Recovery error on the L955D-100 Satellite 00003

Similar Questions

• Error creating the collection DVD1 - Satellite P300-150

  Hello

  I am creating a recovery disk using the creator of disc of recovery for my new laptop Toshiba Satellite P300. However, at each time at halfway in the process (for dvd 1 only), it comes up with the following error:

  A power calibration error.

  Error code: 0E09B5-26-00037304

  Khusal.

  Which blank media are you using (DVD - R, DVD + R,...)?
  Have you tried a few to use blank media from different manufacturers?
  Have you installed like Nero burning software?

• How do I use the recovery folder on the HDD repair Satellite A300

  Hi all

  I have Toshiba satellite A300, model No. PSAGCE-00C006AR,.

  My operating system is windows Vista Home premium.
  Recently, I was working on battery when my system is closed.

  When I connected charger and power he found that the display shows the message (Please wait) forever and does not allow me to enter my password.
  When I press the power button to shut down my PC and reboot in safe mode, I can enter my password and connect to my PC, and however, when I connect to the PC shows only black screen with pointer and nothing more.
  Start button does not respond, the icon my computer or all other icons do not appear on the desktop.

  I did the following steps in trying to repair my PC: -.

  1 I restarted my PC in safe mode with command prompt, you try to run chkdsk/r, however I got the error message that the disk is protected and that I can demand that it runs at the next reboot. I typed Y and restart, but chkdsk does not work although I restarted 2 times.
  2 I restarted my PC and select advanced option then startup repair problem, then I got the message that no problem was found.
  3 I also tried Toshiba HDD recovery, but could not find any folder recovery although there is about 1.5 GB partition that has everything.
  4 I tried the windows complete PC Restore, but I received a message that (a valid backup not found)
  5 that my PC is come without recovery CD, so I borrowed an and restart my PC from the CD and repair selected... etc, however I got the error message that the disk is write-protected once again.

  Any advice how I can get my rear work system will be appreciated and how do I use the recovery folder on the HARD disk and avoid the write-protected message?

  Best regards
  Alaa Mostafa
  [email protected]

  Hello

  Of course I don't know what the problem is exactly, but I'm confused on a few other facts.
  The fact is that Toshiba has created the reminder that informs the user on the first day that Toshiba doesn't offer the recovery DVDs and it is recommended to create such a DVD support immediately.

  Question about you: you created this recovery media?

  The Toshiba recovery image has nothing to do with the WinRE Vista 1.5 GB partition. Partition WinRE Vista feature. On new models of laptops Toshiba recovery image is saved in folder HDDRecovery on the second partition. If touch you didn t and if you didn t change anything with partitions you should be able to install Vista using this recovery image.

  After your computer is turned on press F8 and choose the first option (if available) computer repair. You can enter the Vista System Recovery Options. The last option should be Toshiba Recovery. If you didn t change anything, this option will be available.

  Check it out!

• IDE #1 ERROR at the start of Satellite Pro 2100 Series

  Hello... I'm an IDE #1 ERROR displayed at startup of the computer. My CD/DVD player does not seem to be recognized (in the Device Manager the drive is not displayed) and certainly does not at all. I have installed a new CD/player player, this is the original factory supplied.

  In addition, another clue is when I press one of the dvd control buttons on the front of the pop window - next up will appear:

  "The setting of the drive in Toshiba controls is false. If the audio and video control buttons do not work. Please select the correct drive letter.for the internal CD/DVD drive.

  However on the drop-down list there is no drive letter for choose!
  Any help would be gratefully receieved. Thank you, Matt

  HI Matt,

  It seems that your IDE controller is damaged. To ensure the safety of reading, you should recover the laptop with the Toshiba recovery Image and if the failure is on a new system of fees, the IDE controller is bad!

  It may be possible that only the IDE cable is loose, but to kow that it would be better to put the laptop to a Toshiba Service partner!

  To bye daniel

• Recovery error in the definition of theme 'Halo '...

  Hi dude!

