Recovery disk not recognize in my Satellite M70

Similar Questions

• Satellite 5005 - recovery disk not recognized

  I'm trying files my satellite 5005-S504 but when I put the original disc, one in the computer does not recognize say 5005 series disc and is not compatible with this PC.

  Help, please!

  Can you tell us more about your laptop?
  Is this laptop your day or you have bought used?
  East - the first time that you use the recovery disk?
  Maybe is exchanged mainboard?

  In any case, visit Toshiba US page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp for assistance

  There you can find description and DMI tool how to use it. After using this tool, the motherboard will have good information. Before the start of the recovery procedure this information is compared with the information stored on the recovery image. If these two pieces of information are the same, you will be able to install the recovery image.

  Surroundings and good luck

• Satellite A50 - recovery disk not recognized

  Hello

  I have a Satellite A50 who I am rebuilding. I insert the recovery disk came with the laptop. I get a window with the message
  "This recovery and Applications CD is not configured to work with this machine (laptop). This CD is for: Satellite A50. Please use the good recovery and Applications CD".

  I'm looking at this message. I look at my laptop with Satellite A50 wrote about it. And I don't know what to do next. Can anyone help?

  Thank you... Peter

  I agree with Bob. Mobo was traded in the past?

• Satellite L450D - 11v disks not recognize CD

  Hello

  My laptop does not recognize my discs. I can hear it spinning and reading the disc but nothing happens. I know not all brands of blank discs can be read but it is not recognize anything, game discs, dvd/rw etc.

  I googled for a solution, checked to see if the driver is updated and looked into the device for all conflicts Manager and go up again without answers.

  Any suggestions?

  Thank you

  Have you tried to clean the lens?

• Re: Qosmio x 770-107 - recovery disk not recognized

  I gave up my old 3 months Qosmio x 770-107 last week and killed my HARD drive. A new HARD disk, exact replacement to order it. Ordered a DVD of recovery of this backup media site that is posted here. I entered number etc.

  Rolled up today but at the start it is not recognize at all. He sees my drive in the BIOS, and I changed the startup as well as preferences to try waiting usual f12 or whatever.

  All I get is:
  "Reboot and select proper boot device."
  Or insert boot media in selected boot device and press a key. »

  It doesn't matter what I do.

  I tried another windows 7 boot cd and it started to load files perfectly. It's infuriating after 8 days of waiting, I thought I was back in business.

  Any help?

  Thank you

  Chelm.

  Post edited by: chelmdog

  > I tried another windows 7 boot cd and it started to load files perfectly.

  This means that you can install Win7 using the original installation disc from Microsoft but Toshiba recovery disc is not recognized at all?

• It is not recognized on Toshiba Satellite M70-169 Web site

  Hello
  I have a laptop TOSHIBA SATELLITE M70-169
  I wanted to update my drivers, so I logged on the TOSHIBA site.
  The problem is that my phone is not listed on the site, there are * M70-168 * and * M70-170 * but not * M70 - 169 *.
  I tried the recognition by serial number, result: DO NOT RECOGNISED

  I tested the autodetection, and here too, the result was: DO NOT RECOGNISED.
  I am surprised that my laptop is not recognized on the official website of TOSHIBA, while I had bought in a store.

  Can someone tell me if he had the same problem and give me directions to upgrade my laptop?

  Thank you

  Satellite M70 is old enough laptop model, and I can imagine that auto detection tool doesn't properly work. Your laptop is the model European and part PSM70E number (very important for research).
  In any case, you can find all the drivers or updates manually. Follow these steps:

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  Click tracking options:
  Type of product - ARCHIVE
  Family - SATELLITE
  Series of products - M SERIES SATELLITES
  Model - SATELLITE M70 (PSM70)
  Short model No. - PSM70E
  OS - operating system

  And all of the available stuff appears there.

  If you have any other questions let us know.

• Buy recovery disks NOT working - Compaq sr2020nx

  SYSTEM SPECS:

  http://support.HP.com/us-en/document/c00749174

  ORIGINAL PROBLEM:

  Hello.  I am working on a friends Compaq sr2020nx PC where the hard drive gone bad.  The disk was diagnosed as bad that he's not INTELLIGENT diagnostics in the BIOS.  It is not available when booting from a live Linux or as a slave drive in 2 different computers running one XP Pro Windows 7 other.  The hard drive is definitely bad.  He had not burned the recovery discs before the disk leave so I ordered the recovery disc from Compaq/HP for $15.

  8

  The system came with XP MCE 2005 64-bit.  The disks that HP/Compaq let me order were the 64 Windows XP MCE SP2 recovery.  There are 3 DVD provided.  2 are recovery disks and 1 is complementary.

  The new drive is a Western Digital SATA 320 GB.

