Recovery and save: an error has occurred

Similar Questions

• I can't sign my icloud account saying verification failed and an unknown error has occurred please help

  I can't sign on my icloud account, saying: "check failed and an unknown error has occurred."

  Hello buchionunwor,

  Thank you for using communities of Apple Support.

  I see that you are having problems connecting to your iCloud account. The following article provides basic troubleshooting for problems with your iCloud account.

  iCloud: Troubleshooting account

  Best regards.

• Error: "CHKDSK cannot continue in read-only mode" and "an unspecified error has occurred (766f6c756d652e63 3f1).

  I'm trying to run a CHKDSK on my hard drives. Whenever I try to do "chkdsk C:" or any other volumes (internal or external) invites of high command. I had

  "This type of file system is NTFS.

  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)

  I have three internal volumes C: D; and E:. Running chkdsk on a volume any returns "CHKDSK cannot continue in read-only mode. Run with / f on C: will check the disk (no error) is restarted. Run/f on any other volume, I had "an unspecified error has occurred (766f6c756d652e63 3f1).
  Has received the same error in recovery mode, safe mode, using the account administrator or UAC disabled.
  Also got same error when you try to chkdsk on all external hard drives.
  I have formatted my E: and ran chkdsk on an empty volume, got the same error.

  Defrag works OK without any problems. External hard disks can be verified (no error and the bad sector) to another computer (win7 pro x 64).
  My external hard drives can be ejected without any problem. But ejection always fail after running "chkdsk /f.

  This computer is win7 pro x 86.
  Installed software: VMWare workstation 7, Microsoft Security Essentials, Visual c# 2010 express, Office 2003, Daemon Tools. DropBox

  Please help me to solve the puzzle.

  Thank you
  Hello

  After some debugging, I found that the ifsutil.dll reported an exception 'divided by zero.
  Finally I found that there is a fix from Microsoft for my netbook CPU (AMD C60).
  A Chkdsk command fails with an error not specified on a Windows Server 2008 R2 or Windows 7-based computer that uses a low frequency CPU AMD
  http://support.Microsoft.com/kb/2502789
  This fix solved my problem.

• I can't save a gif that I created. I get and "an unknown error has occurred" message.

  Photoshop CC

  I tried every resolution and color. Each time the same message.

  This is a video that I have converted to animated slides.

  Help, please.

  Adobe Creative Cloud in Photoshop General Discussion>

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Satellite M30: Problems install Power Saver - fatal error has occurred

  7.0.0.3 for something Satellite M30.

  After setting up, I get a "fatal error occurred. The program took end code ox2.

  Any ideas on whats wrong?

  Hello

  I put t know exactly what's wrong, but I remember these problems might appear if the drivers, tools, and utilities are installed in the correct order.
  The installation instructions document is no doubt placed on the page of the Toshiba driver.
  I recommend that you check these documents

  But why you don t use the Toshiba Recovery CD. This CD allows you to install the operating system with all the necessary tools and drivers much faster and easier.

• Windows photo viewer - unknown error has occurred

  original title: windows photo viewer

  I use windows 7, 32 bit, Viewer photos and receive frequent and "an unknown error has occurred" when you try to rotate the images.

  Is there a patch or a fix for this annoying problem?  Many users complained about this problem, but I don't see a solution.
  Thank you

  Right-click on the file and click Open with,

  Click on the painting,

  See if you can rotate the file there.

• a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as files cpbackup

  Hello

  We have Adobe Captivate installed 8.0.0.145 Windows 7 x 64 v.

  Activate Adobe crashes with the following error: a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as cpbackup files.

  I uninstalled Adobe Acptivate, rebooted the PC and reinstalled activate Adobe - unresolved error.

  I have cleared the cache under settings, clear the cache - unresolved error.

  Please notify.

  Kind regards

  George

  
  

  The update should be available to help, updated. It is available since October 2014.

  Being administrator is not the same thing as Captivate running as an administrator that must be put in place in the menu right click on the shortcut that launches Captivate. You have restricted functionality if this is not done.

  I told you how to clear preferences, with the file Utils. First close Captivate, when you restart CP will create a new preferences folder.

  

  If you have a lot of customization that you will lose when the erasing of the preferences. To keep them, have a look at my blog:

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  Layouts folder is located in the public Documents. It is a copy of the original folder in the gallery. Same thing with the Interactions.

  

• An error has occurred. Please save your work and restart edge animate! First time I try to open the edge animate.

  I just tried to leave on a dashboard project lead for the first time. When I open the app the splash screen does NOT appear. So I press cmd - N to create a new file, it creates a black file without any action, and when I try to set the height and width of the error (an error has occurred. Please save your work and restart edge animate) appears. I tried to reinstall and it did not help. What should I do?

  Hello

  You can try the steps mentioned in the post on the forum: http://forums.adobe.com/message/6111911#6111911

  Thank you and best regards,

  Roger Simon

• an error has occurred. Please save your work and restart edge animate. -error in windows 8 after t more

  an error has occurred. Please save your work and restart edge animate. -error in windows 8 after more than months of use.

