Recovery media creator no go

Similar Questions

• Impossible to uninstall Toshiba Recovery Media Creator

  Hello

  I can't seem to uninstall Recovery Media Creator every time I try to uninstall I seem to get a red x error message with the error code (-5005: 0 x 80070002),.

  I think that this has been caused by the system restore, it can removed a file in the folder of the Trusted Installer, I tried literally everything I know but can't seem to remove it.

  I got my recovery so I tried to remove it because of that and bothers me like when I can't remove a program, I have no idea how to manually remove programs but I have a little knowledge with systems operating so if theres any advice on that would be great.

  Kind regards
  Kaya90

  Visit the Toshiba download page, download and reinstall Toshiba Recovery Media Creator. I hope this will solve your problem and then do what you will be able to remove it.

• No recovery Partition - question Recovery Media Creator

  Somehow, I don't have a recovery partition on my hard drive but have Toshiba Media creator on my desk?

  Images below:

  No recovery Partition? :

  + The message was edited: no labour relations have been removed.

  Hello

  It seems that the recovery media creator software is always installed, but the HARD drive recovery partition has been deleted from the HARD drive.

  This is why the recovery media creator can't access the HARD drive recovery partition.

  What to say. In this case, you will not be able to create the recovery media :(

  But you can order this disc from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Reinstall upgrade WIN8 on Satellite L870 - Toshiba Recovery Media Creator

  Hello

  I did the upgrade from WIN 8 on a laptop Toshiba L870-156. The upgrade is OK, but I have no more creative media recovery Toshiba, as the upgrade procedure, said he should be desinstalled before upgrading and reinstalled after the upgrade.

  I have a big problem: where can I find a Toshiba Recovery Media Creator to reinstall?

  In advance thank you.

  Hello

  The Toshiba Recovery Media Creator can be used only with a system pre-installed (in your case of Win 7).
  The recovery media Creator allows you to create pre-installed image recovery disc.

• NB200 - Recovery Media Creator and drive HARD USB

  I just bought a white NB200 and noticed that it does not come with a DVD of Windows 7 in case I ever need to install.
  I was informed by the seller in the store I could save a copy on a USB key using a recovery disc writing.
  I assume that "Recovery Media Creator" is the best way to do it.

  I booted up and it said that it will be 6.7 GB. I don't have a USB this size, but have a portable hard drive (250 gb) with 120 GB to spare.
  Even though I can view the drive in Windows Explorer / workstation, the program of recovery media says ' Please insert a USB drive with greater than 6.7 GB memory ', whenever I click on the create"" button.

  If anyone can help?

  Hello

  I doubt that you can use the USB HDD to create a recovery disk image.
  The Toshiba recovery disc creator has been designed in order to create a bootable recovery disk!
  It has not been designed for sure the image of Toshiba on the HARD drive!

  So if you want to use the Toshiba recovery disc creator then you must buy a USB CD/DVD drive that can burn the recovery image on a DVD

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Re: L50 - B Satellite - 2 2 - where to find "Recovery Media Creator"?

  L50 - B satellite - 2 2.
  preinstalled Windows 8.1

  Where can I find the "Recovery Media Creator"?
  I found a description how to use but none where to find...

  Paul

  Start please help Desktop > support & recovery > and you will find the recovery media creator.

  You can also find if you use search option.

  Check it out please.

• Satellite L855 - 12 X: how to use BD - RE with TOSHIBA Recovery Media Creator

  Hi all

  My question is about the progress of the Recovery Media Creator.
  I was about to create the recovery and I noticed that there are several options (DVD 4.7 GB, DVD 8.5 GB and Flash memory).

  My Toshiba Satellite L855 - 12 X with a Blu - ray burner disc drive and I would use a BD - RE, I bought for backups.

  Does anyone have a solution to use this media?

  I guess that Blu - ray discs are not supported by Recovery Media Creator.
  As you said: the 4.7 GB DVD, the 8.5 GB DVD and USB Flash memory stick options are available.

  I think the 16 GB USB flash memory stick would be the best choice

• Recovery Media Creator does not create system recovery discs

  Recently purchased Toshiba Satellite C660-21Z and tried to create recovery discs, as recommended. Recovery media creator fails systematically on disk #1 and #2 with error messages when posting:

  Failed to read E:\sources\boot.wim (error Code 020150-20-00000000).

  Have tried different types of DVDs without success. Anyone able to help?

  Hello

  Check it please THIS thread and I hope you find the solution to this.

  Good luck

• Is it possible to download the Toshiba Recovery Media Creator?

  Hello everyone,

  I have a question on the Recovery Media Creator. Is it possible to download it from toshiba.com? Because I can't find it here... I deleted from my computer cell, just thought that I should not use anyway. But now I have to install a second time to remove stuff from my laptop.