  I use flex4 and I tried to put the halo theme by selecting project-properties-flex compiler-> in the text field, I added"

  -theme=${flexlib}/themes/Halo/halo.swc

  "... but I am getting error like"could not resolve mx controls"... do procedure of any s think I wan to fallow?

  You try to set the properties of Flash Builder? If so there is a property pages of the project for the selection of a theme.

  -Darrell

• Win operating system could not start because of the error in the software on the Satellite A85-S107?

  Windows did not start because of an error in the software. Please report this problem as:
  Load needed DLLs for kernel.
  Please contact your support person to report this problem. »

  A blue screen is suddenly pop up when I was surfing on a Web site, the warning above in black and white was shown after that I took the battery and restart windows.
  I thought it was just a simple step if I got the recovery disk, but I was wrong.

  The recovery procedure was very well finished 100%. But after pressing a button, the above kept warning appears, no matter how many times I had reinstalled by the recovery disc or (each time 100%) or by using the full version of Windows Xp.

  Nor he worked by the formatting of the HD I connected with a link IDE2USB for laptop XP of my friend, nor modify another HD.

  I excluded the problem with HD, so I guess maybe it's that the BIOS has been hacked (?) I downloaded the update of the BIOS to see if it works or not?
  but the result was disappointing. IT just stop at step 4 of the procedure of updating, it freezes just to flash initiating step.

  I want to remove the CMOS battery for a few seconds, but I'm not that pro and I could cause damage caused by improper handling.

  Could someone tell me what happens to my computer and how do I show this problem?

  Hello Wai

  If your device has trouble after that recovery image installation is probably hardware related issue. You can enter the settings of the BIOS as usual? If this isn't the case, I fear that the BIOS chip is damaged. It happen if BIOS update is interrupted shortly matter the reason may be.

  Removing the CMOS battery doesn t work like on desktps. Forget it!

• Re: Satellite A210 - Setup Toshiba Vista Recovery error

  Hello

  Last February, I bought Toshiba Satellite A210. Yesterday, I had to reinstall the system to obtain the original factory using CD DVD recovery setting. I followed the step shown on the display until I came to the scene "Format partitions. Start to copy No 1/5 to 4/5 things that I forgot the name, what happened to copy and suddenly I get an error saying that it could not copy data or an error of data redundancy check failure and "Please press any key to continue" and I press a key to continue, and suddenly the cmd window disappeared.
  I realize it was shown another cmd window on the bottom, and when I maximize the window I don't see is something like

  X:\widowns\system32

  I didn't understand what I need to do. If I restart the system and do same thing again and I get the same error.
  First of all, I thought that my HARD drive is perhaps a foul on him so I used my one other original cd of Windows Vista to install Vista to see if my HARD drive is correct.

  During installation, I see 4 partition and one of them saying WinRE. In any case, I have install my vista. But I need original cd data recovery, so I can install the driver.

  Then later, I tried to use DVD CD-recovery and I get the same error I describe above.

  Does anyone know what was wrong?
  It is very difficult to call from the night to the Toshiba Help Center so I will try to get an answer in this post.

  Thank you for reading my post.

  Kind regards
  MTN

  Hello

  I got my A210 laptop several times and had this problem once.
  In my case the black cmd window appeared and I didn t know that I have to do.
  So I closed that window and nothing happened.
  Now, I know that I have to leave everything until the installation process would end.

  But listen buddy; you said that you have installed the Vista using an original DVD of Microsoft Vista. Well well, in that case you n t need the recovery DVDs for the Toshiba driver installation.
  All need Vista drivers are available on the European driver Toshiba page.

  Check the driver page, select your model laptop, then you should get all the necessary drivers for Vista!

  Good bye

• Need advice on the recovery CD and Vista upgrade on Satellite M100-222

  I want to share my problem to get some tips. I got a laptop Satellite M100-222 Windows XP and Vista capable, then I got an upgrade to Vista and it works with few problems that do not recognize some programs.

