Redefinition of the Dell Pro 8 place

Similar Questions

• Unwanted icons on the Dell 8 meeting place

  How can I remove icons for applications on the main screen?

  Hold your finger on the icon until it becomes mobile, can he drag on x and liberation.

• Keyboard Slim lose the connection with the Dell coming 11 Pro

  Someone meets keyboard slim interruption of connection with the Dell pro 11 site?

  He might have to unplug the keyboard, and the re - attach the keyboard to the Tablet again to use the keyboard.

  I have two Dell 11 pro + keyboard slim venue. Both devices have this kind of problem.
  It's absolutely wrong.

  How to solve this problem?

  Besides working with Dell Pro they explained to me that the keyboard must be used on a flat surface (not towers for example) and the keyboard & tablet should be at an angle of about 117 degrees between them.  Now, of course, you can't measure it, so just assume if you use on a table or desk and its supported properly you have to the correct angle.

  I find that if the keyboard does not after sleep or start arriving, simply lift the keyboard out of the surface of the table a few inches and let it fall down.  It will immediately start working.   I think that there is a sensor in the keyboard, which is not always realize or to calibrate properly in coming to life.

  If you have complications beyond the keyboard chip out of sleep, I'd take it upward with the support to push the issue.

• Dell Pro 11 venue will not be upgraded

  My Dell Pro 11 place will not be upgraded Windows 10. It is said: ""Windows cannot be installed because this PC has a provision of disc not supported for UEFI firmware.". When I got my tablet, it upgraded to Windows 10 fine. However, I had to send the tablet in for repairs, and Dell reset the OS to 8. Now I can not upgrade to Windows 10 once again, receive the error initially. Please help me with this, I have already used up a lot of options and need 10 Windows to work. In addition, the free update of Windows 10 ends in 9 days.

  I was able to pass to the Win10. Obviously, reinstalled Dell Win8 use MBR partitions. On another PC, I had to create a Win8 USB installation, boot from that on my Tablet and delete all partitions. I then installed Win8 using a new partition in TPG. Once 8 has been reinstalled, I installed the driver for the wireless card from the Dell Web site, and then I upgraded to 10 without problem. Then I reinstalled the other drivers from Dell Web site, so that I could use the touch and other screen.

• Meeting place for DELL Pro 8 - option missing sleep after updated

  I own a DELL Pro 8 meeting place. After updating drivers, the tablet will not sleep and pressing the power button is no longer in the Tablet 'SLEEP' mode.  SLEEP option is completely missing the Tablet remains on constantly even when not used.

  The updates that I applied are

  Pilot series Intel Atom Z3000

  Running reliable engine Driver Intel

  5570 WWAN and GNSS (GPS) Driver Wireless Dell Mobile Broadband

  I've found a workaround.

  I found that disable driver Wirless 5570 Mobile broadband device Windows re-activates the SLEEP feature Manager.  This would indicate that the problem is with the driver 5570 Wireless.  I tried to downgrade to a previous version of this driver, but Mobile broadband will completely stop working.

  I suppose that others have the same problem, if you have not applied the latest updates and a meeting place for Dell Pro 8 with a card 3G it would be a good idea to not update drivers at this time.

  In the end, I updated the Windows operating system files and installed A03.  Could not get A04 or A05 works not at all.

  It is clear that these updates have not been tested on the site of Dell Pro 8.  I highly recommend to avoid updating the driver for the card 3G until an adjustment for the driver of the object is released.

  The reality is that Dell has released a product with a digital pen that does not work properly and use a 3G card that does not work properly.  In general I would avoid Dell Windows tablets in the future, if you do not have to use Windows 8.1 I would recommend that you buy an Apple iPad.

  The iPad is a fantastic table.

• Why Dell has paralyzed the Panel advanced configuration options of power on the venue Pro 8?

  

  Reference paralyzed Dell Control Panel advanced configuration options of power on the venue Pro 8.

