RECOVERY OF WINDOWS 7

Hello

Product: Laptop HP G62 465DX PC

Problem:

-J' made the mistake created an ore more bulkhead and due to laptop is not able to start so that recover the windows 7

-I did not create a recovery disk

can you help me on what could be the solution to this situation?

Hello

There are two options available.

1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

Order HP recovery disks.

2 another option that you might consider is to create your own Windows 7 installation disc.

Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

An example of a COA label can be seen here.

You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

Windows 7 Home Premium 64 bit SP1.

Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

You may need, additional drivers and software are here.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Model number:-n010TX: recovery of windows media 8

    Mr President.

    I had my HP laptop pavilion in November 2013. It came with 8 pre-installed windows. I upgraded Windows 8.1 by March, 2014 and it worked fine for a few weeks, after which, the laptop has detected a hardware failure. I had a HP technician install a pirated windows 8 on my pc and it also gave me a series of DVDs of recovery for windows 8 to be used on a HP or compaq PC.

    It is a set of 3 DVDs 'system recovery' and 1 DVD "valorization of the pilot. The problem starts when I insert the first DVD of system recovery. He didn't autolay not. I checked with control panel and made sure that the "Use AutoPlay for all media and devices" option is checked. But autopsies shows two options: -.

    1 open the folder to view the files, and

    2. don't do anything.

    Now, on the DVD it says: "insert the disk and follow the instructions on the screen. But there is no on-screen instructions.

    I opened the folder and it contains a lot of files with names that I don't understand. Please let me know how I can get the DVD to play automatically.

    Thank you

    Hello

    If I understand correctly, you want to restore the recovery DVDs with you, if so, please go through the link for recovery from recovery disks (Windows 8) below.

    http://support.HP.com/us-en/document/c03489643

    I am an employee of HP, the views expressed here are my personal opinions, not HP.
    Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
    Click the "Thumbs up" button to the left side of my post to say thank you! ***

  • The new use of recovery of Windows XP with my q Satellite Pro P300-19?

    I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »

    My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?

    Any help would be welcome.

    The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.

    Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
    So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
    Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
    You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).

    When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.

    If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
    So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
    Follow the instructions on the screen and the laptop will also reinstall.
    But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.

    So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
    Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
    This is the content of the Windows XP Recovery disk.

  • HP Recovery Partition Windows 7

    Hello

    I have Hp Dv6 2177ca. It is installed with Windows 7, and recently he has been infected with a nonremoveable virus so I had to format the entire hard drive, including the recovery partition drive.

    I have the recovery disk HP where I installed my Windows7, but now there is NO "recovery Partition" (those who use F11).

    Please tell me how I can create this recovery partition?

    I tried to create it by using the recovery in Windows 7 Manager, as follows:

    Term, I typed 'recovery manager' and open the Recovery Manager.

    There is option 'System recovery' where he asked me if I wanted to create a "recovery Partition" and asked that I have inserted "Recovery Disk #1".» When I proceed on this issue, restart the computer and windows is loaded but no recovery partition is created.

    Please help me create a recovery partition.

    Thank you in advance.

    Hmmm... I seemed to work what to do:

    Previously on installation of recovery, I me performing the "System Recovery".

    But then I did the "Factory Reset" and it solved the problem and created the recovery Partition.

  • 110-210 4c1508139t serial: recovery my windows 8.1

    110-210 product name

    Serial number (deleted content)

    ABA f3d15aa product number

    I try to recovery my windows 8.1 is posible I have not liked this windows 10 no funtion

    Internet Explorer

    flash drive

    and cong61ateun page

    I need my windows 8.1

    Hello

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Mini 110 Notebook and have to revert to Windows 8.1. Round trip is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10. Here is a link to show you how to proceed. Under the heading back to previous versions of Windows.

    I hope this helps.

    Thank you.

  • After the removal of recovery of Windows Trojan, now unable to see the files on the Start Menu

    After hitting him with the recovery of windows Trojan (which I think I deleted) using Malwarebytes' Anti-Malware and advance care system. Then I tried the unhide files which some became visible. Now although when I go to the start menu and click on a folder that they are empty, but if I go into my computer the files are there in the files. any help from anyone who has had the same problem would very be appriceated

    Thank you

    Stuart Austin

    Hi StuartAustin,

    Method 1
    Troy was not completely removed from your computer, I suggest you to scan virus online at the following link

    http://www.Microsoft.com/security/scanner/

    Method 2
    I suggest to create a new user account and see if that helps, the following link you will help to create the new user account.

    Create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
    http://support.Microsoft.com/kb/279783

    If everything works well in the new user account, I suggest you try the steps from the following link to transfer files and settings to the new user account.

    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
    http://support.Microsoft.com/kb/811151

  • I want to download recovery cd windows Vista for Compaq CQ60-110EE

    I want to download recovery cd windows Vista for Compaq CQ60-110EE

    and I want to upgrade processor but idon't know this laptop supports processor? /

    [Personal information]

    Downloads are not available, recovery discs need to be ordered at HP, then they post them to you.

    Thanks for posting your complete product number, and I'll see which processors are supported on this model.

    http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us&DLC=en&LC=en

    #2

    Please do not post your s/n

  • Bootmgr missing and I have tried using the recovery installation window and it fails. no operating system are loaded.

    Double post merged and deleted.  Post moved from XP to Vista forum forum>

    Laptop HP discharged linux os, linux is the only operating system on laptop... Loading Vista missing bootmgr, the recovery option window has not repaired the file. I have no operating system in SYSTEM RECOVERY WINDOW. I chose load drivers and I am looking at the OPEN window and the SOURCE and do not know what to do next or what file to select sources. I would appreciate your help. Thank you

    Hello

    Here's how to reinstall Vista as you no longer have a recovery partition.

    This can help you (download files and make your own DVDs):

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

    And here are instructions on how to burn ISO disk images:

    http://www.SnapFiles.com/get/isorecorder.html

    The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

    "How to download a Vista ISO and create a Setup DVD or USB"

    http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    ___________________________________

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do it for a small fee

    HP:

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07143#N76

    ___________________________________

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

    I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

    Hello

    Here are the different ways to reinstall vista

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    Save all data, because it will be lost, do the above

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Windows error recovery. Windows could not start... _

    My Dell laptop I have from 10th July indicates the following:

    Windows error recovery

    Windows could not start.  A recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

    Start the reboot system (recommended)

    Start Windows normally

    The two options to return to the same screen.

    I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

    I would be very grateful if you could help!

    Thank you

    Mark

    Hello mtb123,

    1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

    2. you remember what changes you made to the computer before you start this error?

    I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

    You can see the previous post of Srinivas R to verify the information on the system restore.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

    I have two Acer Aspire laptops.  They are totally frozen because of the virus.
    I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
    I have to rebuild my laptop.

    Hello

    No - what are the two Acers come with a recovery disk?

    If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

    With an Acer, you press Alt + F10 at startup to start the recovery process.

    All data are lost when you do the above.

    And for the lost disc, contact Acer and ask them to send you recovery disks.

    They do that for a small fee:

    http://us-store.Acer.com/RCD/

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • I ended the trial of recovery vista window and the credit card was not credited back

    I ended the trial of window vista recovery program has been removed from the computer and my credit below was not credited back

    Hello

    Windows vista recovery is Malware

    Contact your credit card company

    Read about it

    Windows Vista Recovery is a program of analysis and optimization of fake computer that displays false information in order to scare you into believing that there is a problem with your computer. Recovery of Windows Vista is installed via Trojan horses that display fake error messages and warnings of security on the infected computer. These messages will state that there is something wrong with the hard drive of your computer, and then suggests that you download and install a program that can solve the problem. When you click on these alerts, recovery of Windows Vista will be automatically downloaded and installed on your computer.

    As this program is a scam do not be scared by buying the program when you see its alerts.

    read removal steps below to make sure that it is totally deleted

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-Vista-recovery

  • Recovery of Windows Vista Premium with no installation CD

    I had to reinstall completely portable my son after a number of virus caused his laptop Toshiba to failure, but the question I have is the fact that I don't have a installation CD any recovery or windows.

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I didt create a disk recovery for windows 7 Home premium, and I lost the original and the recovery partition

    I didt create a disk recovery for windows 7 Home premium and I lost the original and the recovery partition, but I have still the product key and the same laptop that was originally installed with windows 7 copy and now im turning my laptop with a fake copy, how to restore the original copy of windows 7?

