Recovery of the value as active and affected partition D: drive him now cannot start in os

Don't know what I thought, was trying to find the recovery program to create dvd, so I put the recovery partition as active and assigned it D: drive now the system will not boot in OS, he goes instead to recovery mode.  Windows 7 64 Professional on elitebook 2740.

It turned out that the boot partition indicator has been moved to the recovery partition.  I used a program to partition to move indicator to the c: partition boot.

Tags: Notebooks

Similar Questions

  • I bought last month, a computer model laptop sony vaio SVE151D11M. I did a recovery of the value. How to get

    Dear...

    I bouight last month a Sony vaio laptop. Model SVE151D11M

    I did a recovery of the value.

    Now, the computer no longer starts and demand for recovery disks.

    But I do not have such a set.

    How can I get a recovery set, so I start from my laptop again.

    Please help me and thanks in advance,

    Kind regards

    Down Jonker

    Hello, I need a cover for my Sony Vaoi SVE151D11M model

    Thank you

    Kind regards

    Down Jonker

  • Look for the logic find the value of m and c of this equation y = mx + c.

    Hello

    I have 4 points for example = 3.38276, 0.375866 xi

    Yi = 3.37749, 0.281924

    using this tip, I want to find the value of m and c.

    You please suggest me some logic to solve this equation using labview programming.

    I tried with one solution, but in this case I do not have the correct answer. Here as an attachment, there is vi help I tried to solve my equation, but in this case the value that never got as a response it is dissatisfied with the equation, means if I replace the value of m and c eqation then it must be L.H.S = R.H.S, but I don't have the right solution.

    You please guide me.

    Thank you very much.

    Why do you think that the results are incorrect? I put your numbers in your code and the result on a XY Chart Wescott, I then bunk which with more than 20 values with a value ranging from 0.6 to 3.2 x and use factors calculated in your code to generate values of Y. The two overlap almost exactly...

    Mike...

    BTW: There is a linear adjustment integrated into LV VI

  • Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

    I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

    Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

    Hello

    I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    For reference:

    Set up a computer-to-computer (ad hoc) network

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

    Note: The notes section through the link above.

  • Simply select the values between min and max of a value accumulated during the day

    Hello Forum,

    a value is accumulated more a day and over a period of time. The next day, the value is reset and starts to build up again:
    with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
                   select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
                   select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
                   select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
                   select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
                   select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
                   select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
                   select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 14 val from dual union all
                   select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 34 val from dual union all
                   select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 58 val from dual union all
                   select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 70 val from dual union all
                   select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
select   ts, val
from     sampledata
order by ts asc;
    How should I change the select statement to ignore all data sets before the first minimum and duplicates after the maximum of a day to get such a result:
    TS     VAL
09.09.12 06:12     23
09.09.12 07:12     29
09.09.12 08:12     30
09.09.12 09:12     45
09.09.12 10:12     60
09.09.12 11:12     75
09.09.12 12:21     95
09.09.12 13:21     120
09.09.12 14:21     142
10.09.12 06:12     14
10.09.12 07:12     34
10.09.12 08:12     58
10.09.12 09:12     70
10.09.12 10:12     120
10.09.12 11:12     142
10.09.12 12:21     153
    Thank you

    Hello

    msinn wrote:
    Hello Forum,

    a value is accumulated more a day and over a period of time. The next day, the value is reset and starts to build up again:

    Thanks for posting the sample data and results. Be sure to explain how you get these results from these data. For example "for each day, I just want to show the lines after the daily low was reached. For example, on September 9, the lowest val was 23, which occurred at 6:12, so I don't want to show all lines earier to 06:12 September 9. In addition, when a val is the same as or more than the previous same day val (in order by ts), then I don't want to display the line later. For example, on 9 September, there are several consecutive lines, starting at 14:21 which all have the same val, 142. I want to only display the ealiest of this group, the line of 14:21. »

    Here's a way to do it, using analytical functions:

    WITH   got_analytics     AS
(
     SELECT  ts, val
     ,     MIN  (val) OVER ( PARTITION BY  TRUNC (ts)
                              ORDER BY       ts  DESC
                    )      AS min_val_after
     ,     CASE
              WHEN  val = MIN (val) OVER (PARTITION BY  TRUNC (ts))
              THEN  -1    -- Impossibly low val.  See note below
              ELSE  LAG  (val) OVER ( PARTITION BY  TRUNC (ts)
                                          ORDER BY         ts
                           )
          END      AS prev_val
     FROM    sampledata
)
SELECT       ts
,       val
FROM       got_analytics
WHERE       val     <= min_val_after
AND       val     >  prev_val
ORDER BY  ts
;

    This requires that val > = 0. If you don't know a lower bound for val, and then the same basic approach still works, but it's a bit messier.

  • Definition of the values of height and width of a clip with XML file!

    How can I specify values of height and width of a clip using the external XML file? The user needs change the values of a specific clip [rectangular] using the xml file.

    How can I do?

    Thank you.

    You have difficulties with what part of the assistance from an xml file to store and retrieve data?  Do you know how to write the values of height and width, in the form of data in an xml file?  It could be something as simple as the following...

    200

    200

  • Delete the Linux partition and now cannot start PC

    Hiya,

    I had partitioned my HD to a disk of windows xp and linux by car. I deleted the Linnux partition using the application for the removal of a partition in windows. I cannot start my computer now. When I turn on my PC, I get the screen toshiba with all the small icons and then what follows:

    Intel Boot Agent GE v1.2.45
    Copyright (C) 1997-2007. Intel Corporation

    PXE - E61 Media test failure. check the cable
    PXE - M0F: exit Intel Boot agent.
    error: no such partition.
    grub rescue >

    I do not have my recovery as I am overseas at the moment. What can I do? I use a friends pc to write this. The sick PC is a laptop.

    I'm not very computer chip - so if you are kind enough to answer for me, please speak slowly and use easy words ;-)

    Van
    Shaari

    Hello

    You can download the Setup from the Microsoft page of WIindows disk:
    http://support.Microsoft.com/kb/310994/

    Then you could install the Microsoft recovery console that helps you use the commands * Fixmbr and Fixboot * to fix the Boot Manager:
    http://support.Microsoft.com/kb/307654/

    I think this should help other rational use the Live like BartPe or WinPE disc to boot up the laptop.

  • Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

    Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

    Hello

    See if that helps you.

    Do a Safe Mode system restore to before the problem started.

    http://bertk.MVPs.org/html/restoresysv.html

    How to access Safe Mode

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And here's how to use Recovery of Acer.

    http://Acer.custhelp.com/app/answers/detail/A_ID/2631

    To start the system recovery:

    1. Restart the computer.
    2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
    3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
    4. After that the Acer eRecovery Management application is loaded, select your type of restore.
    5. Read the review and then click Next when you are ready.
    6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
    7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

    See you soon.

  • I try to go to the website of tomtom and I get an error message DNS-cannot find server.

    I try to go to the website of tomtom and I get an error message DNS-cannot find server.  I tried the computer desktop and laptop and do not know what the problem is. I thought it was the Web site, but I could put my internet work top. Help, please.

    How your internet connection are connected, if you use Proxy, then try to uncheck bypass for local addresses...

    If you use a direct connection without proxy, even try to open in another browser, firefox IE, if its opening try to update the browser to your desktop computer.

    Thank you & best regards

    Alex k

  • Follow-up of the steps to install the hp wireless printer and it worked only once. Now he says it is "offline."

    Original title: the computer geek

    Follow-up of the steps to install the hp wireless printer and it worked only once. Now he says it is "offline." Convenience store said that it cannot solve the problem. That's happened?

    Hello

    1. What is the brand and model of the printer?
    2. don't you make changes on the computer recently before this problem?
    3. What is the full and exact error message?

    Step 1: The procedure below can help you to fix this problem.

    a. Click Start > Control Panel > printer and faxes
    b. now right-click on computer and select the printer to use online

    Step 2: Update printer drivers.

    To install new or updated printer drivers to update
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

  • Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

    Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

    Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

  • I ordered the creative cloud Sunday and received a number control but still cannot open any programs. When I check the status of my order online, he says that he can't find it. Is this normal after 3 days?

    I ordered the creative cloud Sunday and received a number control but still cannot open any programs. When I check the status of my order online, he says that he can't find it. Is this normal after 3 days? I tried to ask in a chat instead of the forum window, but no one answered and after 10 minutes, my screen restarted and closed window cat. It seems a bit frustrating not knowing what happened to my order and not being able to communicate with anyone. This habit with Adobe or are they just of technical problems this week?

    Your subscription to cloud appears on your account page?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

    -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

  • SUMIF line is equal to the value of test and the line below is '-'

    Hello

    I have a spreadsheet numbers where a column has a list of names that are mixed with rehearsals and another column that has a value of profits to this name list.

    Now, I want to determine the total profits from each of the names so I can see the total profit by name.

    That part is easy, I just a SUMIF function that checks if the name corresponds to a specific name, and then adds the benefit altogether.

    The problem I have is that in the names column, sometimes I'll have a name and then the next rows are just '-' indicating that they are of the same name. The SUMIF function that I use does not takes into account these values because they obviously do not match the name of the interest.

    So my question is: is it possible to create a function that will check for a matching name and then if the next line '-', then add this value to the total as well. It has to work with several rows of '-' after the name.

    The screenshot below is an example of what I mean because I realize that it does not have much sense.

    So in this case, the total of Jess profit would be = 5 + 35 + 15 + 5 + 15 = 75

    and the benefit of Gill = 30 + 30 + 20 + 40 = 120

    I hope I did it is clear enough. Thank you in advance!

    Oscar

    Hi Oscar,.

    Although it is possible to do, it will be a little clumsy, involving additional columns. It would be much easier to stop using the "-" and use the actual names instead. Order the popup format to create a list that makes it easy to list the names.

    Quinn

  • With regard to the values in controls and indicators

    I entered a value in a control of channel 1. According to our requirements, this value is fixed. I entered the value and I closed the application and I opened the app, the next day. But there is no value I entered the control of the chain. The value must be perceived by the user. How can I do this in LabView? Thanks in advance best regards Christophe

    After you enter the value you want, right-click on the control and select "... current value default data operation. Save the VI.

Maybe you are looking for

  • Why has she changed my home page of bookmarks with the last update, I used to have 12 bookmarks and now its only list 9. WHY?

    Seriously. Its boring the crap out of me, in fact its kind to really drive me crazy, I didn't update my firefox, he just did automatically and now my book mark page (like when I'm going to open a new tab) holds that 9 bookmarks (or at least that's al

  • FF 13 on Win7 - history does not show

    No list of history for FF13/Win7... all the settings under options are to enable history. But the story totally empty. Bookmarks are fine.

  • Volume button light

    The light volume on my HP pavilion is not turn on when I turn off the sound on my computer. I've had the computer for less than a year. I was wondering what can be done to fix this?

  • Cannot open the calendar

    I used the calendar in the works for several months; recently, when I try to open, I read, 'works cannot find the files needed to open the calendar.  The files may have been lost or changed.  Try to uninstall and reinstall the program' or words to th

  • How to clear the administrative events in 'eventvwr' in Windows 7

    Is anyone out there who can help me with this problem?   I'll tell you. (1) first run the command eventvwr... (2) this will open the Event Viewer log... (3) then click on "Custom views" and make a double click on it... (4) then you will see "Events A