driver software for device" but then what I described before using it.
    Any suggestions would be greatly appreciated.

    Hello

    Put the disc in a real store of the computer (not the leeks and the glances at a Best Buy or other stores)
    and they can remove the drive from the case and put it in another computer to back up data
    to other media. Of course this cancels any warranty and may not work if the drive has probably
    in fact failed. Data can often be recovered since a failed drive while it's expensive.

    (The drive could be put in either your PC as a 2nd drive).

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Why my mac does not recognize my hard drive or SD cards?

    I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

    What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

    Close, then connect the mac to a power adapter, disconnect all external devices.

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    reset all external then pulls even deleted

    Once you open a session reconnect the external hard drive

    If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

    Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

    The drive appears in the list of external devices?

  • Satellite A30 - 30F does not recognize my hard drive

    Hello
    I have a laptop Satellite A30 and when I start it up I get this message:

    For Realtek RTL8139 (X) /8130/ 810 X PCI Fast Ethernet Controller v2.13 (020326)
    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM

    I think my laptop is trying to boot from LAN because that does not recognize the hard drive, but the drive is ok, I tried on another computer with problem. Sometimes, not always, and I don't know why, I can start from the CD. If I boot from the Windows XP installation disk, I can access the hard drive. I've run fixboot and fixmbr hard disk, but that does not change. The bios recognizes the hard drive. BIOS vertsion is 1.20. I tried to upgrade the BIOS, but I need to Windows, so...

    Thank you very much and sorry for my English :)

    Luis

    Hello!

    To message PXE, you can consult this document:
    http://APS2.toshiba-tro.de/KB0/TSB8A02G90000R01.htm

    I think that your HARD drive or disc HARD controller of the motherboard is faulty, but I don't know m.
    Have you checked the HARD drive with a special tool for this? The Drive Fitness Test can check the HARD drive for bad sectors or something else:
    http://www.HitachiGST.com/HDD/support/download.htm#DFT

    Take the test and post your result!

    Good bye

  • My xbox does not recognize my hard drive, but my pc detect in Device Manager.

    Well one day I had the prototype 2 for my Xbox I played it for a while then I turned it off to get something to eat and when I turned it back on this subject came up with sign in screen with no profile and when I went to the storage screen I had no storage devices listed. I took the hard drive of the xbox and it plugged into sata port in my Manager PC shows and peripheral, the hard drive is connected and a mod tool / HDD called horizon Explorer detects all my data just the way which she was left and I tried my step dads Xbox and it does not work that I can have help?
    p.s the punctuation is not very good, that is not my strong point

    Hello

    1. what version of windows operating system do you use?

    2 did you receive an error message?

    I suggest you to see link and check.

    Troubleshooting Xbox 360 hard drives

    http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-Setup/hard-drive

    I also suggest you to contact Xbox support and check.

    http://support.Xbox.com/en-us/?XR=shellnav

  • Satellite C50-B-131 does not recognize external hard drive

    I used an external hard drive to back up my data. Suddenly my laptop (C50-B-131) says it does not recognize the device. Any help is welcome. I tried to uninstall and reinstall the driver for the drive.
    Thank you

    Have you tried another USB port?
    The backup drive works on another PC?

  • Windows XP does not start, no hard drive error

    I have windows XP installed on my hard drive of 160 GB WD Scorpio Blue PATA on a DELL Latitude D600. One day, I wake up and my laptop does not start. My computer starts up, leaves POST, but the hard drive does not start. He's right there. I try pressing the buttons but it starts a sound signal, so I have to turn it off. Normally, if there is no device that my computer can boot from it displays something along the lines, "no main boot device found. Press F1 to retry boot or F2 to enter the configuration utility. "but the screen does not show anything.
    I ran chkdisk and a number of other diagnostic tools on the hard drive, but nothing helped. I have Ubuntu on a USB key and with him, I can access the files on the hard drive - all files are intact, and I can read/write without problems. It just does not start.
    How would I go about fixing this? Any help is appreciated. It is the third hard drive that has failed inside my D600 (my second WD). I've had enough of this!

    Try to use the last good known Configuration:

    http://support.Microsoft.com/kb/307852

    and see if that clears things up to the top.

    Hope this helps

    Post back if necessary

    ____________________

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Mac Mini does not recognize external hard drive

    Hello!

    I have a weird question on my Mac Mini. I have two Seagate to 8 external drives connected via USB to my Mac Mini (mid-2011 with Maverics). The discs worked well, but suddenly one of them will not be recognized by the Mac Mini.

    I connected the hard drive of my MacBook Pro and an old PC and it works fine and all files are available, but for some reason, my Mac Mini will have nothing to do with her anymore.

    It does not appear in the finder or disk utility. I unplugged the hard drive for hours and then tried to plug it back without a bit of luck. I restarted the Mac Mini on several occasions. I also tried to connect it to all the USB ports on the Mac Mini. When I connect it to the USB ports, there is no whisper sound indicating that it has started working. However, no sign of it on the Mac Mini.

    It's like the Mac Mini has decided to ignore the external hard drive, no matter what I do. Seeing this works on other devices, I'm fairly certain that the problem lies in the Mac Mini.

    I'm no expert, so any help will be very valuable for me. And if you are kind to help, please explain it to me like I'm 8 or 93 years old.

    Thank you.

    Are these drives powered independently or they depend on USB power?

Maybe you are looking for

  • Messages displays instead of contacts phone numbers

    Messages on my iPad displays almost every conversation by phone instead of by contact number. If I type the number at the top of a conversation I gives me the opportunity to add it to an existing contact, and I can navigate to the appropriate contact

  • My Favorites keep dissappearing

    Im having this problem where the bookmarks dropdown menu and toolbar bookmarks do not display ONE of my favorites. they are all still there however. When I go to disable addons as well to check and see if it's a question the addons section is never e

  • HP ENVY 15: Impossible to settle the brilliant

    Hi the problem I have is that I can't adjust the brightness of my screen. The light button (f2 and f3) when is pressed, it shows the light bar, but you can't adjust the brightness. When I go into the control panel and I'm trying to adjust the brightn

  • Problem with series Printer B110a printer - State constantly displays Idle

    Hi - I am unable to print a document from my Mac OS X 10.6.8 Version.  The printer is a HP Photosmart B110 all in one printer and has no problem in the wireless network test report.  The print job appears in the print queue, but the State remains on

  • "you already have a taste of different construction of windows live." what is this?

    When it came to the installation of automatic updates for windows I got the message "you already have a taste of different construction of windows live."What is everything?   Is it to do with the fact that recently a pack SP2 for windows vista has be