recovery disc will work with the new hard drive

I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will install Windows 7 on my new hard drive? I got the info from COA. Thanks for any help you can provide.

If the new hard drive is having even or a larger size than the old, recovery disks will reinstall the factory OS on your new drive.

Thank you

Tags: Notebooks

Similar Questions

  • Satellite L655-149: recovery does not work with the new HARD drive

    Satellite L655-149

    PSK1JE

    Windows 7 Home Premium 64-bit (factory installed)

    Recovery of HARD drive on drive D (factory installed)

    My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

    I created USB Flash HARD drive recovery.
    When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

    I've updated the bios
    I loaded by default in the bios
    I changed the SATA AHCI mode to compatibility IDLE

    assistance in this regard will be highly appreciated

    Set the BIOS to the default settings and try again.

    With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

    By the way: do you use that stick of recovery for the first time?

  • Recovery disks do not work with the new hard drive?

    Hello, everyone.

    I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

    "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

    Error code: 0100-30 FC-3602-3603

    The original hard drive was a Hitachi, 320 GB SATA

    The new hard drive is a WD 500 GB SATA

    Any assistance anyone can give would be great. :]

    Thank you for your time,

    C

    EDIT: Trying to recover a Vista operating system

    For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

  • Windows 8 - recovery disks do not work with the new hard drive

    My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

    Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

  • Satellite L30: CD player does not work with the new HARD drive

    Hello

    Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

    My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

    However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

    The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

    Person not answering, so I'll do it.

    I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

    It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

  • Recovery disks will work on my new hard drive

    I bought recently a new Western Digital hard and I was wondering if I can use my recovery disks that I did on my old drive to the new drive, so it would normally be like my old drive before?

    Not quite, what you have to do is open the CD/DVD drawer, while the laptop is turned on, to leave the drawer open and tap down.

    Insert your first recovery DVDs and close the drawer.

    When look for a starting message down to bottom left of the screen that says "press the ESC key to start options" to do this, and you will have a number of choices. Go to f9 and press ENTER.

    Choose to boot from the CD/DVD-ROM internal drive and press to enter.

    Now, who will start in your first recovery DVDs. It ejects automatically when finished and ask for the other two.

    You could also simply start typing the key f9 to start upward, that you will also get the right window.

  • CC of Photoshop and Bridge CC will work with the new Windows 10 which will be released tomorrow?

    CC of Photoshop and Bridge CC will work with the new Windows 10 which will be released tomorrow?

    The update for the desktop app from creative cloud yesterday was made to support Windows 10 better.  I had no problems with her hard on windows 10 previews.  I have a lot of creative cloud Application installed on Windows 10 although I only use Photoshop.  However, I only install Photoshop CC 2014 and 2015 CC and I do not install Lightroom.  There are many questions in Photoshop CC 2015, no issues that I know seem 10 associated Windows.   Creative Cloud Desktop Application update some CC 2015 application such as illustrator, Prime Minister, others but not Photoshop. Update all installed on Windows 10 but since I do not use these applications I can not report on how while they run.   Bridge CC and CC 2014 Photos work fine on Windows 10.

    Using creative cloud | Creative Office Cloud app | Release notes

  • Will 1st gen magic mouse will work with the new Mac Mini?

    #1

    I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

    The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

  • Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

    Original title: recovery of original windows 8

    When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

    Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

    Hello Vishal,

    Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

    If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

    See the suggestions posted by Andre Da Costa replied on March 7, 2013.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

    In addition to this, see:

    Product key lost or misplaced (certificate of authenticity) for Windows

    If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

    Hope this information was useful.

  • SMU 8108 does not start with the new hard drive

    Hello

    I am currently using SMU 8108 with SMU-1062 q.

    The previous record was borken, so I had to install a new hard drive.

    The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.

    Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.

    When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.

    LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.

    I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.

    In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.

    I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.

    You said that you can't in Windows safe mode, you have installed Windows on the hard drive?  Are you able to get into the BIOS of the controller?

    If you are not able to access the BIOS for the controller, it may be due to bad RAM.  If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.

    Was your hard drive damaged through certain events, or it just stop working?

  • Satellite C650 - reinstall with the new hard drive

    Hello

    The hard drive in my C650 just died so I put in a replacement, and the problem I have is that I never create a recovery disc for my laptop.

    I tried to use the windows disk 7 I got with my desktop, but when I boot it I get the error ' A required CD/DVD drive driver is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".

    So, I downloaded the driver for chipset support page and excerpts to a flash drive. The installation detects these drivers "ICH9" on my USB, but after loading them, I always get an error ' no new deices could be found. Make sure that the driver files are correct and located on the driver installation media. ».

    I checked the bios and the new hard drive is detected without a doubt.
    Is there anything else I can do, short of ordering toshiba recovery disks?

    Thank you!

    Hello

    The message
    > ' Required the reader driver CD/DVD is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".
    say that your CD/DVD drive is not detected.
    So you need to check if the BIOS so the CD/DVD drive is listed. It should appear on the first page of the BIOS.

    If you want to boot from the disk and then switch on and you press F12.
    Usually, a menu should appear that allows you to choose the ODD (CD/DVD)
    Choose this option and try to boot from the CD.