  Dell must provide a patch restores full power plan setting up advanced features of Windows.

  Adding a new default Dell Windows power plan doesn't bother me, but they must not paralyze the Panel Windows distribution, power options, or remove the standard Windows power management.

  That has something to do with the sleep settings connected / configuration Microsoft / Dell are doing on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports. With Eve logged onto the available settings are limited to what would not interfere with it. If you would change settings (e.g., SSD or Wifi Powermanagement Disabled) issues as sleep function in the process of disappearance and others. Microsoft also has requirements to be connected certified standby.
  Again, not 100% sure if it's MS or Dell do but my guess would be Microsoft because I saw the same thing with different units.
  If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

  Use the command Regedit and change the following:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
  Change the value for the key CsEnabled from 1 to 0 and reboot.
  1 means connected off standby active and 0.
  Try it and see if it solves your problem.

  BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

• Hard reset in place Dell Pro unlocked Intl

  Hello world!. I bought an unlocked device Dell place pro from ebay, so far, it has been a great phone, but it came in English and I speak Spanish mainly. I read somewhere that all wp7 devices come with some languages by default factory, including Spanish, but some carriers are limited to English language and that, if a hard reset is performed, the languages become selectable. so, here is my question:

  If I do a hard reset to my place of unlocked dell pro, it locks again? and I'll be unable to use a foreign sim card that I use at the moment?

  Please, if you can help me, I'm very happy, I'm terrified to do it and reset my phone in a State of brick. get an another Unlock code is almost impossible according to other post I read here.

  Carlos.

  Well, I finally did a hard reset on the phone and it is always open, updates are still there but the new language options were nowhere to be seen.

  In addition, some Dell help would have been very nice.

• meeting place for Dell pro screen flashing on make or receive a call

  Hello

  My place of dell pro screen start flashing once the call is established. Sometimes, the screen remains black as if swithced off. This happens all in making a call or once I answer a phone call. The touch screen is disabled for the duration of the call. Once the Group at the other end disconnects screen becomes active again. I called dell support and they advised to reset to the factory settings. Tried, but the problem still persists.

  Please tell us what needs to be done.

  Thank you...

  Hello

  Had the same issue, but took off the protective film that came with the phone and resolved immediately.

  The default phone has a battery mode that disables the display when it in next to you ear and an appeal is in economics.

  Seems the protective skin band prevents the phone to detect when its next to your ear

• Connection of the Macbook Pro to 2 monitors Dell

  According to me, I've looked everywhere and can't seem to find the right adapter to connect my Macbook Pro (mid-2012) to 2 24 Dell monitors | E2416H at work.

  My Macbook Pro:

  OS X El Capitan

  10.11.5 version (15F34)

  15-inch, mid-2012

  Processor 2.6 GHz Intel Core i7

  NVIDIA GeForce GT 650M 1024Mo graphics

  Connectivity to Dell monitors is DP (DisplayPort) or VGA.

  I really appreciate any assistance that can be provided.

  Thank you.

  Reed

  Get two port to display the mini display port cables and plug the ends displayport on the monitors and the ends of mini displayport ports Thunderbolt on the MacBook Pro.

• Place the Dell 7840 in Recovery Mode

  Our company just bought a Dell place 7840 from Best buy to test using it in our stores. Someone set up a password on this subject and we can go no longer. I access the firmware screen and can select recovery, however, after he starts, I can't do the coming recovery menu so that I can wipe and reinstall the software. Can someone tell me how to do a complete factory reset when you can't go to the device? Thank you.

  Robb

  While I've lived all this, and the steps that saw ii were:

  1. from power off, hold down the flight down and the power button until the Dell logo appears

  2. use the flight down to select Recovery, then press power to select

  3 tablet will start to screen '' no command. ''

  At this point, it is a little blurry.  I who power and flight up to three times.  Not sure it must be three times or I just squeeze them together correctly, but makes up the menu of options following which includes eraasing cache, erase user data/dfactory reset, reboot and load something like the SD card update (sorry, can't remember)

• Dell Tablet wireless keyboard does not not with the venue of Dell Pro 8

  All,

  I bought my wife a venue of Dell Pro 8 for Christmas and the Tablet Dell Wireless Keyboard.   The keyboard has been delayed until after Christmas and just arrived, but we will have problems to run.  We paired up it and controls volume and brightness keys work fine but if none of the keys work.  The Tablet click on w I also nothen you hit but no letters don't appear in the word or the IE address bar.

  We have a defective keyboard?

  Scott

  Hi Lou,

  Thank you for taking the time to answer, but as I said, we had no problem of this pairing and some of the keys worked (volume and brightness controls).

  I found the solution to the problem which has been updated from the BIOS.  It seems that the aircraft delivered in December with the original BIOS A01.  We ran a Dell utility provided with the tablet that he upgrade A03, whereupon the wireless keyboard worked fine.

  Thanks for trying to help!

  Scott

• Meeting place for Dell Pro; Update failed, recover it without success

  Hello, my 'new' coming Pro arrived yesterday and I just started to test. He had a very old firmware, not mango even, so I started updated by zune. After the third update (for the WiFi issues, I think it was the "last" wp7 update) I get an error... so I have the phone an inexplicable I tried again, without success. I have read and tested many, not even the Microsoft Update tool could help. So I started to pick it up in zune (settings, updates). The startet updated and now I always get an error of 61%. I read many things once again, I even tried to save it from another computer (copy image %appdata%\Microsoft\Microsoft phone update), but still have the same problem. So, my 'new' phone doesent start a plus, it loads just for the bootloader. I tried to get any firmware offiziel on 'standard' camera flash but I seems that DELL don't want this (nothing to download). I hope you can help me! Download the dell firmeware someware to recover my phone? THX dcpromo

  Maybe here? http://www.d-h.St/search?search_by=1&SEARCH_FOR=VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• Windows 10 build 9926 unusually heavy use of CPU on the venue Pro 7130 i3 11

  Define how the other owners of 11 Pro 7130 meeting places had good success in the management of the Windows 10 preview, I conducted today a place in upgraded from 8.1 to 10 build 9926 (the one with the Continuum, which is great), but I'm having the issue of constant between 50 and 99 percent high CPU load , with no guilty in the Task Manager. Before you go to format and do a clean install I wanted to ask if anyone knew this problem.

  EDIT: the unusually high load seems to be triggered by a process called Windows Driver Foundation - user, whose executable mode driver is wudfhost.exe.

  A complete reinstallation did not help.

  EDIT 2: If someone experience the problem, disable completely the service named "Windows Driver Foundation - user-mode driver framework" helped, with seemingly no ill effects, although after weird restarting it may need to be disabled later.

  As a warning, I note how in general, it is never a good idea to go mucking in services.msc.

  Some information about my experience with the Windows preview 10, the two pre - and after Cortana on a Dell coming Pro 11:

  1. Builds before the last Technical Preview 9926 looked much more like Windows 8.1
     1. They shared the same start menu and app store. It was almost like 8.1 with all it's bugs ironed out - and a few goodies in. Really worked well on my V11P.
  2. 9926 build adds many new features - but also adds tons of bugs.
     1. Look around the net and you will see common problems that are corroborated by many users of the technique of the preview. You will have to take the good with the bad.
  3. Upgrades (from 8.1 to 10) on-site are problematic - ESPECIALLY with the most recent Technical Preview 9926
     1. My installation of the latest version of Win10, migrate my settings 8.1 resulted in an installation with tons of questions. My Active stylus barely worked - sensor HID driver will fail to load and having problems. He would go to the mode standby and never go on low power, draining my battery. He had 100% fail still to wake up from its sleep - I would get a black screen that requires a hard shutdown and reboot. I also had the CPU usage very high with the WDF service. As mentioned above.
     2. Overall, a lot of things online really as you can imagine - and this is frankly not worth it to upgrade on site.

