Recurrent BSODS even after the repair facility. Hardware failure? Driver conflict? Help, please!

I was troubleshooting my BSOD for about a week and I need help.

Here's where I am. I cleaned the chassis and reinstall all components. Then I ran memtest for 8 passes without error. Then I got Majorgeeks through my dieting rigorous anti-malware. And there is no malware on the computer.  I could not find any obvious driver conflict. So I ran SFC/scannow and it found some errors, he couldn't fix. So I finally did a repair installation to see if file system cleaning would eliminate blue screens.

I always get a BSOD.

Which leaves me with what? A bad GPU? Unknown driver conflict? Bad motherboard?

Here comes bluescreenview log for you to look over. If someone could help me please clarify, I'd appreciate it really any help I can get.

Thank you.

==================================================
Dump file: 073014-27892 - 01.dmp
Crash time: 30/07/2014-15:26:46
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x0000000a
Parameter 1: 00000000'00000088
Parameter 2: 00000000'00000002
Parameter 3: 00000000'00000001
Parameter 4: fffff800'03656666
Caused by the pilot: NDProxy.SYS
Caused by the address: NDProxy.SYS + c8856a
File description: NDIS Proxy
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\073014-27892-01.dmp
Number of processors: 6
Main version: 15
Minor Version: 7601
Size of the dump file: 286 280
Dump of file time: 30/07/2014-15:27:42
==================================================

==================================================
Dump file: 073014-27892 - 01.dmp
Crash time: 30/07/2014-15:26:46
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x0000000a
Parameter 1: 00000000'00000088
Parameter 2: 00000000'00000002
Parameter 3: 00000000'00000001
Parameter 4: fffff800'03656666
Caused by the pilot: NDProxy.SYS
Caused by the address: NDProxy.SYS + c8856a
File description: NDIS Proxy
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\073014-27892-01.dmp
Number of processors: 6
Main version: 15
Minor Version: 7601
Size of the dump file: 286 280
Dump of file time: 30/07/2014-15:27:42
==================================================

==================================================
Dump file: 080114 43243 - 01.dmp
Crash time: 08/01/2014 12 h 22:50
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x0000000a
Parameter 1: 00000000'00000088
Parameter 2: 00000000'00000002
Parameter 3: 00000000'00000001
Parameter 4: fffff800'036 has 3666
Caused by the driver: vga.sys
Caused by the address: vga.sys + 2a7f56a
Description of the file: VGA/Super VGA video driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\080114-43243-01.dmp
Number of processors: 6
Main version: 15
Minor Version: 7601
Size of the dump file: 285 832
Dump of file time: 01/08/2014-12:24:17 AM
==================================================

==================================================
Dump file: 080114-29359 - 01.dmp
Crash time: 01/08/2014-16:14:11
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x0000000a
Parameter 1: 00000000'00000088
Parameter 2: 00000000'00000002
Parameter 3: 00000000'00000001
Parameter 4: fffff800'03663666
Caused by the driver: USBPORT. SYS
Caused by the address: USBPORT. SYS + 1156 has
File description: driver Port USB 1.1 & 2.0
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\080114-29359-01.dmp
Number of processors: 6
Main version: 15
Minor Version: 7601
Size of the dump file: 286 344
Dump of file time: 01/08/2014-16:15:09
==================================================

==================================================
Dump file: 080414-142319 - 01.dmp
Crash time: 08/04/2014-21:24:14
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x0000000a
Parameter 1: 00000000'00000088
Parameter 2: 00000000'00000002
Parameter 3: 00000000'00000001
Parameter 4: fffff800'03662666
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 75bc0
File description: NT kernel & system
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\080414-142319-01.dmp
Number of processors: 6
Main version: 15
Minor Version: 7601
Size of the dump file: 286 544
Dump of file time: 04/08/2014-21:25:25
==================================================

Thank you!

IRQL_NOT_LESS_OR_EQUAL (a)

