Recreate a drive?

I installed a new CD/DVD player, thinking that the former was kaput. Now my computer does not recognize a drive. What do I create it?

Hi James b. Corbett en

Thanks for posting in the Microsoft community! You have reached the right forum for your question.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

Tags: Windows

Similar Questions

  • should I have reinstalled el capitan on flash part of the promenade of the merger?

    Don't ask me why, but... After reformatting MacMini I rebooted ElCapitan on the web. He asks whether to load on the hard drive or what I imagine to be the flash of his fusion drive part. I loaded it on the hard drive. Should I have chosen the flash part for best performance? Any way to move it?

    On another issue, any reason why I do not see standard folders in the finder window (such as photos, movies, etc.), or a users folder? Was it a result of reloading the system?

    Thank you!

    Joe

    I know not what year Mac Mini you have. I'll assume you have a Mac Mini 2014 you bought with a Fusion (128 GB SSD, 1 TB of HDD) drive.

    Looks like you have not re-Fusion your drive. If this is the case, you can restart in the restoration of the Internet (Command + Option + R), select disk utility, select one of the drives (SSD or HARD drive) and I hope disk utility will ask you to CHALLENGE or IGNORE the fuser unit. If you get this choice, choose FIX, so it can recreate your drive of Fusion. Then, you must reinstall OS X. Make sure have a return flow upward.

    If you want to keep readers separated, they so that you install OS X on the SSD performance. But we must be aware that the SSD is ONLY 128 GB.

    Your 2nd question, you will probably need to open Finder/preferences, then on sidebar. Check the folders you want to display in the sidebar.

  • System Restore does not not using F11 (noteboook: Pavillion DV5T).

    Hello

    I have a laptop HP Pavilion DV5T. He had 3 discs: disc C (OS installed) and D (recovery partition) and E (DVD player) drive.

    D drive had the HP recovery. Now, I created an image ghost of drive D (recovery drive) in a few DVDs and then did a clean format of the entire HARD disk. I also deleted all partitions and then recreated the drives C and D.

    After that, I restored the Ghost image to drive D.

    Now, when I go to boot options and perform a recovery of the system using F11, it says "Boot Device not found".

    Please let me know how I can run my HARD drive recovery.

    The problem is that I have no recovery discs.

    Thank you

    Pawan

    Yes... Knowledge is power!

    I solved the problem... something like this:

    1. I downloaded the tool: HP Backup and Recovery for Vista for the HP Web site.

    2. and then I installed Windows 7 on drive C.

    3 installed HP Backup and Recovery tool for Vista on Windows 7 and it ran to create recovery discs.

    4. to my surprise, it took 2 hours... but has managed to create the recovery disks.

    5. then I restored to factory settings using the recovery discs.

    Thank you

    Pawan

  • New install ESXi 4, do not recognize the data store

    Hello everyone,

    First here is the configuration hardware server, with that I currently have problems

    HP DL360 G5

    6 x 146 GB SAS (Raid 5) Local storage

    HP Smart Array p400i

    With this server, we started to have only a 4-drive raid 5 (which was working fine), but this week, we have installed more than 2. To do this, I deleted the existing logical drive and creates a new one that included two new hard drives to bring the total to 6.

    Well regardless of how many times I try when ESXi 4 completed installation there is no established data store (what she has always done automatically in the past). Please see attached screenshot named data store for more details. When I look at the devices that it displays the partitions that have been created and one of them is VMFS with a 678 GB in size (see devices.jpg for more details). If I try to create a data store, it goes through the motions but shows an error message "error during the configuration of the host: unable to update the disk partition information.

    I erased all the disks, deleted and recreated the drive bays and the logical drives all nothing made. We have another box that is identical to that where the same procedure was performed and it has worked flawlessly. I'm so full of ideas. If someone could provide information I would be very appreciate it. Thank you!

    This may sound stupid (maybe it is) but you can clear the RAID, exchange of HARD drives (bay1 <->bay6 bay2 <->Area5, bay3 <->bay4), then recreate the RAID and try again? In case there are a few old patterns on disks that are recognized during installation.

    André

  • Current patches

    Does anyone know that the latest patches for 5.4.2.228 r 2.

    Why patches are so hidden?

    I run into an error control repository mounting recovery points of loading. Image of volume with the same file, the version number 4503599717192563 already exists

    Thought I'd post here while I wait for Dell back to me?

    I worked with the support and had to recreate the drive where lived repository and recreate the repository. Everything is back running. May have been caused by Volume be divided into a large number of partitions and dynamic.