  That's why I have some needs and need your help and support and they are as follows:
  1 - is possible to reformat using the upgrade of Vista, or need to reformat with XP first and then update with Vista.
  2 - I tried several times to start the CD, DVD (product recovery) to reformat the laptop. However it is said (operating system not found).

  Kindly enlighten me.
  Concerning

  With regard to the point;

  (* 1) * If you ONLY upgrade Vista CD, then it s necessary to start the first restore XP CD, and then upgrade to Vista.

  (* 2) * usually start from the CD/DVD recovery must format the HARD drive and need to install the new image of Toshiba. Please check if you have started since the right recovery CD! Don't mix it with the Express Media Player recovery CD!

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• Drive HARD on Satellite L750-22Z recovery error

  Hello

  I tried to do HARD drive recovery. It was fine until instaliation. And after the 1% error message (1117) maybe someone knows what is a problem?

  How do I recover HARD drive without errors L750-22Z?

  > How to HARD disk without errors L750-22Z recovery?
  Very interesting question. If the recovery image is ok there is no reason for the message error.

  Did you create the recovery disk?
  If so try to install the recovery image using the recovery disk.

• Satellite L - drive HARD recovery error

  Hello

  If someone could help? I tried to run the hard drive recovery, but he got the following error message.

  Error: F3-FF00-0006
  Unable to get the ID of the specified partition.

  If you know all the keys to enter the hard disk again pls let me know. I tried to enter the Recovery Wizard, but the system continues to operate a diagbostic or something. Ask me to insert the network cable and then also requires a boot disk and keeps current and on. I tried to restart, but it's the same...

  see you soon
  NOx

  Hi nox,

  Strange what s...
  You also have a Toshiba Recovery disk? If so, try it please. Perhaps only something is wrong with the HDD recovery procedure.

  In the worst case, it s associated with RAM or HARD disk as Akuma writes. So download these special testing tools! :)

• Satellite SA50-110 - IDE #1 error after the insertion of a new CD/DVD drive

  Hey there!

  I have a Toshiba Satellite SA50-110 portable psa50e.
  I have built in a new dvd driver and after I restarted my laptop

  I get the message IDE # 1 and I can't use the driver. I read in some forums that I probably need to update my bios. I do it. But the error continues.
  Can anyone help please?

  I am that all readers of optical discs aren't for each laptop model. The problem is: assignment of pins. Therefore, it is very important to use compatible hardware components.

  In my case the problem is compatibility.
  With the SA50-110 Satellite, what can I use?

  Sorry for the long talk and bad English :-)
  Thank you

  Help please

• Satellite L670 - 143 - drive HARD recovery error

  Hello

  For some time, I want to reinstall my version of Windows 7 Home Premium 64 - bit on my Toshiba Satellite L670-143.

  Only, the problem is, whenever I try to follow the following steps:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm or
  http://APS2.toshiba-tro.de/KB0/HTD7C02140000R01.htm

  He says that the "HDD Recovery" plan on the post of second on the first disc is missing.

  Help?

  Hey,.

  To me it sounds like that HARD drive recovery files are deleted or missing then, how do you want to start the installation of HARD drive recovery?
  Usually, you can do this in the advanced Windows (F8) boot menu and choose fix my computer. After loading some files, you should be able to choose the Toshiba HDD recovery option.

  It it doesn t work you must have the Toshiba recovery disc but you don't create it?

• Satellite X 200 - 1AA - after recovery, I have the older version of BIOS?

  I've recently updated the BIOS of my Toshiba Satellite X 200 1AA with Windows Vista SP! After a few days, I did a product recovery using the recovery CD. When the recovery is performed, the BIOS back to the previous version?

  Hello!

  No, the BIOS don't go back to the previous version. The Toshiba Recovery disk contains factory settings of software on your laptop and not the BIOS. The BIOS has nothing to do with the software on your laptop.

  So Don t worry, the recovery disk doesn t touch the BIOS and you still have the new version.

  Good bye

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.