recovery disc running on my Acer Aspire 7550 laptop ran recovery.disk1 ok, disk2 collapsed after that he began to read, tried to restart only shows BOOTMGR NOT FOUND. Press ctrl + alt + delete to restart.

Similar Questions

• BOOTMGR is missing, press ctrl + alt + delete to restart

  So I found out that I have no boot disk, if windows does not start - I need to insert an installation disc that I did not. I am currently using windows vista - if I were to insert a floppy disk in windows 8, I would be able to install this later version of windows instead of Vista?

  Thank you very much

  Hi Jonathan,.

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks that you are facing a hard time while connecting to Windows Vista because of Bootmgr is missing.

  Windows Vista Bootmgr missing, I suggest to try the steps in the following article and check if it solves the problem:

  BOOTMGR is missing Press Ctrl + Alt + Delete to restart error message when Windows starts: http://support.microsoft.com/kb/2622803

  Using the Windows 8 install disc, you can perform a custom installation and install the Windows 8 operating system on your computer.

  Note: Make a backup of all data before installing.

  I suggest you to check the system requirements for Windows 8.

  Reference: http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8
   
  Install Windows 8 refer to the following steps:

  a. Insert the Windows 8 installation disc or a USB flash drive, and then turn off your computer.

  b. restart your computer.

  c. press a key when prompted and then follow the instructions that appear.

  Note * you will need to boot from your bios and change the boot order so that the DVD or USB drive are first startup options. See material manufactures instructions on how to do it.

  d. on the Windows configuration page, enter your language and other preferences and then press or click Next.

  e. in the next screen, press or click on install now.

  f. When you are prompted, type the product key in the box. Press or click Next.

  g. review the terms of the license and then select I accept the terms of the license. Press or click Next.

  h. on the type of installation that you want? Page, click Custom.

  i. on the place where you want to install Windows? The page, tap or click on drive options (Advanced).

  j. tap and press or click the partition you want to change, click the formatting option you want to run, and then follow the instructions.

  k. When finished formatting, click Next.

  l. follow the instructions to complete the installation of Windows 8, include the name of your computer and setting up an initial user account.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• 'BOOTMGR is missing Press ctrl alt delete to restart' HELP

  Recently I had to reformat my hard drive in my dell desktop case and put it in an external case plugged to my laptop running Win 7.  After saving all my files and all things somewhere else, I made a "format C:" and erased the disk now the hardrive is ironed in the DELL and when I put my XP disk in the cd drive and fire I get a "BOOTMGR is missing Press ctrl alt delete to restart' HELP

  Hello

  You try to install Windows XP on the computer?

  BootMGR is not part of Windows XP. This is the file of boot loader for Windows Vista and Windows 7.

  Method 1:

  If you try to install Windows XP, you can go ahead and try to reinstall Windows XP from the CD and check if that helps.

  http://support.Microsoft.com/kb/978307

  Note: perform a clean install only if you have no data on the hard drive.

  Method 2:

  See the article and check if that helps:

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

  http://support.Microsoft.com/kb/2622803

• BOOTMGR is compressed press ctrl + alt + delete to restart

  Hi all

  I have a HP Mini 110 - 1025DX and I tried to reset as a defaul to factory using roxio and after that the computer shows the message BOOTMGR is compressed press ctrl + alt + delete to restart.

  I have no idea what to do. I don't have the windows XP CD/DVD Installer and the laptop isn't optics dirver.

  What can I do?

  Thank you

  Alexander

  Hello, Alexander.

  Please consult the document at the link below on this particular issue.

  http://support.HP.com/us-en/document/c02510149

  Kind regards

  DP - K

• Error: BOOTMGR IS MISSING-press ctrl + alt + delete to reatart at startup.

  Original title:

  on startup, I get a black screen with the error that reads "MISSING BOOTSTRP"

  I try to open my laptop (toshiba) and I get a black screen. An error message that reads as follows: BOOTMGR IS MISSING-press ctrl + alt + delete to reatart. I followed these instructions. But the black screen and the warning message appearing.

  Hello
   
  Do you remember any changes made to the computer before the show?
   
  I suggest to try the steps in the following article and check if it solves the problem:
  BOOTMGR is missing Press Ctrl + Alt + Delete to reboot the error message when you start Windows
  http://support.Microsoft.com/kb/2622803
   
  Let us know if it helps!

• BOOTMGR is missing, press Ctrl + Alt + Delete while trying to install Windows Vista Home Premium 64 - Bit

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Hey ClockworkOtter

  You can't go from 32 bit to 64 bit

  There must be a clean install

  links below have very good tutorials on a clean install of vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  http://www.winsupersite.com/article/showcase/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista.aspx

  Walter, the time zone traveller

• CQ60-307sa watch the blackscreen BOOTMGR is compressed press ctrl + alt + delete to restart

  blackscreen watch "bootmgr compressed" does not restart... have you tried hard start several times does not contribute to any ideas\?

  Hi ceciliamaiitre,

  Welcome to the HP community! I did some research on the compressed Bootmgr error message and have found a solution for you. Click on this link and it will guide you through it.

  Thank you

• Satellite C660 - BOOTMGR is missing Press Ctrl + ALt + delete

  Heeeeeeelp!

  Help, please. My laptop Satellite 660 leads me to despair!

  Now, I know this may sound silly to some, but this worthless pile of plastic and metal means the world to me.
  Yes, it can be aged 3 years and over as a spare, but for me it is special... It was the last gift ever bought for me by my late mother.
  The sentimental value of this machine is incalculable for me (both figuratively and literally the thing f #cking does not work!).

  Please help me record.

  Where to start? Ok... I'm a techno jerk, I thought World of War Craft was a contest of world tricot for military clothing. I have prostate myself at your mercy please please help me solve this problem.
  (harp music and flash wavy landmark Visual back)
  It all started this afternoon when I noticed that my C drive was dangerously close full (like5gb spare part) while my D drive had 223 gb to spare, what I wanted instead of delete my D drive was to shrink down in size and then add the memory freed from my C drive (Ah if only things were that simple). What I found, was that I could use the system management tool to shrink the drive D, BUT I couldn't can simply transfer this memory via on drive C, then I returned to the D drive and thought that no more of it. I remember however clicking something "active partition" and there being a warning come on screen informing me that something like that could happen... Low and behold, on the next startup I get this formidable message! "BOOTMGR missing pressCtrl + Alt + Delete" oooooh what a clown shoe I was, why did I think that I could do such things with a fire or blow up the cat!
  If please mercy on this miserable fists of spam and help him see the error of his ways...
  My OS is windows 7, which was pre installed (so I have no disk backup)
  I have a Toshiba Satellite 660 with 4 GB of ram and a 500 GB hd
  I recently had the motherboard replaced after that I left it with my family and my nephew fried the original mobo... Gggrrrrr
  I don't know if this is relevant to this problem, but I found unable to get into safe mode, I tried all combinations of push and touch each function key and others and still I get the same message... Please please someone help me to solve this problem, and I'll be indebted to you for life.

  Hi guy,

  First of all, I have a good message for you: this is not a very serious matter and could be solved easily.
  I guess you cannot start the advanced boot menu by pressing F8. Fix?
  If this is not possible you need a Live example Windows PE or BartPE bootable CD
  http://www.nu2.nu/pebuilder/

  Start the laptop using the Live CD will allow you to use the command prompt where you can run some commands to rebuild the Master Boot Record.
  Using the prompt (like a black of BACK box) shows you should type this command:
  Bootrec /RebuildBcdand then press ENTER.

  Usually this should rebuild the master boot record of the hard drive and the laptop should start again the internal partition of C.

  Also, here is a useful document of Microsoft Knowledge:
  https://support.Microsoft.com/en-us/KB/2622803

• My PresarioCQ61 display: BOOTMGR is press Ctrl + Alt + Delete to restart

  My presario CQ61 NoteBook pc displays: BOOTMGR is missing Press Ctrl + Alt + Delete to restart. I have tried severally, reboot but it still shows the same thing. I tried to use the two recovery partitions in the disk and hard drive, but none works. Please, someone should advice me what to do to get my pc to work.
  Thank you

  Yes, I did the first time, but he answered the second time. Am so happy that everything is ok now. Am so grateful. Thanks for your help. I love you!

• BOOTMGR is compressed", press ctrl/alt/del to restart on a black screen

  I have a HP 110 netbook, (actually this isn't mine is my sisters) and it comes preinstalled with roxio on track, I've done a disk defrag and when I restarted it, it gave me an error just after starting saying "bootmgr is compressed", press ctrl/alt/del to restart on a black screen. HP led me to download 2 download by roxio to

  http://www.Roxio.com/go/bootmgrfix

  who has 2 downloads but some how every time I try to download the first utility it gives this error: the downloads for this update maximum limit has been reached. This is a temporary restriction. Please check in a few days. "Well, one who has answered the question for someone in this forum who was having the same problem as me was sent a link to download the Roxio back on track repair Kit, so I don't have one. but now I also need the other file on this named page back on rail Repair Kit Installation Guide, but it doesn't let me download this file either. It doesn't have a download button as did the first download, just underlined and it's right there when you click on it? It does not start any download of any kind! ... HP people directed me to this site Web for a solution step by step solve my problem.

  (http://h10025.www1.h...s&lc=en&dlc=en)

  Copy and paste into your browser and you will see what I mean. I tried to send an e-mail to roxio, but they help me with all the solutions for the problem im having... It's my laptop sisters and if she knew I had such a problem that I have she would never talk to me again. And I know that I have did nothing to provoke the question but I need these two files to repair the laptop. I would be really grateful for any advice or help that you could give me! Thank you so much, Joy

  UPDATE:

  When I tried the flash drive option, it says on the laptop it cannot load the OS? what I am doing wrong?

  and finally can I download windows xp on flash drive and download it to the laptop like that? It's okay to lose any type of files... It can be reset to factory setting if we can do that?

  Thank you very much for reading my long problems and thanks in advance for any help, anyone can give me...

  Original title: Hello World!

  Hello

  Try the following steps:

  When the system file bootmgr is compressed, it can not be used. Windows is not able to boot without loading the non compressed version of this file. If you receive an error message that the BOOTMGR is compressed press Ctrl + Alt + Delete to restart, reset the boot sector of Windows since the installation of the Microsoft Windows XP operating system.

  To do this, follow these steps.

  a. load the operating system Microsoft Windows XP CD/DVD into the optical disk drive. Follow the on-screen instructions by pressing any key to boot from the CD-ROM.
  b. go to the XP Recovery Console and select command prompt.
  c. Type fixboot and press the o button to select.
  d. Type exit to exit the command prompt and restart the computer.

  After the system restarts, the error message should not appear, and the problem should be solved.

  See: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01872275

• "Bootmgr is missing Press Ctrl + Alt + Del to restart"

  Hi team,

  Two days back my system showed an error saying something like 'no boot disk was detected or the drive failed' when I was closing my system. The next day I called a system engineer to fix the error and it says that the disk is not detected hard and added that all my data would be lost and the option is you can get the disk for recovery, so that you can get your data. Today, when I ON my system it shows "BOOTMGR is missing Press Ctrl + Alt + Del to restart". I saved all my important files in my would drive away ' and I need all the...

  Please, help me out of this error and tell me the best way to get back all my files...

  Hello

  I realize has the inconvenience that you experience with your PC, as it says BOOTMGR is missing when trying to start Windows. I will certainly help you to question.

  I want you to know that this error indicates that the boot sector is corrupted or missing.

  I suggest you to refer to the link below and check if this is useful:

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

   

  Important note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

   

  The link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. Does one know how I can uninstall client services netware fot or a way to solve this problem?

  loging on

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  It is normal and safe... Do you mean that you have not always press CTRL + ALT + DELETE to log on?

  If you * want * automatic login?

  • How to turn on automatic logon in Windows XP
  • How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7

• Equium A100-549 - reading disc error occurred press ctrl + alt + delete to restart

  Hello

  I have a laptop Toshiba Equium a100-549, about 3 years, Windows XP Home Edition.
  Everything worked very well so far. When starting my computer, I received the message:

  A disk read error occurred press ctrl + alt + delete
  I don't want to lose my data

  Please please I need some advice what to do

  Kind regards
  AGM

  > I don't want to lose my data

  Well. Everyone knows that a HARD disk problem can happen and all of a sudden you may lose all the data stored on the HARD drive.
  That is why it s always recommended to backup the data on additional HDD, DVD, etc.

  I'm not sure if this will help but try this:
  Try to boot from the disk Win XP (NOT the Toshiba Recovery disk) and press r. means repair and should start the repair console.
  The similar DOS window should open and there, you can use a command:
  CHKDSK drive/p/r

  The chkdsk command checks the specified drive and repairs or recovers the drive if the drive requires it.

  More details can be found here:
  http://support.Microsoft.com/kb/314058

  If that does not help, then you need to reinstall new OS.

• NTLDR is compressed, press ctrl, alt, delete to restart

  After a recent (12/08/11) update of Microsoft, I now get a message that says: NTLDR is compressed, press ctrl, alt, delete to restart.  That only brings back me to the same screen.  I was using Windows XP, SP3, before the crash.  I can't to anything other than this screen.  ANY IDEAS?  Buy a MAC maybe?

  Thanks for the reply. Now all I have to do is to reload all the programs that were previously installed.

• How can I fix NTLDR is missing press ctrl + alt + delete to restart in windows xp?

  I pressed ctrl + alt + delete to restart and it comes right to the same message.  How can I fix it?  I have nothing to reinstall with.

  http://support.Microsoft.com/kb/320397