This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

Bugcheck A, {88, 2, 1, fffff80003662666}

0: kd > k
Call child-SP RetAddr site
fffff800'00b9c038 fffff800'03681169 nt! KeBugCheckEx
fffff800 '00b9c040 fffff800' 0367fde0 nt! KiBugCheckDispatch + 0 x 69
fffff800'00b9c180 fffff800'03662666 nt! KiPageFault + 0 x 260
fffff800 '00b9c310 fffff800' 03685df3 nt! KeInsertQueueApc + 0x42
fffff800 '00b9c370 fffff880' 04a96f16 nt! IopfCompleteRequest + 0xb63
fffff800 '00b9c460 fffff880' 04a64fb7 usbhub! UsbhPdoInternalDeviceControl + 0x4fe
fffff800 '00b9c4b0 fffff880' 014da2b0 usbhub! UsbhGenDispatch + 0 x 57
fffff800 '00b9c4e0 00000000' 001eed06 ffusb2audio + 0x52b0
fffff800 '00b9c4e8 fffff880' 016884ba 0x1eed06
fffff800 '00b9c4f0 fffff800' 0368c85c tcpip! TcpPeriodicTimeoutHandler + 0 x 714
fffff800 '00b9c570 fffff800' 0368c6f6 nt! KiProcessTimerDpcTable + 0x6c
fffff800 '00b9c5e0 fffff800' 0368c5de nt! KiProcessExpiredTimerList + 0xc6
fffff800 '00b9cc30 fffff800' 0368c3c7 nt! KiTimerExpiration + 0x1be
fffff800 '00b9ccd0 fffff800' 036798ca nt! KiRetireDpcList + 0 x 277
fffff800'00b9cd80 00000000 00000000' nt! KiIdleLoop + 0x5a

ffusb2audio.sys (driver of USB 2.0 audio Focusrite) refers to an invalid memory (0000000000000088).

0: kd > lmvm ffusb2audio
start end module name
"fffff880 ' 014 d 5000 fffff880 ' 014e7000 ffusb2audio T (no symbol)
Loaded symbol image file: ffusb2audio.sys
Image path: ffusb2audio.sys
Image name: ffusb2audio.sys
Timestamp: Wed Oct 13 11:40:18 2011

Very old driver, I recommend just completely uninstall the software and remove the device (if any).

Kind regards

Patrick

Tags: Windows

Similar Questions

  • Unable to activate Windows XP Home Edition after the repair facility.

    Of that, I was running a Dell Dimension 5000 bought from the Dell website in 2005. After this computer from run very slowly, I decided on an upgrade. So I removed the hard drive of this computer with XP Home Installation and everything what it intact and plugged the hard drive into a completely new computer (that I bought and customized piece by piece). I also installed Windows XP Pro using the ability of XP to run dualboot. Now the Pro works well, but has of course none of the programs of the host OS installed as even if Pro and Home are installed on the same drive C, Pro of course did not the registry of home settings. That's fine, but when I chose the House to the splash screen immediately after my computer upward once again, I have encountered an error saying that Windows has shut down the computer to prevent damage etc. by a blue screen of death. So I fixed installed House, by inserting the Home CD in the CD drive (which is also new and I bought, not even the one from my old computer to 2005), choice of APPETIZER and not the repair console and then clicking R to repair the detected existing OS. I fixed installed and I was thrilled when the problem has been resolved. When I chose the House and after having set up, I was greeted by the familiar screen with users that I had set up on my PC of 2005. When I clicked the user admin, typed the password, he accepted the password and then a box came up saying I had to activate Windows before I could open a session. By clicking on the number resulted in the user disconnects automatically before the start menu or desktop appeared. Clicking Yes led me to a screen that gives me the choice to choose between online and phone activation. As my entire computer (except for the hard drive) is new, the internet network adapter is also new, and that's why the internet settings (the 2005 model old) which I had not yet changed on the Pro Installation do not allow me to activate via the net. I tried via telephone following all the instructions and punch in the 25 digit code generated by the wizard in the phone and told me that the operator could not generate a code (for me 2 type in the boxes provided and therefore use to activate XP Home). I then shut down the PC, went to the installation of Pro, changed the IP settings according to the instructions given to me by the ISP to the phone and checked the net now works on installation of Pro IE. It worked, and I now turned off, chose the House and tried to activate on the net and there is not yet well make sure that my computer is connected to the net. I even clicked on the phone option and changed my ID by typing my OEM 25 product key numbers and clicking Refresh. I tried again by phone and still could not activate my installation in a House. The installation CD home I used was the 2 me by my Builder (a purple disk saying OPERATING SYSTEM: ALREADY INSTALLED on YOUR COMPUTER). This CD certainly isn't a forgery because I ordered directly from DELL and not even the 2005 Bill to prove it. Is it because I changed my system components and not my hard drive with it, which is the origin of this problem? How can I fix this without backup everything and remove the installation of the House and then re - install?

    "ArjunC" wrote in message News: 3df4138b-2174-4cb1-821e-0527dc60da2c...

    In fact the Windows XP Pro has been installed by the people who moved the hard drive to the new computer. I never asked for it. But remove XP Pro still wouldn't solve my problem. I need to find a way to use my original of 25 characters product key or get a key of success generated by phone so that I can log on to Windows XP Home Edition and continue to use my PC as how I used my old. Some people have told me that I can convince to install MS by phone that I transferred the disk hard - 2 a new computer and then tried a repair but the problem is that all the numbers given on Activation Wizard phone are automated, giving instructions, asking the ID generated by the wizard and then telling me that they are unable to generate an ID for activation. If there is human here, how do you convince a machine of my innocence :)

    You need to reinstall using an XP Home OEM disk - see if one of your friends has one you can borrow. The key on your COA sticker will be valid for this.
    You can also contact Dell and ask them to provide a set of disks in your machine - for a price.