  WHAT DOES NOT WORK NOW

  With the new installed hard drive I boot from the #1 system recovery disk.  I get a message that says "no operating system installed or damaged partition.  Press 'R' to perform a full restore of the PC. »

  I press R.

  I get a message on the bottom of the screen that reads, "Preparation of partition recovery - please wait." with a progress bar under.  That completes it.

  Next message I get is 'start the PC recovery.'

  The screen then goes to the word "COMPAQ" in big red letters on the screen with a small progress red bar that scrolls under it.  (Kind of like when XP starts when you have the "XP" logo and the Green scroll bar just below.)

  COMPAQ screen remains for almost an hour before I get a blue error screen: 0x0000007B that reads something to the effect of Windows stopped to keep from harm the system runs chkdks etc...  According to HP/Compaq support pages

  http://support.HP.com/us-en/document/bph07144 I'm supposed to try to redo recovery.  Same thing is going to always ending in the Blue error screen.

  I TRIED THINGS

  That's the problem.  I can't get the purchased recovery disks to restore the system.  I tried cleaning the DVD, using a different DVD player, but always the same.  I am able to install and run Linux on the hard drive and the computer works fine.  I can install Vista 64-bit on the hard drive and it works fine.

  I checked the hard drive after you start the recovery process and it fails.  It seems that the recovery disc creates a FAT32 partition of 8.5 GB and copies on some files.  It leaves the rest of the disk unallocated as if there is never that far in the recovery process.  I tried recovery after having 1 partition and format.  The recovery disk when it is run again will create the 8.5 GB FAT32 partition and leave the rest of the disk unallocated.  I tried to create a single partition to the unallocated space, and then rallied but still not the COMPAQ screen for an hour and then fail.

  At this point I don't know what else to do.  It seems to me there is something wrong with the image discs that Compaq has sent me.  Something to do with the drivers SATA is not on it?

  Any ideas?  Thank you.

  I solved the problem by using a 200 GB IDE hard drive, I had in another computer.  The recovery disks worked fine with this drive.  There is nothing wrong with the Western Digital 320 GB disk but for some reason it wouldn't work with the recovery discs in the Compaq.  Maybe it's a SATA I vs SATA II issue or a driver problem with restore disks.

• Re: Recovery disk with non-native hdd (Satellite A200)

  I want to replace my hard drive and do a fresh install of the system. My recovery cd will work with a non-native hard drive?

  I'm totally agree qith Quad.
  Yes, the recovery disk will work even if you are using a new HARD drive ;)

• Satellite A10 - recovery disk not recognized

  I want to format my hard drive and reinstall windows xp.

  Of course, I have Toshiba A10 laptop with HDD 160g, 1 g of Ram, cd/dvd player and the restore disc (cd).

  Problem: the restore disc is not recognized by the cd player. When I insert the disc, then again, boot sequence goes to hard drive and boots from there

  What I did:
  1. check if the reader sees another s cd. Answer Yes, Yes
  2 boot sequence of the bios checked as well as toshiba consoles set up made sure it is
  in "order"hdd, lan, floppy, cdrom", (I tried other combinations starting with cd as well).
  3. I cleaned the restore disc, didn't work
  4. I ordered another set of Toshiba restore disk, which did not work either, still not recognized
  5. I bought a cd/dvd external reader believe it or not, disc starts to work in this case, I get a warning screen shows all data will be lost and asks me to click if I want to continue, when I click it says will now restart the computer and it does but comes back and goes back on the hard drive and boots from there.

  I must also add; When I switch on I get "' pxe e61 media test failure, mof outgoing intel boot agt" msg, according to my search, this problem indicates hard disk.
  but my hard drive does not work,

  Will someone give me an advice?

  If the BIOS is set to boot from the local network first, before trying to boot from the HARD drive, you will see the error PXE.

  Have you tried to clean the lens in the DVD player? Wipe with a Microfiber cloth.

  try holding down "C" when you turn on the laptop, this will make it boot from the CD.

• Toshiba do not recognize that my Satellite exists!

  Hi all

  I hope someone can help me, I bought a Toshiba Satellite almost 3 years of a national computer store and I now find that the battery is dying quickly, not a problem, I thought, I'll just pop on the site and looking for a replacement.

  Unfortunately, according to the serial number label, my laptop is a Satellite S2410-504, reference PS241E-5G7U9-EN. I searched the site and have been unable to find it.

  I found similar patterns, I know that it is possible to search by part number that I entered the part number for another Satellite and he's got a game, but a search for my part number match, nothing!

  I don't understand why Tosh recognize her, it is AFAIK a laptop UK, which was bought by a large national company and must therefore be counted by Tosh.

  Anyone know if I am missing something or my laptop is really only once? :-) The main thing I'm interested to know is what type of battery are acceptable to use in it!

  Thanks in anticipation!

  Hi Chris,

  I found the question listed below for laptops series S2410. I suggest that you compare the specifications against your current battery for compatibility.

  http://www.computerbatteries.co.UK/Gb3/m/Toshiba/Satellite-2410-small-business-serie.html

  Kind regards

• Dell DataSafe - 'Create System Recovery' does not recognize my USB flash drive

  Hello

  I just set up my new laptop Inspiron and 'Dell DataSafe Local Backup Basic Edition' pops up advising me to "Create system recovery media" restore my system to its critical failure of hard disk factory settings.

  It gives me the option to save this on a disk or a USB Flash drive.  I have a drive hard laptop "Western Digital My Passport Essential' that I would use for this, that's why I chose the option of USB Flash drive.  However, I get a message "no USB key not found.

  Can someone tell me what I need to do to store the backup recovery system on my laptop hard drive?  (I know a recordable DVD will be probably easier, but I did not and do not want to buy a bunch of them just for that!)

  Any notice received with gratitude.

  Thank you

  I think you may be stuck. It may be opposing on the hard drive because there are already data on this topic.

  You have a friend that can give/sell you a blank DVD?

  Ron

• Backlight does not turn on more Satellite M70 147

  Hello outhere.

  The backlight on my M70-147 M-series lights no more.
  First of all, I noticed that when the awakening of the laptop from the standby or hibernation mode.

  At first I thought that the screen did no more work, but when I looked closely I could still do believe the icons on the desktop remotely. So, initially, I rebooted the laptop and then most of the time the backlight will light and stay on.

  But now he did not do more, not even when I close the screen (to force the standby mode) and then open it again, the backlight won't turn on.

  I also looked at other forums and topics, what the cause could be a faulty inverter or a broken rear window.

  So can anyone with the symptoms described tell me what could be the cause?
  I am sure that everything goes well with the graphics card because when I hung on my laptop to my LCD of dads he just showed the Office from my laptop on the LCD display. Also the first time I did it after pressing Fn + F5 several times the screen of my laptop would come on a few times. But now it does not more.

  So can anyone with the symptoms described tell me what could be the cause?

  Thank you very much.

  > Can then anyone with the symptoms described tell me what could be the cause?

  For me, it looks like a faulty FL inverter.
  The FL inverter is a small part behind the frame of the screen and it controls the backlight.

  Usually the external monitor should work fine because the FL inverter affects the internal display only...
  However, the problem can be solved by the replacement of this part.

  I recommend you contact the Toshiba ASP in your country to get this part replaced

• Vista update does not work on a Satellite M70 122

  I own an M70-122, with 1, 5 GB Ram - Intel 915GM, with abt 40 GB free on the disk. Running Win XP Home.

  I tried to upgrade to Vista Home Premium. The last part of the configuration / installation, the process stops and system recovers to Win Xp.

  So despite making a check previous with the Vista Upgrade Advisor and taking into account some recommendations to delete some incompatible files.

  What could be wrong? Could you help her?
  Thank you

  Hello Visão

  Just a question: have you updated your M70 to the latest version of the BIOS? As far as I know Toshiba offers updated BIOS for all portable WXP. before you start the installation of Vista, you need to update the latest BIOS.

• Smartphone does not recognize C50 - A satellite - 1 6

  My Toshiba C50 - A - 1-6 has a problem of recognition of my smartphone.

  I connect my smartphone to your laptop using the USB cable and I have here the noise that it is connected to.
  But in the screen of Windows is not my camera.

  When I go in the folder system to check the devices it shows my phone... but I need to be there in the windows folder so I can transfer files via the usb port.

  Help, please... Thank you

  What system uses the smartphone?
  Is Android system?

  In the case of Android system you should check the settings of Android and should enable USB debugging option.

  The option could be found somewhere in the settings-> developer Options-> debugging Android

• Disk not recognize external hard...

  iMac (retina 5K, 27 inch, mid-2015

  Intel Core i5 to 3.3 GHz processor

  8 GB 1600 MHz DDR3 memory

  Graphics AMD Radeon R9 M290 2048 MB

  Yes, I know there are a lot of topics about this, but mine doesn't seem to be different.

  I took the HD of my old G5, who had died suddenly during the night and connected to my new iMac 27 "with a Dynamode caddy.

  All I get is a quick flash of recognition sometimes. It appears on my desktop for a second, during which the power light on the caddy runs about amber.

  (I clicked on the icon during this second and preview fast and frustrating, the contents of the drive until he goes again)

  I get the error message "Eject Mackintosh HD before you unplug or turn off" then he disappeared again.

  Suggestions, please?

  No chance that your old G5 death that it might have been tough guy who does not.

  Now you try to access a faulty hard drive from another computer.

  Try to replace the hard drive.

  Kim