Recovery to back up the information.

Similar Questions

• Removes really all the information from the old operating system recovery disc?

  Hello!
  I wanted to know if the recovery disk that came with my Toshiba computer deletes * all * the hard disk information, * or is it possible, which has damaged the malicious software that was installed on my computer sometime before resists after using the recovery disk? *

  "If I use my drive recovery the program just wonder if I wipe my hard drive and informs me that my data will be destroyed if I use this recovery CD. After this issue alone, it begins with the recovery process. Is ' normal for this drive, he'll ask me any other questions on "what partition will recover and so on and it starts recover after this issue alone?

  What Toshiba drive cleanup could I use the case, if this recovery disk deletes all old information from the hard drive to ensure that * all * of my last hard drive is wiped clean?

  Thanks for the reply!

  Hello

  If you use the disk recovery Toshiba, all data will be erased on the HARD drive.

  Before the start of the resettlement, the HARD drive will be formatted. Malicious software and other software will be deleted.

  So you n t need another drive or another program to erase the HARD drive.

  Try it and you will see that it works. But first, back up your data.

• When I change the contact info, it will remain on my phone.  Always comes back to the old information. What can I do?

  When I make a change to my details, it won't stay on my phone.  It always goes back to the old information.  I have a lot of contacts and need to change the numbers.   Help, please!

  If your device behaves erratically these steps usually. They assume that all the content you want on the device in your lending library for the restoration. If not see recover your iTunes from your iPod or an iOS device first. I would also recommend you copy everything off of the camera, if you have not already.

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  TT2

• While the iCloud recovery backup... continue to go back to the screen HELLO?

  I am currently trying to reactivate an iPhone with the last backup to iCloud.

  The iPhone asked me for the first update to iOS 9.3.1 (because the previous backup on previous iPhone did in 9.3.1 I guess... (and although this new iPhone showed 9.3.1!...)

  Now I'm gone screen HOLA-HELLO, entered a network wi - fi available, connected with my operator (with the right SIM card of course - phone work - test received call).

  However, now, so that this treatment with the recovery of backup, when I let the phone go to the screensaver, it keeps going back to the screen HELLO... Is * normal *?  Or should I suspect a problem with the iPhone 5?

  (Just bought from a dealer - it is seller-renovated, reliable source)

  Thank you

  Rob

  While iCloud restoration takes time - given the dependencies on your WiFi and the amount of content to download - it should not restart loop like this

  Restore your device from an iCloud or iTunes backup - Apple Support

• When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

  Question
  When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

  See:

  • Firefox > Preferences > advanced > general: system default: 'send performance data '.

• I recently had to replace my iPhone 6.  I can't store contact information, such as names and phone numbers.  I enter all the information and click Save.  Then go back and contact is not there

  I can't store the information under telephone contacts.  I enter information and press on save, but go back and contact is not there

  Is - this with iOS 5.0.1 and 4 s?

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner

• I'm trying to update the information I inserted to the account recovery process

  The email I used for a few years had a virus and has begun to send spam e-mails to contacts. Me will not fix this issue because of laziness led me to get locked because Hotmail thought that someone had taken or stolen e-mail account. Hotmail has proposed trying to recover the account and to do this I had to use another e-mail to give them information about my email address I am recovering. the information I gave them in the account recovery process was not sufficient for them to retrieve my e-mail so I want to update the information and give more information, but I can't figure out how. I hope that I can help on this.

  Thank you

  Hello

  We can't help yo uwith hotmail problems here

  You'll have to repost in the forums specific hotmail link below

  http://windowslivehelp.com/product.aspx?ProductID=1

  Consult with Microsoft Certified Solutions
  1 How to work the views Active Hotmail?

  2. what to do if you can not connect to Windows Live Hotmail

  3. your account has been temporarily blocked

  4. account compromise - unauthorized account access

  5. reset your password

  6 error when you try to send an e-mail: your message seems to have triggered our spam filters.

  7. change your password

• I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information. True or phishing?

  I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information.  True or phishing?

  Hello

  This is a phishing scam.

  Don

• How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user?

  How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user? any example?

  Fjean wrote:
  What is the independent procedure/function?

  You can create stand-alone procedure to record messages even if the transaction is rolled back messages is stored in the table and are committed.