  • Vote 10gR 1 disc

    Hallo,

    is it possible to recreate a drive to vote (not saved) in gR 10, 1 without having to reinstall CRS?
    Via crsctl votedisk PATH add path and crsctl votedisk remove

    I'm sure, you can't have a new votedisk without that one being present and you cannot remove all disks of vote - he expects at least one. You must certainly have backups or mirrors to run these commands.

  • How can I move specific files according to date to a new drive and recreate the folders that they were originally in?

    I would like to take I have saved a search to sort by date and then move them to another drive and also preserve or recreate specific subfolders, in that they were originally of specific files. How do I do that? I found an and only a third party program which claims to work with the copy of the files and other. It is called "Copywhiz" but I don't think that it has this ability account required from what I've seen of him. I looked up information about the xcopy command, but his date setting allows only a specific date, not a date range. What is the best way to do it if possible? Otherwise I'll have to go through the TEDIOUS process of your time to copy all the folder and its subfolders to the other drive, looking all over again for a date range and delete these files and not in the range of dates, I want to be in the files in specific folders. I hope it is clear to you because I have no other way to explain. The specific details of the project are that I have a bunch of psd files in many subfolders based on the object. Of these files, I want those who are previous to the year 2009. I want to have the records that those displaced persons files were to be preserved in their new location. Essentially, I want to replicate the folder structure that only selected files to the new drive.

    I could get this link to work, so I downloaded from http://www.softpedia.com/progDownload/RoboCopy-Download-87790.html.

    I tried it and it worked and it was relatively simple.  He did the directory and the structure of the subdirectories as well.

    In my view, is the command you would use in command prompt:

    ROBOCOPY sourcedirectory *.psd /E MINAGE:20081231 destinatiiondirectory

    I think that's all there is to it.  It worked for me when I did something similar with all .doc files in the My Documents folder.

    WOW!  It was fairly easy and well obviously the solution.

    I hope this helps.

    Good luck.

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When I open Firefox I overload my profile. I uninstalled it and reinstalled on my external hard drive. When I open Firefox it recreated the ideas of folderAny how do I change the setting so that this folder is in my hard drive

    most of the information is in my question. My profile on my home computer is limited. I would like to set up Firefox so it puts the profile and any other information on my external hard drive. I tried all of the optional parameters, but have not been able to solve the problem

    You can use the Profile Manager to create a new profile, then click on the button choose to set the location of this profile on the other disk. You must specify a new (empty) location for this profile because Firefox uses the specified location and does not create a new folder. This allows you to specify an already existing profile on this player and Firefox it will use.

    See the location of the custom profile > Firefox Thunderbird and SeaMonkey 2

  • Recreate the D: drive on laptop recovery disk

    How to re-create the recovery disc on my laptop in the series G Win 7? the original that was created when you purchase inadvertently been misplaced.

    Hi, Mireille,.

    Under the terms of the OEM license, you can only create 1 set of recovery media - if you have misplaced the original game, you can still order a set of replacement of HP discs - the cost varies depending on where in the world you live, but they are generally inexpensive.

    Kind regards

    DP - K

  • Sierra of MacOS - iCloud Drive Documents &amp; Desktop keeps Getting Stuck download

    Hello

    as stated in the header after activating the iCloud Drive to include Documents and desktop download stuck guard.

    Since almost 2 weeks I started the task mean to ask iCloud to include above mentioned files. Total quantity was about 100 GB download. I have 1 TB of storage for iCloud. iCloud is always download and always get stuck after about 10 to 30 minutes to download. Then I have to restart after that it starts to load only from getting stuck again.

    I was on the phone with Apple Care who had no idea of what might happen. They Said and I quote "we have no problem with iCloud download and your problem has not yet been recreated by others."

    I find it very hard to believe that I can repro this problem on 3 different systems.

    I have Cable speed of 400 Mbps downstream a 25mbit upstream. I have zero upstream of questions to dropbox or Spideroak at an astonishing speed. ICloud is the slowest I've ever known in my life but as I said after 14 days, it has yet to fill about 40 GB. This is ridiculous IMO.

    If anyone has any ideas on what is once again wrong with iCloud, I would of course tips

    Thanks in advance to anyone who takes the time to post!

    Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

    Have you tried the signature to iCloud and then reconnect?

  • Container of notes in iCloud drive deleted by mistake

    After many sync problems with Notes, I decided to start from scratch. I backed up all the notes on my Mac, disconnected all iCloud drive and then removed from the Notes container in stock to manage devices. It was clearly a mistake - I realize now I should have deleted the data inside of the container. Initially, I imagined that when I went on iCloud sync on one of the devices (Mac, for example) the container should be recreated automatically. Of course, it was not. Mac and iPhone are both showing some iCloud Notes - I entered the data from different test on both devices - and sync turns ball is encouraging. But no synchronization takes place and no container in managing storage.