    --

    Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  • When you go to my site of banks, FF don't automatically keeps my ID and/or password. Tried the repair of cookies without result. Help please.

    I want FF to automatically populate my user ID and password when I visit my site of banks. I tried to look at the repair of cookies information, and that doesn't seem to help. What else?

    Thanks, but that's what I said, the shape forbidden to save the data:
    < form autocomplete = "off" >.

    When autocomplete is off, FF is not able to store the login/password. You can force Firefox to autocomplete, but it is at your own risk, see http://www.techzilo.com/force-auto-complete-fill-forms-firefox/ (or search on Google).

  • Constant BSOD, even after the restoration.

    I recently bought a HP a6554f computer.  Here's the specs: Intel Core 2 Quad Q6600 / 2.4 GHz 64-bit processor, 5 GB DDR2 SDRAM and I put in a GeForce 8500 gt when buying with a 550w PSU. I'm running on Vista Home Premium 64-bit.

    For several weeks it worked fine until one day I got my first blue screen.  After all initially that I would get one here and there, but I don't mind really until they began to become one every day, sometimes several times a thing of the day.  After a while, he was several times a day, so I started running memory tests that showed no problem, updated my drivers, attached to the top of my registry, updated my BIOS and done everything I could find on the internet.  I decided to restore the settings by default, and as soon as the operating system reinstalled, I got another blue screen.  I constantly closing the different host process and the windows update does not work.  Everytime I try to update downloads updates again and gets stuck their installation.  My next step is installing a copy of Vista Ultimate to see if a clean, new operating system will work.

    Any ideas on whether changing the operating system works, or if there is nothing else I could possibly do to solve these problems?

    Certainly a bad memory. You should test each of them separately. Time to call HP and have them send more or send in for repair.

    Please check your private messages.

    Message edited by dmhoo29 on 03/16/2009 20:27
  • Windows Vista does not respond after the removal of a usb device! HELP Please!

    I have windows vista for my PC and I noticed that most of the time when I remove a usb device, the computer is unresponsive and crashes on me shortly after. And I won't have any choice but to cut the main power supply if the computer shuts down. I know that this cannot continue and will eventually damage the computer. Is there a solution and why this can happen?

    Hi ClaudL,

    1. this happens with all type USB devices?

    2 when was the last time it was working fine?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows XP infected object-keep coming back even after the execution of malware: HKEY_CLASSES_ROOT\regfile\shell\open\command\ (default)

    I have a recurring problem with the same recurrent infection, even after it has scanned and quarantined.  I even disabled the system restore so it will not be awarded in the registry when you run the Malware scanning program but it comes back. I had an infection Trojan.Zelolaces! inf a few months ago but it think that it has been fixed.  Completely, I reformatted the hard drive and got help with her Dell but I'm just not sure now with this continuing return of this infection.  Every now and then I also strange things happen with my files such as things appear in them outside the folder as an image of what is in the folder but when I open the folder, that is not actually in the file.  I do a lot of embroidery and have a lot of files for my embroidery machine stored on the computer.  Sometimes it seems that some of the files disappear as they just disappear.  It was part of the problem, when I had the Trojan horse.  If anyone knows what I have to do to fix this I am of course happy to help.  The following two paragraphs are messages that I get after scanning with malware.  Also, I have two external backup drives.

    Again, here is what appears when I run a scan with Malware:objects infected: HKEY_CLASSES_ROOT\regfile\shell\open\command\ (default)...

    Then under other: bad:(NOTEPAD.) EXE%1)good:(Regedit.exe"%1")

    Thanks for any help you can give me. Jan

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • Since this morning updated (01/11), my policy is so tiny that I can't read anything. This, even after the DOUBLING of the size of my font in tools. Unless this is addressed, I can't use Firefox more, because I don't SEE anything.

    Since this morning updated (01/11), my policy is so tiny that I can't read anything. This, even after the DOUBLING of the size of my font in tools. Unless this is addressed, I can't use Firefox more, because I don't SEE anything.

    I tried NoSquint (looked simpler) and that did the trick... I am now back to where I was before this upgrade. Thank you.

  • Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

    Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

    This has happened

    A few times a week

    == I see only the program in the Manager of tasks over the past months but the problem could took place for more

    See this:
    https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

  • Problem of scanning even after the use of HP print &amp; scan doctor

    Hello

    I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

    It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

    A real quick help will be appreciated...