  Example of

  SQL> DECLARE
    2    PRAGMA AUTONOMOUS_TRANSACTION;
    3    emp_id NUMBER(6);
    4    amount NUMBER(6,2);
    5  BEGIN
    6    emp_id := 200;
    7    amount := 200;
    8    UPDATE employees SET salary = salary - amount WHERE employee_id = emp_id;
    9    COMMIT;
   10  END;
   11  /
  
  PL/SQL procedure successfully completed.
  
  ---log_error procedure
  -- Table Err_tab ( seq number , time_stamp date, message varchar2(4000))
  CREATE PROCEDURE log_error (p_message VARCHAR2)  AS
    PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
    INSERT INTO Err_Tab(seq.err_seq,SYSDATE,p_message) ;
    COMMIT;
  END log_error;
  /
  
  -- You can use this procedure to log
  -- error messages as follows in a transaction
  BEGIN
    log_error('Start emp update') ;
    UPDATE emp set
    log_error('End emp update');
  EXCEPTION WHEN OTHERS
    log_error('Update Error '||SQLERRM);
  ROLLBACK ;
  END ;
  /
  Even in case of Rollback error messages will be inserted to log table 
  

  SS

• the internal HARD drive has been corrupted and I fails to make the back upward. need information.

  I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks

  Hello:

  There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5079502 & CC = US & DLC = in & LC = on & query = LQ862PA & Tool=.

  What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).

  This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.

  That assumes you can read all 25 characters of the product key windows 7.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.

  Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.

  http://h10032.www1.HP.com/CTG/manual/c02666702.PDF

• Questions for the recovery of account with the code by email * help *.

  Hey! I've been struggling with this for a while now and I finally had the time to ask for assistance through this Web site.

  I forgot the password for my account, and at one point, I thought that everything would be fine because I thought I could get it back by asking a code by email. Well, it turns out that after entering the code, I get a message that says that this "this code did not work. Check the code and try again. »
  I have re-tried a few times and I have no other way to recover the account have not sufficient information to allow for a recovery.
  
  
  This has really been bothering me and this account is important. If someone could help me it would be much appreciated, good holiday!
  
  

  BrandonBXP

  What account are you talking about?  Hotmail, Outlook.com, office outlook win 8, etc.?

  If it's Hotmail/outlook.com as I suspect, you must post in this section, but they will tell you that the associated account issues must be treated using the secure online form

  Microsoft forum account has been deleted and all associated accounts must now wonder online  ici  

  Select the error you must help with and fill in the information requested on the next page.  You must be connected to a Microsoft account to access the form.

  If you are unable to access your main account, you can use another account (if you have one) or create a new one at https://signup.live.com

  You can read more information on blocked accounts here

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Computer startup problem. Recovery system restarts just the system.

     Computer my mother farm very well last night, but after a reboot this morning, the Dell splash screen was covered with blue vertical bars and it kept crashing when you go in Windows Vista.  In safe mode don't work such that it is simply the computer freeze to a black screen and trying to use the system supplied with the right computer recovery disk the computer back at the start of the Dell and plant one more time.

     The computer had no errors at all before this problem, so we have no idea of what the problem may be.

     Tried to reinstall Vista, it becomes black screen "finish installation" and finally goes back right to the screen of Windows recovery again.

     If the information below fail, contact Dell.

     http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

     Above is Dell to reinstall Vista from the DVD on your computer.

     See you soon.

     Mick Murphy - Microsoft partner

  8. How can I get my dell inspiron back to the setting of foctury

     Howe do my dell inspiron back to focture settings

     Hello

     Look for partition install factory hidden if you have one that it will reinstall to when new.

     Go to start click - technology - law - management - disk management.

     Your h/d would have 2 partitions 1 with letter C: with NTFS file system.

     The hidden restore partition would have no letter and a Fat32 file system with up to 6 GB of space.

     If there is, restart the computer and keep listen them to each of these keys F10 or F11.

     This should start a PC Angel or program ghost that will erase and format the hard drive, then reinstall Vista back to factory settings.

     Interviewed by the program you want to record your data say Yes.

     Navigate your computer manufacturers website.

     To make a recovery disk bootable DVD that can be used in an info your H/D fails.

     If you do not have a hidden partition, try http://www.restoredisks.com/

     Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul