Recovery on HP mini 110/3530NR

Similar Questions

• Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7,

  Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7

  Dear Brigitte,
  Yesterday, I tried to connect my keyboard to my mini HP numbers, but it did not work.  I am sure that the problem is the driver, as I was able to connect to my HP laptop with Vista, without any problem.

  The keyboard is a keyboard of ten Note X TK01 USBM.  In the back are the words "Arvel TK01 = USBM Ten keyboard, S? N 990500424, made in China.

  You can locate a driver for me so I can install it on my HP Mini?
   
  Thank you

  Dear Brigitte, it was one of those anomalies that solve themselves.  After trying several times, I found the pad of numbers worked so I replugged it it after that I received the error message.  Second time around, it works fine.  JC

• HP Mini 110-3530NR extremely poor performance on the Internet

  My HP Mini 110-3530NR Netbook has very poor performance on the Internet.  I use Windows 7 Starter.

  Say hello to new coppens1.  I apologize for the delay in my responses.  I have not received the normal e-mail notifications.

  When I had to go to msconfig earlier in our interactions you make sure that the Synaptics driver load with Windows?  Follow these steps to check.

  1. Click Start, type "msconfig" and press ENTER.
  2. Go to the Services tab and search for "HP Software Framework".  This should load with Windows for a lot of the HP software to work properly.
  3. Then go to the Startup tab and make sure that anything it either by "Synaptic" is loaded with Windows.
  4. Save your changes and exit msconfig.
  5. Then go to your touchpad settings and, even once, make sure that the settings are correct.
  6. Finally, restart the machine and make sure it works properly.

  I totally understand if you want to open a new thread as this covered a few topics!  Just make sure to send me a private message with the link so that I can make sure to help you here.

  I wish you a beautiful day JC!

• You place your order for recovery disc for mini 110

  Hello world

  first of all, I say this isn't really a laptop, I have a mini 110-3610sa.

  I've upgraded to windows 7 Professional to windows 7 basic, whatever he was going well until I stopped

  I lost the HP quick web and also the restoration of the factory, it goes to the windows recovery.

  can help you, I would really like to have fast web back it was very good and I was getting just configured with e-mails and fav sites.

  any help

  Ron tinydamed

  You can order recovery disks by following the instructions in the link below

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

• Creating a disk recovery for HP Mini 110-3601tu

  I read that a 8 GB USB flash drive is needed for this.  My question is:

  Can I use my external hard drive of 250 GB with 150 used and unused space 100 GB?

  Thank you.

  N ° the external hard drive is not bootable, which is necessary to recover if necessary. A flash drive is bootable by the creation of recovery software.

• recovery bios Compaq mini 110 c

  My compaq mini has a bios error problem.

  When turn on, he will not opt for a 'change boot device order' or 'bios Setup options', it jumps to
  ENTER THE CURRENT PASSWORD:

  The error message is >

  password check faild

  fatal error... System stopped.

  CNU937DPP5

  Please help *.

  try to enter e9lofxt22q

• ATTN: Zaq attack disable touchpad when mouse is used. HP Netbook Mini 110-3530NR, Windows 7

  How to automatically disable touchpad when the mouse is used

  Say hello to new coppens1.

  I'm glad to hear that you were able to find a solution to this problem!  Also, thank you very much for the update.  I will make sure you and remember for future use.

  Have an amazing week!

• HP mini 110-3530nr windows 7 32 bit

  Cannot open 'youtube' in outlook 2010. Get the error message "the operation has been cancelled due to restrictions on this computer"

  Hello

  Please use it difficulty from the following link:

  http://support.Microsoft.com/kb/310049

  Good luck.

• Error 1317 on mini 110-3530 can\ ' t create the office installation folder. No way.

  Windows of HP mini 110-3530nr 7

  layout Error 1317 when installing Office 2010. Apparently the path does not exist.

  Thank you

  Bill

  Hello

  This is due to access rights. Please check the answer from following link:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/error-1317setup-cannot-create-the-folder-during/9063e10c-22E1-4e7c-AB14-6e45a2b514e6

  Kind regards.

• Office 2010 is corrupted on my computer hp mini 110-3530. I cannot uninstall or repair using this feature.

