Recovery of Satellite A215 after replacing the hard drive

I have a Satellite A215 from issues taken to a store, they said the hard drive was going wrong, they extracted the files it could.
I replaced the concert of 80 hitachi Moose with a new concert of 500 hitachi. When I try to launch the boot disc that came with the computer it says loading windows then goes to a recovery mode and I can't function.

Any suggestion would be appreciated. Thank you

At this point, it would be interesting to know if the same thing would happen with 100 GB HARD drive. Do you get the such or similar HDD somewhere for testing purposes?

It's that you can't manipulate image recovery and recovery installation procedure. Either it works or not.
To be honest, I'm a little surprised by your upgrade. I can't imagine that a small car can work with stronger engine 10 times. What do you think?

Tags: Toshiba

Similar Questions

  • Windows XP cannot be installed on Satellite A30 after replacing the hard drive

    Hello
    you have a problem with my satellite A30 - hard drive has been corrupted (due to accumulation of dust on the cpu!) and I replaced it with a 100 GB hard drive.
    Tried the 'recovery cds', but get an error message 'error #1537 file greater than 4 billion number' and recovery has been abandoned halfway after inserting the third cd. The XP Home operating system does not install completely. Any suggestions?
    Thank you very much for your help, has soon
    NJ

    Hello

    already tried the recovery process more then once? If so, the error appears at the place of installation? You said that you have installed a new hard drive but actually you have formatted the hard drive before you perform a full restore? That would be really helpful, sometimes recovery is suspended because the disk formatted or partitioned before luckily.

    You should really try. One way would be to use the "UBCD4Win' which is a Windows Live CD with really good tools. Format your hard drive with this CD and retry the recovery. Maybe it works...

    Here´s the link to the CD "UBCD4WIn": www.ubcd4win.com ".

    Bye and good luck

  • System Restore to factory settings after replacing the hard drive?

    I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

    Thank you

    After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

    You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

    Lenovo - call to order recovery disks:
    http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

  • How can I reinstall windows 7 after replacing the hard drive?

    How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

    Well, that certainly puts a different point of view on this subject.

    There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

    If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

    http://support.Microsoft.com/kb/326246

    Tom Ferguson

  • Cannot access through desktop remote after replacing the hard drive

    After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

    Hello

    I appreciate the efforts that you put to publish the query on this forum.

    I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Please do not hesitate to contact us if you have other questions related to Windows.

  • Restore questions after replacing the hard drive

    I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

    Hello

     
    Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved

    You can check out the link and check if it helps:
    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
     
    If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
    Restore your computer from a system image backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

    Also check out the link:

     
  • Problems with folder permissions after replacing the hard drive

    Hello

    Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

    drwxr-x - 13 501 501 442 5 July 2013 MG

    Any help would be greatly appreciated!

    Running OS X El Capitan

    10.11.4 version

    Try this first:

    Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

    When this does not help:

    Reset password utility in the recovery Partition:

    1. Restart your computer from the recovery partition.
    2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
    3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
    4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
    5. Exit the utility password and return to the main recovery menu.
    6. On your keyboard, press + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.
  • Cannot open my files money 2005 after replacing the hard drive

    Hi, I had to replace the hard drive in my computer and now I am unable to open my money (Version 2005) files. I get an error message indicating "Money cannot locate C:\~~~ or cannot open it, possibly because it is a read-only file or you are not allowed to change it or your hard drive, it is write protected etc.» I tried uninstalling and re-installing the money, but it has not solved the problem. The problem may be to do with the regional settings during installation of money, but when I re - install the money it is not giving me the option to set the perameters during the installation process for a reason any. My OS is XP Home edition Service Pack 3. How can I solve this problem?

    So your real problem is not that the files are missing or read-only, but that the money does not recognize the format the files are in.

    Even if you reinstalled Money, maybe you don't have also downloaded and installed some updates have been released for your version.  See http://support.microsoft.com/kb/320193:

    If you are using Microsoft Money 2005, and you receive this error message after you have reinstalled Money, the behavior may be caused by not having money is not all installed updates.

    See methods 4 and 5 in the article.

    If this does not help, Veritas Aquitas had the right answer: ask in the forum of the money:
    http://social.Microsoft.com/forums/is/money/threads

  • Failed to retrieve after replacing the hard drive on my DV6

    I replaced the hard drive on my DV6.  Insert the recovery discs, I had done and went through the process.  At the end it rebooted and was told that he failed.  Says to put 1 recovery disc in and try again, but just a loop even message.

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

    Windows 7 Home Premium 64 bit SP1.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • This copy of Windows is not genuine after replacing the hard drive

    Hello, I bought a copy of windows 7 Home. My hard drive crashed. replaced the hard drive, now it tells me that windows is authentic noty. How can I fix it?

    So that we can analyze and solve a problem of non-genuine notification you can experience, download and run it Microsoft Genuine Advantage diagnostic tool . 

    After you run the tool, click on the button continue, then click on the copy button, then paste the report into your post.  In addition, please include a brief question or relevant information that might be helpful in our efforts to help you.

    Thank you!