  Someone knows how to fix this? I reinstalled the software and it did not help. I rebooted the computer between uninstal and instal. Software comes from creative cloud with subscription. I'm in the middle of the project, and it is difficult to switch between computers...

  You can try opeing the file .html instead of .a project file?

  Open edge animate.

  File > Open and navigate to the project folder and select the .html.

  If successful, file > save. If successful, I would also recommend file > save to a new folder (other than the current one) as a backup location.

  HTH

  Darrell

• Trying to open Bacup and restore: "an internal error has occurred. The parameter is incorrect. (0 x 80070057) »

  When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight.

  Hello Tjohanne
  Please write to the Microsoft Forums.

  This problem can occur because of a bad sector at the end of the volume that you are trying to save.

  However, as a workaround, you can try the following methods:

  (A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D.

  Run (B). disk check to check the hard drive
  Note: Please make sure that the DVD DRIVE is the first boot device.
  1. Insert the DVD of Windows 7 and restart the computer.
  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  3. click on 'Next' and then click 'repair your computer '.
  4 Please, highlight 'Windows 7' and click 'next '.
  Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
  5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.

  C:
  CHKDSK /R

  Note: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
  6. Please let me know if an error is detected.

  C. now use another backup tool to check if you can back up files on the computer correctly.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Recovery DVD creation error - power calibration error has occurred

  Hello

  Tyring to create the recovery DVD, but after a few minutes the following message appears: Power calibration area error has occurred
  error code: 0e01b5-00037304
  Please check if dvd is scratched or dirty.

  I have already lost 4 DVDs (brand new in box)
  Y at - it another way to create recovery DVDs or is it enough if I have the recovery saved on drive D?
  Thanks for the help

  To be honest, it is a good idea to create recovery DVDs. It can happen that the HARD drive will be defective or for any other reason, you will not be able to access the saved on the second partition recovery image. If something goes wrong, you can use recovery DVD to install OS and have once again the factory settings.

  I don't know what the problem is here, but I advise you to use DVD-R virgins only. Buy TDK or Verbatim and it works well.
  Believe me, that I have created about 20 DVD recovery by always using the same media. Whenever it worked correctly.

  Theoretically, you can only have the recovery image on the second partition, but you can not install other OS. Score structure cannot be changed. Believe me it's much better to create recovery DVDs.

• Error in Photo Story 3 - "an error has occurred and should be closed. We apologize for the inconvenience. Results may have been lost.

  Original title: Photo Story 3 for windows
  try saving the photo story 3 project in order to proceed to the next time. Message that appears:

  "In Photo story 3 for w. an error has occurred and should be closed." We apologize for the inconvenience.  Results may have been lost.  You want to send a report? Yes/No"(from Microsoft). (But a response never happens). Does anyone know how to help out me?

  Hello

  You try to save the projectas a project .wp3 file or a .wmv movie file?

  Try to save the file as a .wmv file and check if the problem persists.

  To record a movie .wmv file that should play in Windows
  Media Player:
  a. After you have finished working on the project, when you get to the option "what do you do with your story.
  Select this option, "record for playback on your computer.
  b. Select a location.
  c. click Next.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store could not be started" 0x8007045A error

  I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it

  Hello Max,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You did it all change (hardware or software) before the show?
  2. You receive error message when running the troubleshooter from network?

  0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors.

  There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

  Try it out below mentioned steps and check if it helps.

  Method 1:

  Update or reinstall the Microsoft XML parser

  To download the latest XML parser, visit the following Microsoft Web site:

  http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx

  (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx)

  Method 2:

  Replace corrupted files

  To resolve this issue, follow these steps:

  1. Copy the following DLL files in the C:\WINDOWS\SYSTEM folder on a computer that runs on the computer that is experiencing the problem:
  • Msxml3.dll
  • Msxml3a.dll
  • Msxml3r.dll

  2. after replacing the files, you must save the files. To save the files, follow these steps:

  1. Click Startand then click run
  2. In the Open box, type REGSVR32 C:\WINDOWS\SYSTEM\MSXML. DLLand then click OK. You receive a message when the registration is successful.
  3. Repeat steps a and b with the following files:
  • C:\WINDOWS\SYSTEM\MSXML2. DLL
  • C:\WINDOWS\SYSTEM\MSXML3. DLL

  4 restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• I get this message error - "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

  So I had [already] CS5 on my computer. I wanted to move to the new first Pro CC. So, until I did research on the passage, I just uninstall old Adobe all files my computer to ask a table open for my new download [first Pro CC].

  I am a beginner with the 30 day free trial, then initiate the payment once the trial is over. I did everything what I had to do to install the latest version of Adobe first Pro CC.

  Whenever I click the first Pro CC icon, it starts to launch upward, and about 5 seconds and it gives me the error "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project"and stops immediately...

  I have a 27-inch iMac [2014] new nice.

  I have enough memory and ram.

  What is causing this error? For more information on this would be greatly appreciated.

  

  -Justin

  I have resolvet

  Hi Jose,

  Seems that it crashes when GPU processing.

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey