Red display on my Qosmio G30 (PQG30E)

Similar Questions

• Update the display drivers for Qosmio G30

  I have a Qosmio G30-240, it will not play a game. I bought halo 2, but says I have to update my drivers, but there is no update I received new drivers of Toshiba but still the same problem. Display driver is NVIDIA g force 760 GB. Any ideas please?

  Hello

  As you know, the game can be played to laptop and desktop PC. Update driver for desktop PC is not so problematic and can be done more often than on laptops. Never force drivers of graphics cards to run with the best performance. For laptops, it can be problematic because greater performance is more heat inside the laptop. because of this laptop manufacturers can't offer display so drivers often but you can visit some u = independent pages like http://www.laptopvideotogo.com/

  You might find something there.

• Qosmio G30 - E10: display resolution changes from 1920 x 1200 to 1024 x 768

  Hello

  Display resolution of Qosmio G30 - E10 passes sometimes 1920 x 1200 (my default) to 1024 x 768 after returning from standby or Hibernation

  I run Vista Ultimate, most recent display of the download area of Toshiba driver.

  This happened at any time, but sometimes.

  Any solution to this situation of bases.

  Kind regards

  Uwe Meyer, Germany

  Hello

  It's really not easy to say why it happens. I think that it of difficult to reproduce this problem, because it happens that sometimes ;(
  You said you are using Vista Ultimate.
  Have you checked if this happens using the Vista OS since the Toshiba Recovery CD?

  It would be very interesting to know if this occurs on laptop with Toshiba to factory settings.

  I found a thread on a similar theme;
  Someone suggested to update the graphics driver.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22553&MessageID=82906

  Perhaps a graphic driver of the www.omegadrivers.net or www.laptopvideo2go.com might help.

• Qosmio G30-161 PQG30E: HD-DVD, it does not work

  HI -.

  I have the specifications of the models below, and when I try to use a HD-DVD it does not work. I followed another thread re HD DVD but it seemed to apply only to Windows Vista, but as you can see below I just Windows XP but apparently the HD ready display.

  Any ideas? Thank you, Robin

  Qosmio G30-161
  Part number: PQG30E-024024EN
  Main features
  -Technology Intel Centrino Duo Mobile T2300 to Intel Core Duo processor
  -Genuine Windows XP Media Center Edition
  -120 (60 + 60) GB HDD
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -17 "screen Toshiba TruBrite WXGA + TFT
  -Drive DVD Super Multi (Double Layer)

  Sorry but I don't understand your problem. You wrote just HD-DVD, it does not work. What exactly do you mean? The optical disk drive does not work or you can't watch HD-DVD movies?

• Display and boot on Qosmio G30-117 problems

  Hello

  My Qosmio G30 (117) has problems to start. Basically the Qosmio title displays properly, but as soon as Windows XP appears, it is as a grid of white dots on the screen. He will then drain and take forever to get into windows. The grid of points remains all the time.

  My hypothesis is that sound my display driver, but get an update is a challenge. When I try to download from the page drivers it says that there is none. The search is based on the model of my PC, it should be no wizard

  I can't get into XP in safe mode.

  Real question is, is this my driver or is this a hardware problem?

  Thanks for your help,
  Peter

  Hi guy,

  that looks a little a hardware problem but before we get into it, you should download www.laptopvideo2go.com drivers (Please read the FAQS on this site!) and then, if the problem persists after installing new drivers, you must contact a local authorized toshiba service.

  I give you a link if you really want to contact an ASP (Authorized Service Partner):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck buddy and good weekend

• Qosmio G30 display flickering and cannot connect to Windows

  I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
  Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

  After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
  My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

  Appreciate your advice before contacting the local support team.

  Thank you very much!

  Hello!

  That s a strange question. Do you have the same problems on an external monitor?

  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
  Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Qosmio G30 - there a way to display the temperature of the graphics card?

  Hello

  I've got Qosmio G30-10B. Anyone know if it is possible to obtain information on the graphics processor (GPU) temperature, unit? It has nVidia Go 7600 graphics card. Unfortunately, the nTune doesn't display the temperature. Any other application that could do the trick?

  Thank you.

  Hello

  Temperature, GPU monitoring tool? hmm I know on some graphics cards nVidia, you can find this information in the properties of the graphics card. But I m not sure if it of possible to see in the properties of the graphics card for laptops.

  On my desktop PC, I have installed applications RivaTuner. This tool is amazing, and you can control the various GPU parameters. But note!
  This tool is can change many settings of GPU and if anyone has any experience can damage the graphics card. So don t change anything if you don't know what you're doing!

  Concerning

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Qosmio G30 - 102 error display

  Hello

  In the space of one morning my LCD screen went from showing slight quirks to unusable as follows: Notebook details on foot.

  -Green mottled on Windows XP desktop background
  -restarted Windows XP OK todesktop, entire screen begins to blink on/off every few seconds, Win XP MCE booted up OK well
  -distortion of the images on the screen
  -now just blocks of color colours: white, green, cyan, flashing text etc.