  Hope someone can help me here,

  Robin.

  Hello

  To my knowledge, this is not possible because the Toshiba recovery disc creator is part of the image of Toshiba and it can be used only in connection with the files of images available from Toshiba.

  If you would like to format the HARD drive and install the Win 7 OS own then Toshiba image files would be unavailable and the Toshiba Recovery disk Creator will not work.

• NB 300 - error when using TOSHIBA Recovery Media Creator

  I wanted to create a media recovery since the purchase of my NB300 but when I use the TOSHIBA Recovery Media Creator, once the State comes to halfway it comes up with an error:

  Differences where found in the following files.

  The source path:
  D:\HDDRecovery\SWImg\10758XSP3. STORMWATER MANAGEMENT

  Target path:
  E:\ZZImg\10758XSP3. STORMWATER MANAGEMENT
  (Error code: 02016F-3 c-00000000)

  Can someone help me with this problem

  Any help is appreciated
  Thank you in advance

  I found a similar question on the Toshiba U.S. forum > click HERE.

  I also think that the recovery files are corrupted and you need is original Toshiba recovery DVD.
  Is that you get to laptop with OS preinstalled and you should be able to create recovery discs. Try to contact the closest service Toshiba and explain the situation. If you didn t change anything on the system is not your fault and maybe you will get the discs for free.

• Recovery Media Creator and USB

  I try to use "Recovery Media Creator' loading on a 16Gig USB drive.
  The program insert me a greater than 12 Gig USB flash drive ask what I do.

  He said while the drive will be formatted and then comes up with "Format Failed (Error Code: 040E49-04-00000000)" and the USB key becomes illegible. Using disk of Windows & tool management I can then format the drive and use it becomes usable with the exception of "Recovery Media Creator".

  I formatted in FAT32, NTFS and exFAT, but none does.
  I tried two USB flash drives, both the same behavior.

  As far as I know, there are no partitions on the disk and I used successfully "Recovery Media Creator" on one of the disks in the past. I want the files to restore another computer, something I've done successfully before.

  I can burn data using DVD but the DVD did not work so I want to try the USBs. I have read some threads in this direction but have not found the answers to date. I'm sure that there is a simple explanation but I'm not.

  Usually, the creation of recovery using the USB flash key support should work fine.

  I read in some other threads that the preinstalled anti-virus software could cause similar problems... so I recommend you to disable the antivirus and other security software... so this should work

  Other guy says that delete the partition entirely and create a new simple volume would also work.

• Portege Z930 - question of Toshiba Recovery Media Creator

  Hello
  I have a toshiba portege z930 pt234e with Windows 7 Professional
  I have connected the external optical drive and has worked fine
  But when I installed the Toshiba Recovery Media Creator, the external optical drive disappeared
  When I open the box drive HARD Toshiba Recovery Media Creator, shows, no. recovery!
  I want to do a system recovery disc

  Hello

  The Recovery Media Creator is a tool of Toshiba which requires Toshiba image files to create the recovery disk. The image files are placed on a different partition called recovery of HARD drive partition.

  If the HARD drive has been changed or deleted this partition, the recovery media creator will not be able to find image files and you will not be able to create this disc.

  So my question is: you reinstall Windows 7 at your own hand? Did you change the HARD drive in the past?

• Recovery media creator does not recognize the USB 32 GB on Satellite L750?

  I hope that there is someone here who can help you:

  My computer is a computer L750 x 64 based Satellite and the problem is that the sound disappears after a few seconds, when I hear the music from Youtube.

  I read in the preinstalled usermanual can I restore the computer pressing F8 when the computer starts, but it does not work.

  The continuous computer just on Windows 7.
  Now I want to restore the computer to the factory standard and will therefore use the Recovery Media Creator but it does not work.

  I want to save data on a 32 GB USB key, but it will not recognize the stick.
  I know that 32 GB is without error, because I can easily store / retrieve data either with FAT and NTFS systems.

  What I am doing wrong and is there anyone who has a good idea, so I can spend?
  best regards Erik

  Even if your USB is working correctly outside of the recovery media creator, this does not mean that it should be handled properly by this tool.

  I had problems creating recovery DVDs even though I was able to burn video files on the same disk.
  As far as I know you must take at least 16GB USB flash memory stick
  Usually, this should work.

  But I m wondering why you are not able to use HARD drive recovery option. Have you changed anything on the HARD drive?

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• No on Satellite R830-182 TOSHIBA recovery media creator

  I just bought a R830-182, whenever I start it, "TOSHIBA Recovery Reminder" appears to tell me to run "TOSHIBA Recovery Media Creator", however, no similar application does seem to exist anywhere on the machine. Any ideas where I can find it?

  Thank you
  b.

  It should appear in the start menu > all programs > Toshiba. Either in this case or in public services.
  Please review and send comments.