  HP mini 110-3530NR Windows 7 32 bit

  If you have office installation disc or package installer, you can try a repair by running the disc or the installation package.

• Recovery disc for Compaq Mini 110 c-1100DX

  Hello

  I contacted HP support several times over the past 2 years without success (a few times when I first bought this PC), so I thought I would try these forums.  I bought a Compaq Mini 110 c-1100DX with Windows XP a few years ago and wanted to create a recovery disc for it.  I followed the instructions, but I find that the typical HP, who is referenced in my manual, Recovery Manager does not exist.  HP support has confirmed this, but refuses to communicate any recovery disks support or operating system.  They said I could use the Roxio software that never worked to create or restore images.  I refuse to pay $16 for something my other HP computers 5 all allowed me to... create the factory recovery disks.  I have an external DVD burner, I have USB flash drives, and I have a desire to find a way to recover the original image.  I know that I can make an image of the disk because it is today, and I can use another software to create back ups.  I don't want to do that, I want the original image.

  Does anyone know of a place to download this image, a line of support that might be willing to send me the DVD recovery, or a way to connect with a more high level and preferably American, support staff?  I have 5 HP computers and printers HP 2, and I know the tech support/customer service line is a waste of time.  I'm good enough at the end of my rope with HP, and despite the fact that computers and printers have always been good support so so incredibly awful that I can't buy them more if I can't get this simple application is complete after 2 years of trying.  Any ready HP there at Carillon?

  For reference for anyone else having this problem (or any other issue, with the support of HP), I called 650-857-1501 (HP corporate), went to the business operator, explained my problem and the issues I had with the support of the founded India, she was very polite and transferred me to a very useful case manager named Emily and it solved the problem in 5 minutes.  I can't believe how much it was easy after suffering through hours and hours of race around the line of standard support.

• RECOVERY FAILED on HP MINI 110 (pn VK952EA #ABU)

  Hello

  My HP Mini 110 (Windows 7 starter edition) was running slowly, so I decided to use the valuation facility to return to factory settings.  Everything seemed to go well; I am as much as the screen "Setup is preparing your computer for first use", and then the Windows Welcome screen. But then the message "Windows cannot complete the installation. To install Windows on this computer, restart the installation"appears. If I click OK it disconnects and begins again, with the same result. So I crashed and tried to use F11 to start the recovery process, but nothing happens (by default in the attempt to load Windows, with the same error message).

  It was the first time I tried the recovery on this machine (although I did the same thing with success on other devices), and the edition of Windows 7 Starter has been as when buying.  There was a large number of Windows updates this morning before starting the recovery process (I was a little surprised at how long they took), but nothing else of note.

  Thanks a lot for any advice.

  Hi, Julia:

  I know it works because I have done it myself and made a bootable USB flash drive with the file.

  I think I can lead you down the wrong path...

  If the file is compiled correctly, you should get an option to install several variants of windows 7 and you select the one you want.

  I'm looking on the instructions, and what I did was to delete the IE configuration file in the sources folder and closed the file.

  I do not edit the file and then I used imageburn to create the ISO file.

  Follow these instructions...

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3827.2-1-4-deleting-the-EI-cfg-file-to-obtain-all-versions.aspx

  Paul

• HP mini 110 cannot use recovery discs - BIOS insists the hard drive test failed. Drive works on another computer.

  My niece has a HP mini 110 that does not have a day. Do a check of the hard drive in the bios, it failed (7 on playback). I though I should get a new one so I ordered another. While waiting for that to happen, I had access to a usb SATA bridge and the opperating system was beyond repair and the unreadable disk from HP mini, I decided to try to repair the disk. So I reformatted the old disk using my desktop computer. Windows had no problem with the drive and it seems to work very well.

  I also had to order the recovery disks (intro to windows 7).

  In any case try to reinstall using the recovery via the DVD USB drive disks. It kept coming back with error 17 - I found a hard drive error. I also tried to install with a Windows XP installation disc and it was more explicit hard drive it said it had NOT installed it - or "it does not match the sheet material for unity" (or words to that effect)

  To get the new hard drive - the same problem. Even if both of these drives operate as USB connected to my main desktop drives. SO my conclusion is that the BIOS start inspect the hard drive, check the configuration of the formatting. that is the size and the partitions etc. and when they do not correspond to the idea of BIOS of good care he rejects the hard drive and finds it is not installed.  Or maybe to do some files on the hard drive of base. Whatever it is, the bios concludes that there is no hard drive and will always return a "failed" to the hard drive of the bios test.