  This is visible in the BIOS from Setup menu. Secure boot does not end

  Tried to output for external monitor, but not on a signal so not lock external of image at all.

  Enjoyed any insght on the problem. Not sure if chip screen or video. Is either a setting value when approximately 2.5 years.

  The BIOS is the original version 1.60 ACPI cannot see enough screen to try an update.

  I tried reinstalling all components - hard drives, RAM, took out battery ran on sector etc.

  concerning
  David (in the United Kingdom, UK purchase a Qosmio)

  Qosmio G30-102
  PQG32E-01600VEN
  Series X66249xxxG
  Windows XP MCE

  Looks like the GPU has a problem.

  I would like to send the laptop to an ASP (authorized Service Provider) for repair. There is a list of the ASP on the Toshiba site.

• Display driver cannot complete installation on Qosmio G30-137

  I just bought qosmio g30-137 of the Germany. My laptop had a German version of windows and I installed winXP PRO Greek edition. I have a problem with the graphics card driver. I downloaded from the TOSHIBA site. While I do Setup search the driver files that does not exist and I can't complete installation. I would like to know if anyone knows where I can find a driver to complete the procedure or if anyone knows what the problem is and how I resolve?
  Also starting from TOSHIBA site some installation instructions that explain how to do the installation with the appropriate sequence. Also, I would like to know where I can find the chipset driver?

  Hello

  Have you installed the Windows from the original CD of Microsoft?
  Why you suggest that the graphics driver has a malfunction?

  I guess you can not complete the original installation of the Win operating system due to the RAID driver and graphics driver. This unit has been delivered with RAID function and you need to install the RAID driver at the beginning of the installation of the OS.

  In addition there is also an instruction and installation utility chipset on the Toshiba driver page.

• Driver problem Tuner TV PCI DVB-T/analog on Qosmio G30-126 & Win7 64 bit

  Hi all!

  I have red all messages on problem Toshiba PCI TV DVB-T/Analog hybrid Tuner on Toshiba Qosmio G30-126 and Windows 7 64-bit (x 64).
  Unfortunately, I did not find solution in messages.

  I have computers portable two Toshiba, former a Toshiba Qosmio G30-126 & new a Toshiba Qosmio G50 - 12K.
  On the new there is no problem with drivers and the new Windows 7.

  On the old but there are 2 problems. We're with the drivers for the buttons that do not exist. 2nd problem and more iritating is problem driver Toshiba PCI TV DVB-T/Analog hybrid Tuner (x 64) (code 39).

  Now, I know that here probobly is no expert Toshiba ppl, but if there is any1 who has solved this problem, pls explain below how you did... at least until the Toshiba decide to new drivers relese in the near future.

  Kind regards.

  Hey mate

  The problem is that there is no Win 7 64 bit drivers made the Qosmio G30 series.
  You have to collect the drivers with your own hands!

  Here you will find a nice display:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49400

  You can test the Tuner driver for the Qosmio G45 - xxx series that seems to be compatible with the G30.

  See you soon

• Upgrade to Vista Edition Home Premium on Qosmio G30-116

  I thought I had covered until after I started the upgrade of power. To see that there are still several drivers who did not prpoerly including the video card.

  Also the test under icons was blurred. I tried several different approaches with clear Type etc. and increasin size but not luck.

  1. What is the best advice for the upgrade? is it still worth in waiting for toshiba to produce a package
  2. What are the recommendations for the establishment of siplays of Vista?

  Hello

  First of all you need to know what are the right drivers for you unit.
  It seems that the Qosmio G30-116 is a part of the PQG30E series. So if you're going to download all of the drivers that you must choose that number in the download form pilot!

  I checked the Toshiba page and unfortunately, I didn't find that several drivers for Vista as RAID driver or stack of BT.

  However, it seems that you must update the BIOS before installing Vista.

  But now for you questions:

  > 1. What is the best advice for the upgrade? is it still worth in waiting for Toshiba to produce a package
  Well, I would recommend install clean Vista separately on a second partition.
  And Yes, if you want to use the whole functions to wait for Vista drivers

  > 2. What are the recommendations for configuring Vista displays?
  After the version of the graphics driver you should simply install it. The driver will choose the best settings.

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• I don't see that drive HARD install Win7 in Qosmio G30

  Hello world

  I tried to install win 7 64 bit in my Qosmio G30. The first problem was when, in the early stages, Setup did not find hard drive. Exactly, he told me that any pilot has been found. logically, if it does not find the drivers, including the hard disk drivers that I couldn't install win 7.
  I see the hard drive in the BIOS, but I can't change its configuration. It is as if it is locked

  Worst of all is that I'm trying to take the win XP but I can't start the operating system. The message is: ' Could' open drive.

  Please, do you know what is the problem?

  Thank you

  Before you start the installation of the OS you need to load the SATA driver. Check please download from Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp page if you can find it here. If this is not the case, let us know.

  I can't find it for you because I know what Qosmio have you (PQG30E or PQG32E).