    Hello

    You have certainly reduced your options

    The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

    http://www.Microsoft.com/en-us/software-recovery

    But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

    As you have licensed preinstalled OEM (Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee, if they still have them available.

    Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

    See you soon.

  • Recovery of Windows 8 stopped at "select the driver to install '?

    Ugh! After a week of not start & on phone or online in several forums and playing with the page of the BIOS, the drive just place & began to start! Yay!

    Now, during the "collecting information" part 1, after being in the language, I will wonder "select the driver to install."

    I have a cd player & a Boot (X :) of the options. When I click either, I have "no device drivers were found."

    Any suggestions here?  I don't want to start in fear of not start again. I get records under both options, but nothing seems to work.

    I was more than a week to this & don't have the $$ to pay someone to fix it. ANY help would be most appreciated.

    Windows 8.  Samsung laptop.  Windows 8 recovery disk.

    Original title: Ugh!  Recovery of Windows 8 stopped at "select the driver to install '?

    Hello Jon,

    You can try to contact Samsung to help you complete the recovery process and see if that helps because none of the troubleshooting options work with recovery disk.

    In addition, refer to the article below to learn more about the error message:

    "A required CD/DVD drive device driver is missing" or "needs a driver your computer media is missing" is displayed when you install Windows

    http://support.Microsoft.com/kb/2755139

    Please do not hesitate to write us again for assistance and we will be happy to help you come.

    Thank you

  • recovery of Windows 8 (if disk crash)

    Hello

    I bought windows 8 online, update of windows 7.
    I had a bunch of files in a new directory named ESD and instructions to install win8.

    I wonder what I could do to recover the whole, if the drive of my PC crashed.
    In the past (I mean windows 7), I got a CD with the system recovery.

    What of this "installation of windows 8 online?

    Thank you very much

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.

    From your problem description, I understand that you need create a recovery for Windows 8 computer disk.

    I suggest you follow the troubleshooting steps to check if this may help.

    Method 1:

    You can use the external hard drive and the history of the files as a recovery disk:

    Historical files automatically backup files that are in your libraries, favorite contacts, Microsoft SkyDrive and your desktop. If the originals are lost, damaged or deleted, you can restore all the.

    A location disk or external network to help protect your files against an accident or any other PC problem

    Check out these links:

    How to use the file history

    http://Windows.Microsoft.com/is-is/Windows-8/how-use-file-history

     

    Set up a drive to history file

    http://Windows.Microsoft.com/is-is/Windows-8/set-drive-file-history


    Method 2:

    create a bootable DVD of windows 8

    You can follow the below mentioned article to create a DVD bootable to Windows 8.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Note: Article also applies to Windows 8.

    Just reply with the results. I'd be happy to help you further.

Maybe you are looking for

  • I dropped my laptop and now the screen is yellow tint

    Hello Recently, I dropped my laptop and turned it on to find that the screen is tinged with yellow.Toshiba will be able to replace my screen?

  • What are the data for the PXI-6552-invalid range

    Hello Let say, I put the voltage custom for the PXI-6552 module 2.4V - high level 0.6V - low level Then, on canal0, I provide a signal of sample 3V 0 1 3V 2 VOL. 2 3-0V Thus, the sample 0.1 is high. Example 3 is Low.How sample 2? Please notify. Thank

  • Remove my drive hard slave - a second version of Windows XP

    Hello. I bought a blank main hard drive for my PC, with the intention to install XP on it. During the installation process, I ended up trying to install Windows XP on my secondary drive - he was not let me install XP on my new drive. However, the ins

  • WRTU54G-TM internet light blinks constantly

    I just got this modem used on eBay to set up a wireless system at my parents home.  Whenever I plug the ethernet cable from the modem cable (Brighthouse) directly to the router, he moaned not being able to find an internet connection.  I restored to

  • I inserted my office 2007 disk into my cd drive and nothing happens

    I have restored my computer to factory settings and want to reinstall the Office home and Student 2007 I bought with it. I inserted disc makes it sounds right... but nothing happens after that... no permissions for windows appear... no verifiacation