  So, with that said - what was the solution?

  New installation.

  Here are the steps to get the best Windows 10 installation on a coming 11 Pro (I know - in my experience).

  1. Download the version of ISO - installation of a USB disk with the utility in Rufus 
     1. Boot on it by pressing volume up several times during boot up until you get the boot menu. Then use volume up to move to the bottom of the list - low volume to select the highlight boot device.
     2. After the installation of the key USB - copy the most recent copy of Dell Wireless driver for your Intel/Dell Wireless card, a copy of 7-zip, and a copy of the latest Dell cabin Pack for the 7130 file in a directory on the USB drive (make one, name drivers or something).
  2. Install the Windows technical overview 10
     1. Delete all partitions on disk 0 (or whatever your SSD) until you have one unpartitioned space - and install it.
  3. When you first - start your screen will be slow/choppy as all hell!
     1. This is mainly due to the fact that there are very few compatible drivers cooked in Windows 10.
  4. Do not start to install the drivers from the Dell site - many will prove to be obsolete.
     1. Only install the drivers from Dell/Intel Wireless to obtain network connectivity and the internet
     2. Then install 7 - Zip and extract the CAB Driver Dell file in a directory on your C:\ called "C:\Dell.
  5. Now you have a network connection - start Windows Update
  
  
  1. Windows different Intel chipset - including video device drivers will begin to download.
  2. It will ask to reboot - let him.
• Now - if your tablet is something like mine - after it restarts, it will start flickering like hell.
  1. This is the video driver Intel panic hell. Tablet may hang - just persist through the pain and continue.
  2. I found mine to panic more with the help of the touchscreen - so I plugged a mouse.
  3. Mine has been fixed by disabling "Auto Refresh Panel" in the Intel graphics options menu (click Law Office, Graphics Options). This setting can be found under the section power options.
     1. Do it and restart. My flicker ceased thereafter.
• At this point - I expected and wanted things worked, but open Device Manager
  1. (Start menu - type "Device Manager") - or-(Start Menu-> Control Panel-> Device Manager)
  2. There was a last device without driver SM Bus controller. Click - Update right driver and point it to the directory of D:\Dell you have extracted the CAB file.
  3. It was't until what I installed the driver for the device that he would go to sleep properly connected.

Now - a word of warning. Unlike earlier versions of win 10 - my Eve connected sessions drain about 1, 500 MW/h. That's what I saw in 8.1 Win no matter what I tried - I wonder if there is some sort of driver problem - and replacement needs. My sleep study reports show some offenders - everything works for less than 1% of the sleep cycle, but the material is not a descendant to C3 to sleep, which is where the power drain is. Looks like a driver chipset of a certain type of malfunction - I'll do a trace and try to isolate the problem.

Apart from that-, all has been MUCH more stable. Sleep (although draining the battery) are coherent rock, I have the high utilization of the processor in the stronger WDF service, and the active stylus works exactly as it should.

I'll stop it between uses for now - and keep stable and see if there is a driver chipset or something that solves this problem.

• Where the coming Pro 11 w / Atom went z3770?

  I was hoping to buy a V11P with the z3770 for $499, I saw on the site of Dell USA 10 Dec, but it seems to have disappeared. I spoke with several people on the dell chat support, but they have not been able to tell me when this model will be available again or why it was deleted in the first place. The price level was perfect for my budget.

  This model of the V11P is always available on other global sites of dell, then why not Dell USA?

  Links

  Reference Dell USA (no atom of z3770, was $499): http://www.dell.com/us/p/dell-venue-11-pro/pd

  Dell Canada ($549): http://www.dell.com/ca/p/dell-venue-11-pro/pd

  Dell UK (£339): http://www.dell.com/uk/business/p/dell-venue-11-pro/pd

  He's back.  Must have been a blip.