    Hi alb7039,

    Follow the steps below to update the software to the latest version.

    First step: clear temp directory

    1. tap folder in the race or search programs and files of field

    2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

    3. proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know what you find?

  • HP Director launch even after the installation of the updated software. HP Officejet 5510.

    Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

    Any ideas?

    [Personal information]

    Hello drudgedread

    Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

    First step: clear temp directory
    Type %temp% term or search programs and files of field
    Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    Proceed to step 2 below
    Second step: downloaded and extracted to your system:
    1 download the drivers and full software features
    Complete features Officejet 5510 software
    2. once the download is complete, double-click the file to extract the software.
    3. when the installation window opens, press the Cancel button to stop the installation
    4. tap folder in the race or search programs and files of field
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. right click on the folder and select copy
    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
    8 open the 7z, that you just copied on your desktop
    9 open the Util folder
    10 open the CCC folder
    11 start the uninstall_L4
    12. once the uninstall is complete, restart the computer
    13. run disk cleanup from the tools Accessories\ system under all programs folder
    14. download and install the latest version of Adobe flash player
    Adobe Flash Player
    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

  • Automatic updates do not work after the repair of the windows XP operating system

    automatic updates of Windows do not work after the repair of the operating system

    Hello

    What exactly is the error message? Updates download? Are they trying to install but do not?

    Here are some common steps that you can take to solve the problem:

    http://support.Microsoft.com/kb/883614

  • I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

    I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

    Hi jcyho,

    Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Unable to activate Windows 7 after the repair of the equipment

    Recently, I received my motherboard fixed for a problem with the display. After the repair, my basic Windows 7 Home Edition is not be re-enabled. My product ID is 00346-OEM-8934407-80437. Help, please

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • deployment of imagery-vs is on alert, even after the redeployment of imaging - vc.ear

    Hi all


    Having extended the domain to include the IPM and the University Complutense of MADRID, I found that the deployment of imagery-vs is in warning state. but I am facing the same problem even after the redeployment of the imagery-vc and I get under the same WebLogic console reason: -.

    ""MDB application Imaging -vc is NOT connected to e-mail System. ' "


    Help, please.


    Kind regards

    Vipul Verma

    Thanks Amey and Srinath for quick answers. Version of WCC is 11.1.1.8.0

    The problem is resolved after you set the IPM server as a target in the jms Viewer.

    Kind regards

    Vipul Verma

  • I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE

    Hello

    Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?

    SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';

    TABLE_NAME, TABLESPACE_NAME

    ------------------------------ ------------------------------

    TEST2 USERS

    TEST USERS

    SALGRADE USERS

    USERS OF BONUS

    USERS OF THE EMP

    USERS OF DEPT

    6 selected lines.

    SQL > exit

    Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    [oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf

    [oracle@localhost orcl] $ sqlplus scott/scott

    SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015

    Copyright (c) 1982, 2009, Oracle.  All rights reserved.

    Connected to:

    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    SQL > select count (*) from test2;

    Select count (*) from test2

    *

    ERROR on line 1:

    ORA-01116: error opening the database file 4

    ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'

    ORA-27041: could not open the file

    Linux error: 2: no such file or directory

    Additional information: 3

    SQL > select count (*) of the test;

    COUNT (*)

    ----------

    5000

    SQL >

    The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.

    Hello

    The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)

    You can see if you have lsof installed

    just try

    lsof | grep datafile_name

    Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.

    See you soon,.

    Rich

Maybe you are looking for

  • How to install qosmioplayer on G10

    Hi allI have a problem. I can not install on my G10-104 qosmioplayer. I was download .zip-31-qoplay of this ftp http://support.toshiba-tro.de/tools/qosmio/f10-g10/qoplay/qoplay-31-en.zip. Unzip and burn the bootable CDROM. When I boot this install fr

  • NETGEAR WG511T PC Card works fine on Satellite Pro A10

    A Netgear WG511T 108 Mbps Wireless PC Card works perfectly on this laptop?Thank you

  • macbook pro sale want to change of Directors

    I'm selling my MacBook Pro and want to remove myself as admin have yosemite OS X and don't have a disc.

  • Adapter WiFi does not see my link ap?

    Hi, I have HP ProBook 4530 s and I stand bad upgrad Windows 8 so work net adapter see all wifi network round accept my access point! so I don't know what to do and I am looking for driver for windows 8 and found nothing! My adapter is realtek

  • BlackBerry Z10 help with ringtones

    I downloaded the new tones from the 'Business ringtones' application and they went into my music folder, as they should. Fine. I'm going to change my tone e-mail, clicking settings, Notifications, Applications, email /(my email account)/Tone/browse m