  • Satellite C660-28 d - problem "Load driver" with the new HARD drive

    I have a Toshiba Satellite C660-28 t.

    The hard drive has failed. I called Toshiba Support who send me a replacement.

    However in the meantime I was going to put in my spare hard drive and do a fresh install of another operating system that I have a spare for (Win 7) key.

    However, I can't past the screen "Loading Drivers" as the laptop came with driver disks.
    I can't find the drivers on the Toshiba site (I tried some drivers intel which I thought were good, but he says they were not signed and all comes down to the loading screen drivers).

    I have made the recovery discs, but obviously can not use them on the new hard drive as it doesn't have the recovery partition.

    Any ideas on where I can get the proper drivers from?

    Thank you

    > I made the recovery discs, but obviously can not use them on the new hard drive as it doesn't have the recovery partition.

    If you have a recovery disk using Toshiba preinstalled recovery media creator tool, you just have to boot from that disk to begin the installation.

    More info: all the recovery disk for Toshiba Europe, models of laptops can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Satellite 1800-712 does not start with the new HARD drive

    Hello world.

    I am currently trying to install a new HARD drive in my notebook of 1800-712.
    I'm having a few trubbles as my Satellite won't start with my new HARD drive.

    I upgraded my BIOS to the latest version.
    The new HARD drive is a 40 GB Samsung.

    Any suggestions on what I need to do to make it all works?

    THX, Philippe

    Hello

    This device was shipped with 20 GB HARD drive.
    You again is 40 GB.
    I guess that the BIOS does not recognize the HARD drive because of the size.

  • e9260f: recovery disks don't recover the system with the new hard drive

    Hello

    I am installing a new hard drive in my desktop e9260f using the recovery discs, that I copied when I bought in 2009.

    -using size hard drive 1 TB

    -It will accept all 3 recovery CD then said full restoration and will ask you to restart continue.

    -for the re-start, it says 'update registry settings' then "the Installer starts services" then "installing devices" to 100%, then immediately error and said... 'installation of windows could not configure windows to run on this hardware of computers', then click 'ok', then the following error starting says "windows cannot complete the installation.  To install windows on this computer, run the Setup again. »

    What I tried then...

    -Start Windows repair... no luck

    -J' have changed the SATA contoller in the BIOS, DCIS of RAID and re-tried the recovery process of 3 disc set with the same negative results.

    "- I also know the cyberlink disk recovery utility sp44645.exe in the section downloads hp... which States.

    As you suspected him of Microsoft Support this error give AF and Windows 7 without SP1 discs.

    One of the workarounds, you already tried changing BIOS AHCI RAID. In your case, it did not help.

    When doing a clean install with a retail disk would give you the ability to load drivers before installing the OS. Using this method, you would be able to install the Intel RST drivers, but you will not have this option when using self created the recovery disc.

    You can't convert a drive AF [4K sectors] on a non - AF [512bytes sectors] drive.

    Maybe to order HP recovery disks will solve the problem.

    Or worse, you would have to buy a Windows 7 SP1 retail disk.

    Resources:

    Microsoft: Error installing Win7 on drive AF

    Seagate: Error installing Windows 7 on AF drives

    If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

  • Qosmio F10 - cannot install Windows XP Home edition with the new HARD drive

    My F10 won't boot from a hard drive and because of its obvious from the hard drive, it is definitely broken. I changed the build in Toshiba 80 GB HDD for a Toshiba hard drive with 60 GB.

    I put an Installation of Windows XP disc in the drive and press C at the start to boot from the CD. It does not start the installation, but on the contrary, he says that I have to remove the hard drive.

    Why? Is this only possible ti disc editing hard identical because there is not bios?

    HELP PLZ!

    Hello

    Your new HARD drive is recognized correctly in the BIOS?
    Check it!

    Plus when you get exactly the message installing Windows and which will be displayed exactly?

    Can try you with Toshiba Recovery disk, please?

Maybe you are looking for

  • HP Support Assistant - How can I disable start up / remove tray

    Hi, authorized HP Support Assistant to run automatically at startup and to install on the system / boot to the high plateau.  He told me when I was doing what I could disable it at a later date in the settings of the program.  But I can't find it, ho

  • PSC 1410: Prints all files

    Some correct files is printed and some files the printer will go through the motions of printing but blank paper comes out like the finished product and some files will display "grey box" parts of a document.

  • Cannot get my Satellite C50-A-157 at startup

    Hi people I have a Toshiba satellite A-C50-157, just three weeks. It wouldn't connect to the internet last night, kept saying that it was unable to display the page. Then the cursor froze and the touchpad would not answer. I have attached the mouse a

  • Safari crashing

    Safari crashes on my MacBook Pro. I heard about this problem has been fixed, but always happens on my laptop. How should I do?

  • HP Pavilion g6-1371sa cannot connect wireless Internet

    Hello Just bought a new laptop for my son, but cannot make it work wireless (he connects very well with an ethernet cable). Have been well than all the assistants of troubleshooting, but with no joy. Relevant information; Network adapter updated - Ra