    Carey Frisch

  • Error: 150:30 after replacing the hard drive

    After replacing my hard drive of Apple iMac (Apple remember), I get an error code 150:30 when trying to open Photoshop CSCS4. Spin OSX 10.11.1

    All solutions?

    John

    150:30 errors mean that the licensing mechanism is broken, usually because the software moved instead of being re-installed.

    Uninstall, reinstall from the disc or download then enter your serial number.

    Download the CS4 products

  • How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

    My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

    Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

    Once you have the disks, install in the usual way.

    Tom Ferguson

  • Failed to load a backup disk after replacing the hard drive.

    Until I replaced the hard drive, I backed up everything on a disc using the Vista backup program. Now I am trying to get at the way it has been, but I don't know how. Help?

    Start, programs, accessories, System Tools, backup status and Configuration.

  • Reinstalling Windows 8 (or 10) after replacing the hard drive

    I need to replace the hard drive on my Inspiron 13-5323.  It came with the factory "injected" Windows 8 on the motherboard. Subsequently, I've upgraded to 8.1 Windows, then Windows 10.  With no Windows disk and no product key, how can I reinstall Windows on the new drive?

    Illinichip

    The product key is embedded in the UEFI BIOS, it will automatically be entered with Windows 8.1 (with update 2 media) or Windows 10 TH2 installation media. Follow the instructions here to download and create a Bootable USB (for UEFI BIOS):

    https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

    http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  • no boot device after replacing the hard drive

    Hello world!

    My laptop (MSI) has erupted recently in my face (Fried GPU seems).  As I had and liked (Acer laptop) which had a broken hard drive, I have supported up to my datas and replaced the hard drive of Acer (one broken) with that of my MSI (latest laptop)

    When I start the computer I get the message no bootable device: "no boot device - insert boot disk and press any key any."

    I am not very savvy computer science, but I feel that it is perhaps due to the version of Windows I was using: my Acer running on Windows 7, when my MSI will run on window 8.  Could someone confirm if this has something to do with the startup problem?

    Here's what I managed to do or find on the problem.

    When I go into the BIOS, I changed the order of precedence so that my hard drive is the first priority.

    There is absolutely no USB or SD card in my computer from where he might try to start (unless he's trying to start from an empty?).

    The BIOS is able to tell me the model and I installed the hard disk MSI series so I guess that it is able to detect the hard drive, but can not find startup data in it (that's why I think it's maybe because it isn't the same window).  In addition, the hard drive lights up when I start the computer (and he did it on the MSI laptop too).

    Even if the hard drive seems to be detected, I always tried to unplug and reconnect it a few times to make sure it wasn't just a matter of bad connection.

    On many web sites, they recommend taking any diet and empty any current computer before restarting: unfortunately I can not do because the Acer laptop has a battery that is not easily accessible as newer computer (it cannot be removed from the outside, I need to open the laptop to get it and it is so I can know what it look like and how to remove it)

    My brother managed to recover data from hard disk of MSI with a USB device that plugs on it, so I don't think it's broken.

    The computer is an Acer Aspire 5830TG.  Replaced hard drive is a toshiba MK6459GSXP (works on Windows 7) and the replacement is a WD7500BPVX - 22JC3T0

    I want to apologize if my English contains errors, it is not my mother tongue :)

    Please let me know if you need more information and I thank you for your help!

    Hello

    You cannot move a hard drive with Windows 8 on it from a computer and put it in another machine that were previously running Windows 7 and expect it to work.

    It will not.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@

    And even if it would work physically, legally you cannot transfer the license of Windows 8 of the MSI laptop Acer laptop to your situation:

    Read this information:

    If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

    OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

    The above applies also to OEM system builders licenses.

    License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

    And retail licenses also can be installed on a machine at one time.

    ___________________________________________________

    And please read this, you can:

    http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

    See you soon.

Maybe you are looking for

  • Why bookmarks open in a side window?

    When I click one of my favorites, it opens in a wide window of three inches on the left side of the screen instead of in a normal web page. The only way to avoid this is to type the url in the top of the screen, which pretty much defeats the purpose

  • The older module does not appear in all: debugging #addons

    I Developer Edition installed (v51) and some add-on for Firefox, with maxVersion 41.0 value I activated the installation of the add-on unsigned and was able to install and use. However, it does not appear on everything: debugging #addons and at the b

  • Configure the firewall to allow VPN connections to a remote site

    Hi all I do a lot of how to configure VPN servers, so please bear with me if I explain a bit wrong! If all goes well a quick question, I am trying to connect a VPN client that is located behind a firewall at a remote PIX server using RADIUS authentic

  • Hilfe fur einen Neuling

    Hallo!ICH möchte like wie im Bild displaying solch ein video machen. Leider habe ich so noch davon und euch einfach question. Video Das muss oben und oben ein weisses Feld haben, dem sich die writing is. Wie kann ich das machen? Danke fur eure Zeit!

  • Why have I not an email saying my 30 day trial is over?

    I paid for lightroom 6, activated with a serial number. After installing the updated October lightroom broke, had to force quit to close and images that I imported were black, so I reinstall lightroom. Wait for another update to correct version 6.Now