  Any ideas on that? I need to know exactly which partitions are expected by the bios. Does anyone have these specs, or maybe you have a mini HP and can examine your hard disk and tell me the amounts of partition and the size?

  Unless I can get the bios to recognize the hard drive, I don't see how I can reinstall the operating system on it. Any help is appreciated.

  Thank you

  _______________________
  When it comes to fix computers the longest word in the English language is "JUST"... as in "you do just that and it will work" :-)
  _______________________

  HI David

  Well, I hope this is my last post here. I had already printed a return address for the recovery disks, being returned to the Netherlands. Just for the beggar of cast iron, however, I decided to try just once more would like to think that now that there is a kind of operating system on the hard drive it might work. But unfortunately still; no joy.

  All this time I would be considered may not be something wrong with the external hard drive because it was no problem to start the installation of XP. So I was just wondering maybe it does not receive enough power (it is a slimline portable DVD player that gets its power from a second usb) so I made a DVD player external adhock using an IDE hard drive enclosure (which has its own power supply and an old internal DVD burner I had put aside.

  To my surprise and joy; the HP mini started the recovery process. I am now watching reformat the windows partition and copy the files needed to restore the hard disk.

  So anyone with a similar problem to the HP mini not recognize the recovery disks is my advice; try an another external DVD drive, preferably one with its own supply of.

  Thanks for all your help and patience David.

• Recovery Manager uninstalled on HP Mini 110-3131dx

  I accidentally uninstalled the Recovery Manager HP on my HP Mini 110-3131dx from my netbook has been slow.

  Now I'm trying to reset to factory settings and I'm not able to determine how to reinstall the Recovery Manager.

  When I start in using F11 Recovery Manager, all of the options except windows is disabled restore and restore windows has only recent restore points which are useless.

  Can someone indicate to me to the right link to download the Recovery Manager. I couldn't find installable upgrade

  Here are the specs you computer Netbook HP Mini 110-3131dx. According to the specification, this model left the factory with Windows 7 Starter 32 bit installed. HP provides no downloads of the HP Recovery Manager, HP Recovery partiton or HP recovery media. At this point, you have several options available to you;

  Backup all your personal data before all the instructions below.

  (1) Please mark the 'Active' HP Recovery partition by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console. After your computer restarts, you should be presented with the option to return the computer to a factory condition.

  (2) Please use the support of HP recovery, you created earlier to return the computer to a factory State.

  (3) If you create this media, please see Windows 7 32 b recovery USB-Kit or contact assistance from official HP through the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  (4), if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can also install Windows 7 Starter by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. This method will not install HP customizations or value-added software and you will have to manually install all drivers of the PC HP Mini 110-3131dx drivers page.

  Windows 7 SP1 can be found HERE and HERE. (Download the Windows 7 ISO)

  Link to "ei.cfg removal utility" . (Download and use to allow you to install Windows 7 Starter)

  Direct link to Windows 7 USB/DVD Download tool. (Use to create ISO support)

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Mini 110-3730NR, recovery partition deleted

  November 10, 2011

  I bought a HP Mini 110-3730NR laptop a few months back and I started to tinker a bit with it. I downloaded this software called CCleaner and I didn't know what disk wipe was (Yes, stupid me) well anyway, I accidentally erased my recovery partitions and all other files in the drive with it. It's a Windows 7 laptop with no. place to imput a CD. Is it possible to reverse what I've done without having to pay the $ 40.00 dollars more to get a backup thumbdrive? And could I may return it to the store because my warrany expires in September 2012? Please, it is perhaps one of the worst days of my life in more ways than one. Please, have some good news for me.

  Sincerely,
  Trisatan

  Hi, Trisatan:

  I'm sorry to say you are out of luck, and there is nothing you can do.

  If the store will resume, lucky you.

  If not, you can buy a set of recovery disks (if HP even them - I don't see that they do) and a DVD USB external drive to install with.

  Otherwise, you will need to purchase a full OEM or retail version of Windows 7.

  Paul