    I checked Time Machine to see if I could find the container but the contents of the iCloud drive seems to not be recorded (unless I'm missing something or do not wait long enough).

    So I need to recreate the container, if possible. Is it possible to do it without having to reinstall OS 10.11.6?

    I'm not sure I know what notes, your average container. I have no record of notes in iCloud drive or system preferences > iCloud > manage, I don't see where else you would mean that if you were opening the hidden locations.

  • After the backup hard drive cloning ARD launch

    OS: 10.11.6 (issue which happened on 10.11.5; update today to see if this helped)

    Recently, I reformatted my hard drive to correct some wacky partitioning I played with and cloned my rear disc of a direct clone of CCC.  Also, I recreated my restoration, installation of Boot Camp and installed Windows partition.

    Then, I went to launch the Office remotely and received the following error:

    As a logical person, I uninstalled the application by following the steps here, reinstalled and restarted... to get the same error.

    At this point, I have Google would be a bit and found mention of a permissions issue which was that other people having the same problem.  I checked my diary and here, I got the same errors:

    The strict solution seems to be to delete this folder and recreate it.  First of all, I did this by connecting to the recovery partition and deleting the folder 'C' via the Terminal I didn't so not disable controls system integrity.  This resulting no change on a restart, even after do it again, uninstalling Remote Desktop, and then reinstall.

    Then I disabled the system integrity (csrutil disable) in recovery and started to remove it when it is started.  I ran across the same as hoops above because it does not work all the time.

    I even went away so crazy just now as to delete the folder of higher level instead of just the subfolder 'C '.  That no longer works.  I changed the permissions on the folder to 777.  No change.  Changed the owner to my user account because he invites him for an administrator account.  No change.

    I went to the ARD support page and tried to present a real ticket, but it turns out that the ARD is not in the list of software that you can file a ticket on.

    I'm out of ideas.  No luck, can anyone provide some guidance?

    Hi, I have exactly the same problem the first time, I don't have the link with a CCC clone, but this morning (after a clean install because of this problem), I cloned my boot on a new SSD drive and this issue comes up with the clone. I reboot the original disc and ARD works on original, CCC is causing the problem, I made several clones with previous systems without problems, so it's probably a mixture of Capitan/CCC/ARD pure problem.

    I left a message of support to the CCC with a reference to your thread.

    hope for solution too... for the first time in my life of Apple that a problem needs a new facility...

  • How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

    How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

    Pure how to install OSX on a Fusion drive and keep the recovery disc function

    These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

    These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

    WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

    This is the target disk partitions, and the configuration that we want to achieve.

    Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

    Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

    There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

    Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_CoreStorage GB LVG 121.0 disk0s2

    3: disk0s3 Apple_Boot Boot OS X 134,2 MB

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 3.0 to disk1

    1: EFI EFI 209.7 MB disk1s1

    2: disk1s2 Apple_CoreStorage TB 3.0 LVG

    3: disk1s3 Apple_Boot Recovery 650.0 MB HD

    / dev/disk2 (internal, virtual):

    #: NAME SIZE TYPE IDENTIFIER

    0: Apple_HFS Macintosh HD + 3.1 TB disk2

    Logical volume on disk0s2, disk1s2

    0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

    Fusion unencrypted drive

    Here's how we do it.

    • A. clean reinstallation of Mac OS x.
    • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
    • 2. create the OSX install USB, insert it to the MAC workstation.
    • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
    • 4. in the menu at the top of the screen, select disk utilities.
    • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
    • 6. If his success, then go ahead to install OSX new to that partition, as usual.
    • 7. otherwise, if it does not, that means fusion drive has been damaged.
    • 8 follow the instructions below to fix it.
    • . B. Split disc Fusion in the physical hard disks
    • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
    • 2. in the menu at the top of the screen, select utilities and Terminal.
    • 3. on the screen of the terminal type:
    • Cs diskutil list.
    • You will see something similar to the screen below.
    • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
    • diskutil deletevolume cs UUID
    • For example:
    • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
    • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
    • diskutil cs remove UUID
    • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
    • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
    • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
    • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
    • cat/etc/random >/dev/disk0
    • cat/etc/random >/dev/disk1
    • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
    • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
    • 2 do the same with the mechanical hard drive.
    • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
    • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
    • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
    • 6. we must now test if the recovery hard drive partition works.
    • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
    • 8. it is important to test and make sure that the partition of hard drive recovery.
    • D. recreate the fusion drive
    • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
    • 2. in the menu at the top of the screen, select utilities and Terminal.
    • 3
    . on the screen of the terminal type:
  • diskutil list.
  • You should find that we have a list of disk group hard physical volume only, no logic here still.
  • 4. you will see something similar to the screen below.
  • 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
  • 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
  • 7
  • . Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
  • The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
  • For example:
  • diskutil cs create fusiondrive disk0s2 disk1s2
  • diskutil - the version of disk utility command line.
    cs - This calls for Core Storage, which is necessary for the merger.
    create - creates a basic storage group.
    nom_lecteur - is the name of the drive and how you want that he
  • appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

  • driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
  • It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
  • 8. you will see something like below appear on the screen:
  • Creation Volume logical storage of kernel
  • Move isk0s2 storage of carrots
  • Disk1s2 of switching for the storage of carrots
  • Waiting for logical volume group appear
  • Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
  • Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
  • Finished CoreStorage operation
  • 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
  • 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
  • In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
  • For example:
  • Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
  • diskutil - once again, this is the version of disk utility command line.
  • cs - called the basic storage functions, which are necessary for this arrangement.
  • createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
  • groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
  • jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
  • VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
  • size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
  • 11. go to diskutil to verify that you can see this new partition on the list.
  • 12. test by erasing all the data from it.
  • 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
  • 14. This will allow you to keep the recovery disk feature.
  • X. how Prime to recover partition
  • Press and hold the command and button R set immediately after hearing the bells to boot.
  • Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
  • Y. how-to boot OSX install USB
  • Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
  • Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.
  • Restore factory for 3 TB Fusion Drive settings

    I should just come here first, Apple phone support has been no help at all, took two officers to just make me an appointment at the Apple Store for tomorrow.  I'm sure they were also just guess what to do.

    I decided to format and restore my iMac with screen Retina 5 k, there is a merger of 3 TB drive.  I would just restore the drive to merge its factory settings which seems just a partition that includes the SSD & HDD together... I think that RAIDed... I'm not really sure, I've been googling and I am even more confused now.  I'm having the hardest time and whenever I try to delete a partition or delete something that I feel like I'm making it worse, which is why I called Apple, but they were not useful.

    Does anyone have any suggestions?  I have no other drive connected to my iMac.

    Is there maybe a terminal command to restore the unity of fusion to its original state so I can install El Capitan again?

    I've attached a picture of disk utility where I left with telephone support from Apple.

    N ° the SSD & HDD are not searched in a merger player. They linked together in a logical volume so that the data can be promoted and demoted to maintain the data that you use on the SSD and the data that you do not use the HARD disk. Giving you the SSD performance but a hard disk storage space.

    You will find indications to recreate your Fusion drive to the http://blog.macsales.com/15617-creating-your-own-fusion-drive

    I hope that you have a backup because only when you have completed this procedure the Fusion drive will be empty.

  • Satellite A660 - 11 M optical drive will not write to CD or DVD

    I got my A660 for about 9 months and it was burning without any problem but about a month ago, I tried to burn a DVD and the operation failed.

    Since then, I have tried a number of different CD & single layer / double layer DVD which all failed.

    I also ran the factory reset to recreate the image on the laptop, but the same problem persists.

    The drive seems to be written the drive normally until the end when it fails, then there is no visible trace on the disc and the machine will always be recognizes it as empty.

    There seems to be no problem in playing discs, just write down them.

    Does anyone know if there is an update of the firmware available for the reader?

    Which app to use for writing to the disc?

    To be honest I have think don firmware t update will change anything. I assume that there must be a problem with the calibration of the lens.

Maybe you are looking for

  • Firefox in bulk and I have to start?

    I use Firefox to go online to my Bank. Today, the tab of the Bank was under 'most visited' and not the tab for my Bank. Also, I always delete the places I was today and I don't see this option today. I can access the page of the Bank, but things just

  • Re: Need driver for SM Bus for Satellite P305D-S8828

    I just went down to XP Pro SP3 and the only driver I'm missing is the SM Bus controller. I think what I'm looking for are the drivers for the chipset AMD M780V, but I don't know I am unable to locate any drivers for this chipset, any help would be gr

  • How to measure the frequency of a clock using meter in LabVIEW?

    Hi guys,. Someone knows how to measure the frequency of a signal introduced in LabVIEW (in the FPGA PXI-7813R), using a counter in LabVIEW? Essentially, I want to use this counter as a kind of Logic Analyzer. Thank you, Anoop

  • Duplex printing Officejet 7610

    I just installed the duplex printing accessory and am unable to do duplex printing. Mavericks 10.9.4, version 2.0 driver running. I went to the preference of the components/Printers & Scanners / Officejet 7610/Open queue print/settings, but there is

  • How can I find my PID?

    How can I find my product id (PID)?  A press the said instruction and break windows key but I don't have a 'break '. Another statement saying go to control panel and find properties... nothing called "Properties".  Sorry to be so stupid.