Recovery disks do not work with the new hard drive?

Similar Questions

• Windows 8 - recovery disks do not work with the new hard drive

  My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

  Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Satellite L30: CD player does not work with the new HARD drive

  Hello

  Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

  My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

  However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

  The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

  Person not answering, so I'll do it.

  I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

  It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

• recovery disc will work with the new hard drive

  I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will install Windows 7 on my new hard drive? I got the info from COA. Thanks for any help you can provide.

  If the new hard drive is having even or a larger size than the old, recovery disks will reinstall the factory OS on your new drive.
  
  Thank you

• SMU 8108 does not start with the new hard drive

  Hello

  I am currently using SMU 8108 with SMU-1062 q.

  The previous record was borken, so I had to install a new hard drive.

  The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.

  Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.

  When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.

  LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.

  I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.

  In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.

  I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.

  You said that you can't in Windows safe mode, you have installed Windows on the hard drive?  Are you able to get into the BIOS of the controller?

  If you are not able to access the BIOS for the controller, it may be due to bad RAM.  If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.

  Was your hard drive damaged through certain events, or it just stop working?

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• DV9810us not to recognize the new HARD drive?

  Hello

  I tried recently update my HARD since the 160 GB drive it is initially supplied with due to disk failure. I installed the new HARD drive (a 160 GB, 1.5 GB/S 5400 RPM WD Scorpio Blue) and when I go to start the computer, it will display the HP logo and options before going off after less than 5 seconds. It restarts then 3 more times, before loading any bootable media that I inserted. Right now, I have an external HARD drive that I am running Ubuntu off the coast of so I can at least use the computer at the moment.

  At the BIOS screen, I'm going under Drive Diagnostics and it says IDE Device not found. I find this strange being the wrong drive I took out the laptop SATA. I inserted my Vista Ultimatex64 7 disc and when he asks an installation location, it says not found hard drives.

  The new drive is not dead either, I have hooked up to my desktop via a port SATA extra and is easily recognizable.

  You use the same drive connector in a cage and at the end of the old drive?  I saw where a new drive connector seems to be the same, but they do not work.

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• 128 - GB MicroSD card does not work with the new Clip +.

  My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

  Treats quick closing:

  The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

  A 64 GB card format works even without any problem.

  I tried to update the media in MTP and MSC mode; the problem is the same in both.

  There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

  Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

  HM.  Looks like to run CHKDSK /F on the map the problem resolved!

• Utility HP does not work with the new update of Mac software

  I downloaded the latest version of the software for my Mac and now utility HP will not work! Any advice? Thanks, Chris

  Hey Chris. Looks like you may have the old software out there which is not compatiable with the new version of Mac OS X. What I would do is a complete uninstall of the HP software you have. Let's try this:

  We will uninstall with the option 'raccoon' like this:

  1. go in Applications/Hewlett Packard / click on uninstall HP and click on continue

  2. Select your device in the left pane
  3. hold the keys Ctrl, Opt and Cmd and click on uninstall
  4. There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  5. click on continue and let it finish

  Now run a software update. Before doing the next step make sure you connect your printer to the computer through USB. Then click on the Apple in the upper left corner of the screen, then clicking on software updates.

  If my instructions don't do because here's a little video to help out you:

• My 5s iPhone camera will not work with the new color

  I don't know if it's me, but my camera iPhone 5s doesn't seem to work with the new color.  Click on the Photo and it shows a white screen. Upstairs, he says Live - Photo - and an icon of a camera.  The screen is black and at the bottom is an X and the circle for the camera.  Nothing.  Someone else?

  Can ensure you that you have authorized access to the camera of the app? on iOS, go to: settings > privacy (make sure color is on).  If this does not work, can you please send the OS version you are using?